Fedora :: 14 ATI Catalyst 10.11 Install?
Dec 11, 2010Step 1: Open TerminalStep 2: Run as root in Terminal
Code:
su -
And enter the root's password.
[code]....
ADVERTISEMENT
Fedora Installation :: Install ATI Catalyst Drivers On F14
Feb 3, 2011AFAICT, F14 does not have any formal support right now (no rpms, etc), and there are some pitfalls to using the ATI installer which I am sure have resulted in system re-installs, unhappy faces, and people stuck without a proper driver. This is because while the installer seems easy to use, it's unfriendly in so far as it does not check for pre-requisite software first, and when it craps outs, it doesn't tell you anything is wrong, but it will leave your system without a functioning X server. The first time I ran it, the GUI installer told me everything was complete and that all I needed to do was reboot! When I did, X would not work, and reinstalling the original xorg-ati driver, etc, did not fix it.....
View 3 Replies View RelatedFedora Installation :: Install Catalyst For ATI Card?
Apr 9, 2011Have a fresh install of FC14, 2.6.35.11-83.fc14.i686.PAE. After trying the Catalyst install instruction the response is this - Requires: kernel-uname-r = 2.6.35.12-88.fc14.i686.PAEInstalled: kernel-PAE-2.6.35.11-83.fc14.i686 (@updates)I do 'yum update kernel' and I appear to have the latest release.
-------------------
[root@localhost ~]# yum update kernel
Loaded plugins: langpacks, presto, refresh-packagekit
[code]....
Fedora :: ATI Catalyst 9.x Fglrx Driver Manual Install On 11?
Aug 21, 2009UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
Fedora Hardware :: Cannot Install Kmod-catalyst (ATI Driver)?
Oct 15, 2010I am running a fresh installation of Fedora 13 on a 64 bit machine. I have an ATI Radeon HD5750 video card, and I want to install drivers for it. I have tried following Leigh's guide, but I have run into a problem. I cannot install kmod-catalyst because of the following error:
Code:
[root@localhost ~]# yum install kmod-catalyst
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
Fedora X86/64bit :: Install Modded Driver As Original Catalyst Are Not Compatible With System?
May 17, 2009I have a laptop with ATI mobility 2400, and ralink wireless, I have not very experience with linux, I have tried many live-cds, ubuntu, opensuse, gentoo, fedora and all crash if I don't boot with the aditional option "clocksource=jiffies", i'm thinking of trying fedora 11 x64 but my main concern is about my ATI mobility VGA, in windows i need to install modded driver as original catalyst are not compatible with my system.
View 3 Replies View RelatedDebian Hardware :: Downloaded Catalyst 9.3 And Tried To Install, But It Doesn't Want To Install?
Jun 30, 2010I downloaded Catalyst 9.3 and tried to install, but it doesn't want to install, sorry, but i can't paste you error message, because my laptop is far away from me now. I can do it tomorrow. May be it is just impossible to install ATI Catalyst 9,3 on lenny and i should try a lower version of Debian? Could u suggest me what to do? I searched over the net for a long period of time, but found nothing relevant to my problem.
View 2 Replies View RelatedSlackware :: Can Install Catalyst 10.4 On 13.0 64
May 24, 2010I'm using ATI Radeon 4850 graphic card but cannot bring out its full configuration (one of them, I try to enable s-video out) without installing its native Catalyst driver, which is ver 10.4. Is this version compatible with Slackware 13.0 64?
View 2 Replies View RelatedUbuntu :: Way To Install ATI Catalyst Drivers?
Feb 17, 2011I've been trying to install the ATI Catalyst_11.1 proprietary driver for the past two days unsuccessfully.I've been using the instructions in this pdf from AMD's website, but it really hasn't done me any good. Despite the fact that the installation wizard says the install completed, nothing changes once I reboot.I read somewhere that it was possible to install it via the "Hardware Drivers" utility. Is that true? If so, how can I go about doing that.At the moment I've got the "ATI fire gl" driver activated, but playing videos in fullscreen is painfully slow and I'm hoping AMD's proprietary driver can help.btw, My system can run pretty much any video (HD or not) in fullscreen under Windows 7. I want the same to be true under Ubuntu.System Specs:
Model: Acer Aspire T160
CPU: AMD Athlon 64 3800+ (Socket 939)
Mobo: FC51GM (Foxconn WinFast 6100K8MA-RS)
[code].....
Hardware :: Can't Install ATI Catalyst 9.3 In Debian
Jul 21, 2010I'm "happy" owner of ATI x1250 video-card. Used manual from [URL] to install Catalyst 9.3 in lenny, but I have 64bit system,so have lot's of errors. kernel & xorg info:
[code]....
For kernel versions past the released 2.6.25, the git series. They�ve removed the tlb stuff from smp_[32|64].c and added new files specially for tlb: tlb_32.c and tlb_64.c.i'm using not proper patch, or something else, but i can't patch my kernel. I saved this text into fglrx.patch
[code]....
console asks me to provide "File to patch" because there is no such file as /arch/x86/kernel/tlb_64.c i created manually just an empty doc tlb_64.c and then launched patch but it shows:
[code]....
OpenSUSE Hardware :: Install Catalyst Center ?
Dec 30, 2010I've download the catalyst center for the 4870x2 from the ati site but how can I install it now?
View 9 Replies View RelatedUbuntu :: Install ATI Catalyst 10.2 In Karmic Instructions
Feb 18, 2010I dual boot on separate HHDs. I have just done a fresh install with updates. I installed the restricted driver from the repositories, and I get an error message from ati catalyst (administration). Also I have "unsupported hardware" at the bottom of the screen.
Graphics card is a XFX ATI HD 5770 on this system, and I just sold 2 8800 GT's yesterday, and bought two more XFX HD 5770's for CF in my other system.
I didn't do a bad thing, 'cause I was really groovin' on Ubuntu, that I just installed at the beginning of the week.
Ubuntu Multimedia :: Cannot Install Catalyst 10.00 Driver?
Nov 5, 2010I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code:
alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh
sh: Can't open ./fglrx-uninstall.sh
The uninstall.sh doesn't exist.
OpenSUSE Hardware :: Unable To Install Catalyst Drivers?
Apr 20, 2011I just upgraded to 11.4 from 11.3 and cannot seem to get the FGLRX modules to load. Every I try to load the module, I get the following error: fglrx: no symbol version for module_layoutI read through this howto with no avail: SDB:ATI drivers - openSUSE else run into this problem with upgrading?
View 2 Replies View RelatedUbuntu :: Install Amd Catalyst 11.4 For X1300 Ati Graphic Card?
May 18, 2011im running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies View RelatedDebian :: Install Bigmem Kernel With Ati Catalyst FGLRX ?
Jan 14, 2011I'm running Debian Squeeze/current fine with the default kernel & ATi's Catalyset drivers. I'm struggling to get the display drivers to work with the bigmem kernel as I've got 4GB ram on my machine so might as well try to enable it.
I can have my system work with the normal Squeeze kernel by installing the normal kernel headers & then FGLRX drivers, but after additionally installing the bigmem kernel & headers (linux-image-2.6-686-bigmem & linux-headers-2.6-686-bigmem) I cannot get the system to reach X after removing & then re-installing the video drivers.
OpenSUSE Hardware :: ATI Catalyst Graphics Driver Install Failure In 11.3
Sep 17, 2010I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
OpenSUSE Install :: Disappearing Mouse After Installing Catalyst Drivers?
Apr 6, 2010I just installed the ATI Catalyst drivers for my Radeon HD3200, and upon reboot my mouse has disappeared. I can still use it, it's just that there's no pointer on the screen. In addition, moving windows and loading/scrolling any window is very, very slow.I also noticed there's no entry for the mouse in xorg.confI have run aticonfig --intial and aticonfig --initial -f, to no avail.
View 9 Replies View RelatedOpenSUSE Install :: Get Latest Catalyst Drivers (10.3 Or 10.5) Working On Kernel 2.6.34?
May 30, 2010Has anyone been able to get latest catalyst drivers (10.3 or 10.5) working on kernel 2.6.34?
View 7 Replies View RelatedOpenSUSE Install :: Ati Catalyst 11.2 On 11.4 - Crashing Graphic Card Every Time
Mar 24, 2011I think i found out what was crashing my computer my Graphic card every time i start a game the computer goes down. I have a Ati Radeon 5570. Desktop Effects: Disabled System Info: 2d: fglrx 3d: ati I downloaded the Ati Drivers from the website after installing the Open Source not sure if that is causing a problem. Here are the steps i took. su - UNSUPPORTED="yes" sh ./ati-driver-installer-11-2-x86.x86_64.run --buildpkg SuSE/SUSE-autodetection zypper in fglrx* aticonfig --initial reboot It will crash whenever i start a game and randomly when i run ..... VLC etc.. Edit: Should i uninstall all opensource/ati and start over and if thats the case whats the best approach to this?
View 5 Replies View RelatedFedora :: F12 64-bit And ATI Catalyst 9.12 - Downgrade To XOrg 7.4?
Jan 27, 2010I've recently installed a Radeon HD 5770 graphics card, but it currently doesn't have support from any open source drivers (including MESA's experimental DRI drivers). The only other option would be ATI's Catalyst drivers, but 9.12 doesn't support Xorg 7.5 at the moment (the drivers disable Xorg; leaving a terminal only setup).
The question I've got is that is it possible to downgrade Xorg to 7.4 as a temp workaround and if so, how easy would it be to revert back to 7.5 afterwards.
Red Hat / Fedora :: ATI Catalyst Display Driver?
Jun 29, 2010I'm new to linux. I'm using fedora 13, 64 bit, AMD athlon II processor. I tried to install ATI Catalyst Display Driver for linux but its giving following message
ATI Technologies Linux Driver Installer/Packager
which: no XFree86 in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
Error: ./default_policy.sh does not support version
default:v286_64:lib::none:2.6.33.5-124.fc13.x86_64:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.tcXvmo
Ubuntu Multimedia :: Sound Playing With Terrible Noise After Install Catalyst With VA API
May 2, 2011After installing Catalyst with VA-API began a strange problem with the sound via HDMI. Prior to installing the sound worked fine. Platform: MSI E350IA-E45 with Radeon HD 6310 and AMD Zacate E350 Version of Catalyst 11.4. After installing the sound is playing with a terrible noise Sample: [URL]... I already tried all the audio outputs, but this does not solve the problem. The problem occurs only when the transmission of sound through HDMI.
View 1 Replies View RelatedFedora :: When RPMfusion Will Have The ATI Catalyst Driver For 14 In Its Repo
Nov 10, 2010when RPMfusion will have the ATI catalyst driver for Fdedora 14 in its repo? If it is going to take a log time then I might just install it from ATI's site, but I'd rather not go through all the trouble if I don't have to.
View 2 Replies View RelatedFedora :: Catalyst On F14 - Unable To Find Entry
Dec 19, 2010Well I downloaded Catalyst 10.12 for linux. Was trying to build packages for Fedora 14. But was unable to find Fedora entry in it. Wonder why it is not there?Here is my X
[Code]...
How am I suppose to install catalyst if they don't have the packages ready yet ? I am not so installing RHEL6 packages in Laughlin cause of kernel conflict. Or is it that Catalyst still not compatible with Kernel 2.6.35.x ?
Fedora Hardware :: AMD Catalyst 11.6 Driver Released?
Jun 16, 2011I just wanted to let everyone know that the latest 11.6 Catalyst driver has been released.I would like everyone to know that I have successfully installed the ATI drivers in gnome, but lost the usability of gnome-shell and automatically dropped back to the basic Gnome desktop. But I still have a usable system.
View 1 Replies View RelatedFedora :: ATI Catalyst Changed Boot Screen?
Aug 9, 2011I installed the ATI Catalyst drivers for my laptop and I guess they are working since World of Warcraft and other graphic dependent programs are working, but the problem is my boot up screen is really ugly now. Instead of the Fedora drop filling up I get a bar at the bottom of the screen that fills up. This happens only after installing the Catalyst drivers how do I change it back to the drop? This is the only issue I'm having.
Fedora 15 x64 is my operating system.
Ubuntu Multimedia :: Catalyst X86_64 Driver For Radeon 4850 Install Failing?
May 2, 2011I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
Fedora Hardware :: ATI Catalyst Drivers Have Essentially Disabled Gui?
Sep 26, 2010I recently downloaded and installed the ATI Catalyst drivers for my ATI Radeon HD 4800... now it doesn't work at all. I Load Fedora and after the initial loading screen both of my monitors go blank. Does anyone have any suggestions on how I could get into the command prompt and install the fglrx driver, or whatever that proprietary one is called
View 2 Replies View RelatedFedora :: Updated To 15 - And Installed My Fglrx / Catalyst Ati Drivers ?
May 26, 2011Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies View Related
