I am very new to Linux. I want to work on GTK. As I came from VB background, I want to use Anjuta IDE to start my design. I installed CYGWIN. When I am trying to install anjuta , I am getting error saying GLIB and Unique1.0 not found :
[Code]...
i have been working with fedora for a long time because i was unable to get anjuta 3 working on ubuntu as well as GTK+ 3,facing a huge list of problems after reinstalling it around 3 times and unable to get my new mouse working on GNOME. My question is will anjuta 3.,GTK+ 3.0 as well as all the required packages be able to run/installed on ubuntu?
View 2 Replies View RelatedI want to install these libraries in cygwin, how do I do it? are all of them available on cygwin environment or only on linux?
g++ - the version 4.4
graphviz
gnuplot
plotdrop
[Code].....
can somebody tell me how to do so? i followed tuts everywhere , but at the last configure step it says that it doenst find a GTK higher than 2.2
View 1 Replies View RelatedI downloaded the el6 version of Anjuta from [URL]
I am trying to install it using yum, but I keep getting dependency errors. How do I satisfy these dependencies on Scientific Linux 6?
Below is the error, and my active repolist.
Code:
Finished Dependency Resolution
Error: Package: 1:anjuta-2.28.1.0-2.el6.i386 (/anjuta-2.28.1.0-2.el6.i386)
Requires: autogen
Error: Package: 1:anjuta-2.28.1.0-2.el6.i386 (/anjuta-2.28.1.0-2.el6.i386)
Requires: libgda-sqlite >= 3.99.7
[Code].....
I have a program that is completed under Linux, it requires library tidy, PCRE and libcurl, which could be found in Cygwin too.
I could compile my linux program through Cygwin and produce an EXE file, however it do require 'cygwin.dll' installed by the users.
I am wondering if I could have someway to produce out a stand-alone EXE file that could run independently from Cygwin ? ( I don't mind to combine that cygwin.dll and the EXE together for a larger EXE file).
I have Ubuntu 9.10 installed on my laptop.And I am going to install mediaplayer from its "*.deb" file, But it requires a lot of other packages and each of those packages needs others and so on.Since I do not have internet connection on my Ubuntu and my internet connection is in Win XP, so I should download these packages and then check them in my Ubuntu and see what other packages it needs and download them and so on.
It is a very time consuming task. If I could find out what are all the required packages I could download all of them at once and then I could install them by "sudo dpkg -i *".Therefore I am wondering if there is a way to know which packages are the required ones for a typical package, my work would be much more easier.
I just want to know. How to run Microsoft office in Linux? Do I need wine? Can you tell me the process- step by step to achieve this?
View 7 Replies View RelatedI have tried all the ways possible by changing settings in BIOS, changed the ROM, even the hard disk but nothing worked to install red hat 5 in my system. I tried to install in my laptop and it was done but not in my desktop. I m using HP dc7900 convertible minitower.
View 8 Replies View RelatedWhat is the kernel version required for installing NFS4 (RHEL) ??
View 1 Replies View RelatedI am trying to install google chrome on my computer, it is in a .deb package and I am using dreamlinux. Earlier today I installed a .cbr/.cbz file reader from root, that was also a .deb and it worked just fine. now I go to install google chrome and it says (Blue is my command, and red is the system response):
I checked under my USER GROUPS and Root is still set as root, and I haven't been using it unless I need to install with it to other directories, Should I be using another command to install? or is it a problem that may affect other aspects of my system? ... My biggest concern is not getting google in, I can wait for that ... I just wanna know why ROOT is under the impression it's not a superuser.
I am trying to install gnome-mplayer to see if I update it, for he not catching more when I play the videos, and it is asking me to have at least one "backend "to compile Pango. I do not understand this output. Have you tried installing the source Cairo.ttf but solves nothing. Cairo is installed as described but do not understand this output.
weiller@debian:~/Downloads/pango-1.36.5$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
[code]...
I am using CentOS release 5.2 (Final). Now the problem is the yum is not installing the pkg I required.
I am facing the following error.
The program package-cleanup is found in the yum-utils package.
As one of our friends told, I have downloaded and installed the CYGWIN on my winows xp pc, to learn and practice linux commands.when the icon of it is double clicked, its screen as appearing as below:
System1@system ~
$
MY DOUBT IS :
I could make a directory with command like mkdir. But after that it is not allowing commands like touch, vi, vim etc.How i have to write data or a file in it. Still anything to do after installing CYGWIN.
I am using cygwinI am getting these errors when i compile sim_routing.cc program by this command../../bin/cxx sim_routing.ccg++ -Wall -o sim_routing sim_routing.cxxfollowing errors comes../../common/priority_q.h : In member function 'bool guardedQueue<ITEM>::Validate(Const char*);error : there are no argument to 'strcat' that depend on template parameter so a declaration of 'strcat' must be avaible.error : <if you use -fpermissive g++ will accept your code but allowing use of undeclared name is deprecated>error : there are no argument to strcat that depends on template parameter,so declaration to strcat must be avaible
View 1 Replies View RelatedI can't copy and paste into Cygwin... is there a good alternative to Cygwin that will let me do this?
View 7 Replies View RelatedI want to use the command more to see the content of a text file; however, the command is not available. I wonder whether all linux commands exist in cygwin. I am running cygwin on windows xp.
View 4 Replies View RelatedNew to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
Error: Not ELF
make[2]:*** [scripts/mod/elfconfig.h] Error 1
make[1]:*** [scripts/mod] Error 2
make:***[scripts] Error 2
Every time I try to compile it from the main directory of the source, which I hope is what I'm supposed to do, I always get this.
I installed the CUnit framework which is a .tar.gz file from the bash shell in cygwin.
make gives me an error saying:
make install works
make clean works
I am not able to compile but install works I do not know if it is installed and as to where it is installed
when i checked it gives me a list of header files and also the lib files. I do not know as to why the make command is not working in cygwin. When i go to the bin directory it shows the make command.
I'm installing GLIBC 2.7 (required by some 3rd party software) on a RHEL 4 system as root and am getting the following error during the make:
gcc ../sysdeps/x86_64/mempcpy.S -c -I../include -I/tmp/gnu/ob27/string -I/tmp/gnu/ob27 -I../sysdeps/x86_64/elf -I../nptl/sysdeps/unix/sysv/linux/x86_64 -I../sysdeps/unix/sysv/linux/x86_64 -I../sysdeps/unix/sysv/linux/wordsize-64 -
[code]....
I have the binaries: perl-5.10.1-3.tar.bz2 and I don't have access (admin privileges) to run setup.exe for cygwin, my question is how can I install manually inside cygwin the module for perl: perl-5.10.1-3.tar.bz2?(or maybe can I get the sources and compile? can someone tell me please how?)
View 1 Replies View Relatedould recommend for a console hex editor under windows/cygwin/linux?
But I just downloaded cygwin to my xp machine. Tried my first experimental script and created it one level directly below where cygwin put me by default. The script, named show two says:
#!/bin/bash
echo $1
echo $2
But bash apparently can't find it. The name of the script is showtwo, but I also tried naming it showtwo.sh; no dice.
I'm interested in modding an open-source turn based game called Advanced Strategic Command or ASC, but to do that I need bunch of libraries. Installing those libraries is very easy in linux, I know but the thing is I'm working with windows in which the building of the libraries is a bit more complex, as you probably know. One of those libraries is the ligsigc++, I'm using VC++ but haven't been successful in building the libsigc++ in VC++. I considered making my life easier with Cygwin (a unix shell for windows) and simply executing ./Configure, Make. I's worked like a charm and the library dll it produced is named cygsigc-2.0-0.dll which made me wonder is compiling a library in cygwin to be linked with VC++ perfectly ok? That is is there any difference in compiling in cygwin and VC++?
View 2 Replies View RelatedI have installed cygwin to my windows xp machine. I typed the commmand in cygwin shell it shows "command not found". How can i install make command in cygwin
View 2 Replies View RelatedBased on previous forum discussions, I tried to install cygwin with 'make' installed from develop during installation. I can even see 'make.exe' in bin folder, but still while running the make command, it still shows error.
I was confused in one other part. Should I put the bin folder in some specific location or just wherever it is placed during cygwin installation? I was running VIC model, do I need to place the bin folder inside VIC source code folder.
I recently installed Cygwin on my windows vista to practice on Linuxunix commands.I am unable to do a simple task of declaring variables on the command prompt I am trying:
$ vech=Bus
$ echo $vech
bash: vech : command not found
What am I missing? Do i need to add something to .bashrc? Also, I remember right click on the shell command gives the ability to copy or paste text from the shell. I am using Bash, how do I copy n paste text on shell window?
I'm hoping that someone can help me, I need to remove spaces (not replace with underscores) from several thousand files on a system with cygwin.
Can I do this from the shell using rename or mv somehow?
I am running programs remotely but they are terribly slow. I'm on a windows machine which may be my first problem. I have killer ping and download speed so they should run fine. What can I do to resolve this.
View 2 Replies View RelatedI installed cygwin with rsync on a Win XP Machine. My goal is to backup a folder from one hard drive to another (both on XP machine).
I run the following command from a batch file:
Works fine except the --delete flag is not working. Copies everything in source to destination, but doesn't delete some extra files that are present on the destination, but aren't on the source, which it's supposed to. I looked at the rsync man page, and I'm doing everything right... such as not using wildcard.
The same command works perfect on another computer (XP machine; source and dest both on XP machine).