Ubuntu :: ATI Catalyst - Unable To Get The System To Work With Fglrx?
Feb 22, 2011
So I was stupid and careless enough to buy system with ATI Radeon HD6850.I have Maverick installed (64 bit) and everything was fine yesterday, I did usual update and today I get text prompt.I tried everything I already learned and upgraded to Catalyst 11.2 too (built packages from downloader installer), but with no luck.I see that aticonfig is now recognizing my card, which is promissing, but I'm unable to get the system to work with fglrx anyway.
I've purged the fglrx and friends, removed /etc/X11/xorg.conf and now I'm running on vesa with lower resolution.But I'm quite pissed off for loosing my morning on fixing (or failing to fix) yet another problem with ATI.
Code:
$ uname -r
2.6.35-27-generic
$ less /var/log/apt/history.log[code]..............
View 7 Replies
ADVERTISEMENT
Aug 21, 2009
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
View 14 Replies
View Related
May 26, 2011
Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies
View Related
Jan 14, 2011
I'm running Debian Squeeze/current fine with the default kernel & ATi's Catalyset drivers. I'm struggling to get the display drivers to work with the bigmem kernel as I've got 4GB ram on my machine so might as well try to enable it.
I can have my system work with the normal Squeeze kernel by installing the normal kernel headers & then FGLRX drivers, but after additionally installing the bigmem kernel & headers (linux-image-2.6-686-bigmem & linux-headers-2.6-686-bigmem) I cannot get the system to reach X after removing & then re-installing the video drivers.
View 9 Replies
View Related
Jul 11, 2014
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
View 1 Replies
View Related
Mar 4, 2010
I have downloaded the drives for ATI Radeon X1300 Pro and they will not install. The Catylasy also does not work saying that ATI drivers are not installed. Does anyone know how to get this to work?
View 2 Replies
View Related
Jun 12, 2010
Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
View 7 Replies
View Related
Nov 19, 2010
Looking at the AMD/ATI download pages, I can't tell if catalyst control center (which installs the drivers) is fully functional for Ubuntu 10.10.
Has anyone had success with this software?
I have integrated ATI Radeon 3200 HD graphics on my motherboard and can't get things working.
View 5 Replies
View Related
Feb 19, 2010
I'm dabbling with Ubuntu, until I get my Gentoo setup going, but my issue applies to linux in general. I have just installed the Linux CCC 10.2 on Ubuntu, and I am noticing they still have not provided any method for controlling the fan speed of the video card (I'm running a XFX Radeon HD 4890). I have installed MSI Afterburner with wine; it successfully installed it, but it will not launch the actual utility. how to get MSI Afterburner to work, a Windows program that has fan control capabilities and runs well under Linux, or of any other way to rectify this issue? I have read a couple of posts on using lm-sensor to try and control my fan speed issue, but I have not figured this out either.
View 2 Replies
View Related
May 23, 2010
I just installed Kubuntu 10.04 and I am experiencing problems with the fglrx diplay driver.I installed it with Jocky and rebooted.Everything works fine. But everything is so un-smooth. Like dragging & resizing windows.It's not updating instantly.It was smooth before installing fglrx but then I couldn't boot without nomodeset.I am using a widescreen LCD monitor.My xorg.conf
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
[code]....
View 2 Replies
View Related
Oct 10, 2010
before I install fglrx 10.9 on a fresh install of Ubuntu, I was wondering which installation method works best, via ATI's website or the repositories?
View 2 Replies
View Related
Jan 5, 2011
Flgrx won't work w/switchable graphics using non-AMD chipset. I use core i5 with ati mobility radeon 5470 (so it doesn't have amd chipset). This is the X output when graphics mode in BIOS is set to switchable.
[22.909] X.Org X Server 1.9.0 Release Date: 2010-08-20
[22.909] X Protocol Version 11, Revision 0
[22.909] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[22.909] Current Operating System: Linux xmonki-laptop 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686
[22.909] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=ec81127a-4c19-4930-aff6-f2704d368f34 ro quiet splash
[22.909] Build Date: 16 September 2010 05:39:22PM .....
View 2 Replies
View Related
Dec 19, 2010
Well I downloaded Catalyst 10.12 for linux. Was trying to build packages for Fedora 14. But was unable to find Fedora entry in it. Wonder why it is not there?Here is my X
[Code]...
How am I suppose to install catalyst if they don't have the packages ready yet ? I am not so installing RHEL6 packages in Laughlin cause of kernel conflict. Or is it that Catalyst still not compatible with Kernel 2.6.35.x ?
View 1 Replies
View Related
Apr 24, 2011
So a few weeks ago, I was running Ubuntu/Windows7 Dual Boot, and I installed the proprietary FGLRX ATI graphics card driver. This rendered my Ubuntu system command-line only, and I had to install all over again. If I install FGLRX now, will this happen again or has the bug been fixed? If it does happen again, is there any way to revert to the open-source ATI driver from the command line?
View 9 Replies
View Related
May 2, 2010
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
View 1 Replies
View Related
Apr 20, 2011
I just upgraded to 11.4 from 11.3 and cannot seem to get the FGLRX modules to load. Every I try to load the module, I get the following error: fglrx: no symbol version for module_layoutI read through this howto with no avail: SDB:ATI drivers - openSUSE else run into this problem with upgrading?
View 2 Replies
View Related
May 2, 2011
When I first did the upgrade to Natty, no desktop at all would start. I could only get a text terminal login prompt. Log showed a segfault in fglrx module: "firegl_SetSuspendResumeState" I found instructions to remove the fglrx module and install the default ATI driver. Now I get a graphical login screen. But I must only login with "Ubuntu Classic (No effects)" in order to get a desktop. If I select Unity or Ubuntu Classic, I never get taskbars or menus and can't run any apps. So Natty Narwahl is a big step backwards for me. What is the relevant information to provide? The display driver is listed as RV710 [Radeon HD 4550] from ATI Technologies Inc.
View 3 Replies
View Related
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
Jul 23, 2015
I cannot get my X working with fglrx.
Additional info:
Code: Select all# cat /etc/X11/xorg.conf.d/20-fglrx.conf
Section "Device"
Identifier "Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]"
Driver "fglrx"
EndSection
[Code] ....
View 9 Replies
View Related
Sep 10, 2011
I have an iMac which is able to run openSUSE whith some manual adjustments. However, fglrx is a naughty piece of driver that keeps stalling my normal boot. I have tried many different things already, with and without xorg.conf, with and without aticonfig --initial, nomodeset (as always), reinstall, etc etc but I can't figure it out.I am able to boot to runlevel 3, but init 5 gives me 2 black screens (Mac still responsive)
- iMac 27"
- Beamer connected
- using EFI/Elilo
[code]....
View 8 Replies
View Related
Jan 30, 2010
I can't run multiple x servers My first X server starts gdm->gnome fine. Then I go to run
$startx -- :2 and get an error, posted at the bottom. If anyone else has fglrx and can use multiple X servers, please leave a message with:
-your distro
-x86/x64
-xorg version
-fglrx version
-anything else that might be important
My system specs are:
Debian squeeze (testing) x64
All packages done through aptitude, with exception of linux-source and fglrx-source
Radeon 4870 1Gig
All packages as up to date as possible Have always had this error, with at least last 4 fglrx versions
$startx -- :2 (as root)
Code:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
[code]....
View 3 Replies
View Related
Jul 11, 2011
Is it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
View 3 Replies
View Related
Sep 14, 2010
I am running Suse 11.3 with two monitors and two video controllers -- an ATI controller on the motherboard and a separate PCI ATI board. After some startup problems, I got the onboard video working properly with the "nomodeset" command on boot, but the other display is blank. Thinking it might be the driver, I downloaded the fglrx driver (via YAST2). But now when the system boots it never opens X windows. I looked at the Xorg.0.log file and I'm getting a bunch of WW errors and then a seg fault.
The file /usr/share/doc/packages/fglrx/installer.html says I can uninstall the driver using the fglrx-uninstall.sh script, but I can't find such a script. How do I disable (uninstall, remove, get rid of) the fglrx driver and get back to where I was? I'm dead in the water if I can't get X going.
View 5 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Aug 13, 2010
I recently upgraded to Lucid (x86_64) on an HP dv2 laptop, and after doing so, the system will not resume after a suspend (with fglrx installed from the "official" repositories). After reading a lot about the problem, I have seen that updating to the latest ATI driver had fixed this issue for some, so I would like to try that.
I am following the guide at at cchtml.
First, I tried installing the Ubuntu-X team's drivers. However, after (successfully) adding their repository, an update does not fetch their packages:
Code:
It looks like both the xorg-edgers and ubuntu-x-swat repositories are being ignored? (If I'm reading that correctly.) If I open the window System->Administration->Software Sources, I can see that the ubuntu-x-swat repository is checked, so I'm confused why it's being ignored.
If I try to demand the fglrx-installer package, I get an error that it cannot find this package.
Code:
I have the same issues for xorg-edgers and ubuntu-x-swat.
Finally, if I try to build the official ATI v10.7 drivers myself, I get an error that Linux is an unrecognized architecture!
Code:
I have installed all preliminary packages suggested in the guide:
Code:
I really can't understand why I'm unable to build the package from ATI myself.
View 3 Replies
View Related
Oct 31, 2010
I am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
View 13 Replies
View Related
May 17, 2009
I have a laptop with ATI mobility 2400, and ralink wireless, I have not very experience with linux, I have tried many live-cds, ubuntu, opensuse, gentoo, fedora and all crash if I don't boot with the aditional option "clocksource=jiffies", i'm thinking of trying fedora 11 x64 but my main concern is about my ATI mobility VGA, in windows i need to install modded driver as original catalyst are not compatible with my system.
View 3 Replies
View Related
Aug 4, 2011
I've been using Fedora 15 LXDE for a few weeks (its been great), and decided to install the ati proprietary drivers (I used the tutorial in one of the general strickies). As soon as I rebooted, I now get the following message:
Code:
Started SYSV: Late init script for live image... ATI external events daemon. into universal adresses I can type stuff using the cursor, but it doesn't do anything. I've tried adding 'runlevel 3' to the boot options in Grub to try and prevent fglrx conflicting with Xorg but it doesn't seem to work, unless I'm doing something wrong.
View 1 Replies
View Related
Aug 18, 2015
My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...
If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...
Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...
I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...
Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...
This issue also only appears with the fglrx driver, open-source works well.
View 0 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
