Fedora :: Cannot Install Anjuta By Yum?
Dec 21, 2009When I tried to install anjuta, then yum showed below error message.
Cannot find a valid baseurl for repo: fedora
My yum's repolist is as below.
ADVERTISEMENT
Debian Installation :: Anjuta Install - Libsvn1 Not Authenticated
Jul 2, 2015I wish to try the Anjuta IDE - I am running wheezy. Using Synaptic, libsvn1 is marked for installation, but produces a warning message that it is not authenticated.
I have seen other posts regarding this issue and would not want to be left with a broken system! I have also tried installing libsvn1 on its own and get the same message.
Fedora :: Anjuta Cannot Create GNOME 2 Projects
Apr 10, 2010I've been wanting to write a small program for personal purposes in GNOME using Anjuta. I've noticed something strange when I start a new project. I have various options, a GTK project, SDL, XLIB, and GNOME Applet, but no GNOME project? I have the GNOME development libraries installed as far as I know, but the option to create a GNOME 2 project just doesn't appear.
View 2 Replies View RelatedUbuntu :: 10.04 - Install The Extras Of Anjuta 2.3.2 But The Current Version Supported From Synaptic Packet Manager Is Only 2.3.0?
Oct 5, 2010i am trying to install the extras of anjuta which are v.2.3.2 but the current version supported from synaptic packet manager is only 2.3.0.. what can i do ? Is there a repository that has anjuta 2.3.2 for ubuntu ? Or anywhere i can find the extras for 2.3.0? if yes then give me the complete link to add to sources.
View 1 Replies View RelatedUbuntu :: Installing Anjuta 3.0.tar.bz2?
Jun 14, 2011can somebody tell me how to do so? i followed tuts everywhere , but at the last configure step it says that it doenst find a GTK higher than 2.2
View 1 Replies View RelatedSoftware :: Anjuta IDE Not Installing On SL6?
Jun 28, 2011I downloaded the el6 version of Anjuta from [URL]
I am trying to install it using yum, but I keep getting dependency errors. How do I satisfy these dependencies on Scientific Linux 6?
Below is the error, and my active repolist.
Code:
Finished Dependency Resolution
Error: Package: 1:anjuta-2.28.1.0-2.el6.i386 (/anjuta-2.28.1.0-2.el6.i386)
Requires: autogen
Error: Package: 1:anjuta-2.28.1.0-2.el6.i386 (/anjuta-2.28.1.0-2.el6.i386)
Requires: libgda-sqlite >= 3.99.7
[Code].....
Ubuntu Installation :: Anjuta 3.0.0 & GTK+ 3 As Well As All The Required Packages Be Able To Run?
Sep 1, 2011i have been working with fedora for a long time because i was unable to get anjuta 3 working on ubuntu as well as GTK+ 3,facing a huge list of problems after reinstalling it around 3 times and unable to get my new mouse working on GNOME. My question is will anjuta 3.,GTK+ 3.0 as well as all the required packages be able to run/installed on ubuntu?
View 2 Replies View RelatedUbuntu :: Enable Uml Diagram Painter On Anjuta?
Aug 19, 2011How do I can enable the uml diagram painter on anjuta on ubuntu 11.04? I see some screenshot but I don't found the package.
View 1 Replies View RelatedProgramming :: Anjuta And Geany: Build Menu Is Grayed Out?
Mar 25, 2010I am new to using Linux (Debian) and I wanted to install an IDE that covers all languages (C++, Java, SQL) so I decided to try Anjuta, but when I entered a simple "Hello World" code and tried to run it, I noticed that the Build > Compile selection was grayed out. I read on another forum that Anjuta can only compile projects so I switched to Geany, same problem. Do I have to install a compiler?
View 1 Replies View RelatedGeneral :: Required In Installing Anjuta & Pango In CYGWIN?
Oct 13, 2010I am very new to Linux. I want to work on GTK. As I came from VB background, I want to use Anjuta IDE to start my design. I installed CYGWIN. When I am trying to install anjuta , I am getting error saying GLIB and Unique1.0 not found :
[Code]...
Software :: Replace Glib - Build GTK3.0 For Anjuta 3.0?
May 14, 2011I've gone about as far as I can with this without trashing my system. I'm running Mint 10 LXDE with XFCE.
Ultimate objective: Install latest Anjuta 3.0 from source (not yet in repos). Anjuta ./configure reported a need for updated packages, such as GTK 3.0, Glib, Gio, etc. I downloaded GTK 3.0 and 'config' reported a need for an updated Glib. So I downloaded that and have installed it successfully (no prefixes; from home dir.)
But now GTK config is stating that it has found two versions of Glib, which I guess makes sense since I made no attempt to replace the old one. So, what is/was the proper way to replace the old Glib so there is only one version, or, is that a bad idea? Will some software still be dependent on the old Glib, or do the devs make the libraries backward compatible? Where do I go from here?
[Code]...
Programming :: Connecting Signals In Anjuta / Gtkmm - Errors During Compilation
May 24, 2010i got this simple example of a code, its basicly Anjuta Gtkmm empty project. [URL] and trying to connect button signal to a function at line 67, however i receive errors during compilation, and i dont know what's wrong error output [URL]
View 1 Replies View RelatedFedora Installation :: Install Fedora 12 I386 Using CD#1 For A Minimal Install?
Dec 19, 2009I'm trying to install Fedora 12 i386 using CD#1 for a minimal install. For that during installation I selected only Base. For some reason when I started installation it was trying to install 432 packages (Base has got about 80 or so packages). i can understand there might be some dependencies, but really that much? I kept going with the installation of 432 packages, but it finally failed on gtk2-immodule-xim-2.18.3-19.fc12.i686.rpm.I need just minimal install, so I can install LXDE later on by myself.
View 11 Replies View RelatedFedora Installation :: F11 - Graphical Install Fails - Text Install Has No Fdisk
Jun 28, 2009I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
Fedora :: Install The Printer With CUPS And Not With Samsung Unified Install Software?
Feb 19, 2011I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
Fedora :: Install Ndiswrapper In Order To Install A Windows Wireless Driver
Apr 1, 2011I am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
Software :: Fedora Install Doesnt Creat User Accounts At Install
Jan 16, 2010I installed fedora 12 Constantine and the install gets to the point of rebooting once it's done with the reboot it goes right in to the login without creating a root account or a user account.How can I solve this issue, there has to be like 3 or 4 solutions to this problem I'm just new to linux.
View 3 Replies View RelatedFedora Installation :: Transfer Install Image To USB Drive, Then Install?
Dec 10, 2009I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies View RelatedFedora :: Run A Install From The Command Line In Virt-install?
Mar 8, 2010below is what happens when i try to run a install from the command line in virt-install. keep in mind that this is a fresh fedora12 install selinux is disabled logged in as root. i have never had so many problems with something and it is maddening for there to be a thousand freaking how-to's on the subject all acting like it is so freaking simple.
[Code]...
Fedora :: How To Install Software - Install Popup Didn't Come Up ?
Jan 10, 2011I now have Fedora 14 64bit up and running.
I need a bit of clarification. I've been using Debian based OSes. I just want to make sure that I understand how to install software using Fedora.
While I had the Live DVD desktop running I downloaded the Google Chrome .rpm pack to the download file, right clicked on the .rpm and opened with the archive manager. The archive manager came up and showed me a file folder, the a popup came up on it's own and ask if I wanted to install, clicked yes and every thing from there worked, Chrome was installed and worked. When I tryied to download the plugin for Google and do the same as before, the install popup didn't come up. This is the part where I made a mistake, I went to the download folder and double clicked on the .rpm and the install popup came up, and I installed. This some how messed up the Live desktop to the point that I had to reboot, shut down didn't even work right.
I should have opened the folder the archive manager placed the .rpm and then double clicked on the .rpm to install instead of within the dowload folder.
I aslo read up on how to use rpm -i filename From the terminal can I Or does the .rpm package have to be in the correct folder before installing?
Also from the live dvd I tried using sudo rpm -i , but got a warning and said I would be reported.
Fedora :: Need To Install Repository Each Time Install Any Package?
Jun 10, 2011what is repository's ? do we need to install repository each time we install any package ?or cant we just say yum install package name ? & how to install tar.gz files ?
View 2 Replies View RelatedInstallation :: Can I Install Oracle 10g On Fedora From Cd I Used To Install In Xp
Nov 18, 2009Can i install oracle 10g in fedora using the cd i used to install in xp...
View 2 Replies View RelatedFedora Installation :: Can Install KDE Version With Install DVD?
Mar 3, 2010I noticed that for the live cds there was one for GNOME and one for KDE but hte install dvd didnt have an option for one or the other
View 1 Replies View RelatedFedora :: KVM Cannot Install On HP DL785 G6, But Will Install On Other Systems?
Oct 22, 2010This works on an HP DL365 G5, but fails on the DL785 G6Does not even start the install, and I don't get a lot of debug information, so I can't tell what's happening.
$ sudo virt-install
> --vnc
> --arch=i686
[code]....
Fedora X86/64bit :: Dell N5010 - Unable To Install Fedora On Unallocated Space
Sep 13, 2010My laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies View RelatedFedora Hardware :: Parallel Printer CUPS Fedora 15 HP Doesn't Install Driver
Jun 3, 2011This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies View RelatedFedora Installation :: Noobie> Fedora Server > Wanna Install Kde Or Gnome?
Sep 23, 2009i am justin i'm 17 years old and new with linux, i use ubuntu and linux mint 7 and a friends of my has a dedicated fedora server. he asked me to intall a desktop manager ( or something that is the same, dont know how to call it ) so he could use remote desktop to acces his server
i have connected the server trought ssh and i am in the terminal. Now i want to install kde or gnome so i and my friend could use the server as a mail en WWW bla bla bla server. and my question is how i need to do that i tryd : yum groupinstall "KDE (K Desktop Environment)" and yum groupinstall "X Window System" but none works i have seen those commands on this forum so i tryd it.
Fedora Installation :: How To Install Fedora 11 On External USB Drive With Anti-virus?
Sep 28, 2009I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
Fedora :: Fedora/GNOME Didn't Install With Add/Remove Programs Feature?
Feb 20, 2010Recently installed F12 through the text based install and have got to GNOME gui but when i got to system/administration i only get two options and those are for display changes. Is there some way to install the features i missed out on? namely Add/remove programs which i can't seem to find anywhere
View 3 Replies View RelatedFedora Installation :: Install The Original Version Of Fedora 15 And Make It Dual Boot With Windows 7?
Aug 17, 2011So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg