Fedora :: Cannot Fully Access Repositories Behind Proxy ?
Jul 2, 2010
I have a problem accessing repositories behind my proxy. Another problem, I have no access for that installation right now, but I do remember what I did.
First, this is fresh install Fedora 13 with KDE. I manually added IP, subnet mask, DNS, to network manager. Then, manually added proxy settings to SystemSettings/ NetworkSettings/ Proxy. After that,
Also, in /etc/yum.repos.d/fedora.repos and i686.repos (I mean, Core repositories and Standard one) I commented out "fedora" address line, and uncommented "mirror".
Now I can, for example, yum install wine, but yum install unrar fails totally (not found), and yum install mc (midnight commander) shows error, where I can copy address or rpm, and make localinstall then.
View 3 Replies
ADVERTISEMENT
Feb 12, 2010
I just did a clean install of Fedora 12 on a system running Fedora 11.
I'm behind a proxy, and I followed the steps outlined at [url] to fix the initial repository error.
This is what I get now:
Code:
My /etc/hosts.conf looks like this
Code:
Also,
Code:
View 9 Replies
View Related
Jul 17, 2011
I've tried to install FEdora 15 using the Fedora 15 DVD for i686 architecture. However, after the step where I chose the setup for GRUB boot options, I got this error: "Some of your repositories require network access but networking could not be setup" (or something similar). Then I only had the option to exit the installer, but after reboot there was no GRUB and I have no means even to boot back to Windows.
How to install Fedora without networking or is Fedora the only distro so messed up that this can't be done? I've tried the Live CD/USB version but that version has no C compiler to allow me to install networking drivers after install completes. Now I was told to try the full DVD, by the full DVD managed to mess up my computer completely.
View 10 Replies
View Related
Jul 11, 2011
I work behind an ISA proxy. I have to authenticat with domainuser. When defining proxy settings with yast, I cannot put "domainuser" in the URL, so I add it in text mode in /etc/sysconfig/proxy for all protocols. Example: [URL] Then I have to logout/login in order yast to work.
BUT:
- I cannot add communauty repositories.
- zypper fails
In order to make zypper and adding repositories to work, I have to suppress one of the two back-slash like:
[Code]..
View 1 Replies
View Related
Feb 28, 2011
I have Fedora running on the comp which is sitting behind proxy, which required username and password to access internet. The username is E-mail address.
I've tried the following to configure internet access:
My question is how can I configure internet access through proxy system wide for all applications and commands?
View 8 Replies
View Related
Sep 11, 2010
On Package repositories - openSUSE quite a few useful repositories are listed, however, only for SuSE 11.1 and upwards. Is there a way to access the same repositories for 11.0? (E.g. Contrib, KDE:KDE3 etc.) I remember that in Ubuntu the repositories for outdated versions had been simply moved to a slower server but I could use them just the same even when my version was a few years old. It would be good to have this for OpenSuSE as well. (Especially that the version I'm working on is on my machine at work, so I cannot just upgrade it.)
View 4 Replies
View Related
Jul 1, 2011
I just downloaded and installed netinst version debian 6.0.2.1. I've had ubuntu before, and several usb live versions...but I really wanted to learn how linux works, and it was suggested I get debian. I've been unable to get anything accomplished, other than the basic install. Can't get gnome, or xwindows. Seems to me like I need more repositories. Need a Desktop! But mostly, I guess, I need a browser so I can hook up to here!
My computer is:
Dell Latitude 2100
2gb ram
Broadcom BCM4312
I tried to get Xterm. Went su, then apt-get install xterm...it's able to 'read' everything, but then no matter *what* I try to install, I get this same answer : E: Unable to locate package xterm
So I research, and it seems like I'm lacking in repositories. Here's my sources.list. I made a backup. I'm having to *type* everything in, on this computer, until I can get a browser working on the linux machine. So if there are typos I have ethernet cable hookup. I know from past experience sometimes this broadcom wireless card can be a problem. For now, I just want *anything* to work, and get some kind of hookup, so I can finish installing. I've reinstalled 3 times, with iso...
Here's my sources.list. Until I hear from one of you'all, I'm gonna look for a better one, and then vi edit it in here...
View 14 Replies
View Related
Jul 25, 2010
I downloaded Ubuntu last year and was mightily impressed. I'm not really a techy kinda person, but ubuntu was pretty straightforward to install and set up the packages and stuff like soulseek. however since then i moved to thailand and now I live in Myanmar and Thailand...my problem is that although the internet still works, everything else like updates, Synaptic, IRC, Soulseek don't work anymore...i've lived with it for 6 months, but now it's becoming a problem because i would like to download some more software...is there a simple solution to this or does ubuntu simply not cover these areas?
View 7 Replies
View Related
Mar 26, 2011
I have a Dell Mini running 10.10 dual booted. Accessing internet through a BT Home HUB version 2.problem solved by making the Wireless setting 802.11 B/G, instead of the BT default), now I can not access software repositories. when I try through synaptic to load Icedtea, or Google chrome for example, I get server not found 404. I was previously able to get software.
View 4 Replies
View Related
Jul 15, 2011
Trying to use Yast2, and it gives errors: " can't access installation media [url] " and this is with all the repositories that used to work fine. Not sure what it could be? I tried to use a mirror, and I got the same results.
Does Yast2 use a port other than port 80 to connect to the repositories? I have not updated the firewall since using Yast last. Have the repository servers been updated since the release of 11.3, to make some editing of the repositories in Yast necessary?
View 9 Replies
View Related
Jul 7, 2010
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies
View Related
Feb 18, 2011
I cannot update my SLED 11 because I have the next error message about a half of my software sources:
I checked if software repository is correct - yes, it is. For example (just one of many):
The message is the next:
View 4 Replies
View Related
Sep 1, 2009
I am working on fc10. I connect to internet using two connections: with proxy and without proxy. Initially I had some problem in configuring yum for proxy and I resolved it by creating files proxy.sh and proxy.csh in /etc/profile.d with the required details (export_proxy).Now when I connect to my connection without proxy I have some problems .Whenever I try to do yum update I get the following error:
"[URL]: [Errno 12] Timeout: <urlopen error timed out> Trying other mirror. Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try." what changes do I need to make in order to use yum in the connection without proxy?
View 3 Replies
View Related
Feb 9, 2011
I am running Suse 11.1 64bit, with KDE, recently I received a pop up on my screen, "something about update problems", I used Yast 2 and selected online Update and it couldn't find updates for Nvidia and froze at that point. I dis-enabled that repository and refreshed all of the remaining Repositories individually and it seemed to work. I then went to the repositories listing and selected "Add" and selected "community" repositories and received the following: WARNING Unable to download list of repositories or no repositories defined. What is my problem? How do I acquire the list of community repositories? I can live with out the Nvidia repository for now but would eventually like to get it back.
View 2 Replies
View Related
Oct 18, 2010
I try several free proxy websites but still i can't tweet.
Pic will explain everything.
Screenshot.png
Also i read about tor from [url]
Does anyone successfully tweet with tor installed?
View 4 Replies
View Related
Sep 3, 2010
I have a Dell box that got a fresh install of Fedora 13, along with XFCE during the initial installation, and it works just fine from a local monitor/keyboard/mouse setup.Now, in wanting to setup VNC to allow a remote XFCE desktop, it's not quite starting up properly:
The result is that I'm able to connect to the VNC session from another computer, but all I see is my XFCE desktop pattern image, and the XFCE mouse cursor (not in a spinning 'wait' state; I know it's the XFCE mouse, since my VNC client has a simple dot cursor that gets overlaid over the XFCE cursor, and I can move the mouse around the screen and the cursor follows); no menu bar, no tool bar, no desktop icons.I've tried changing the last line of my xstartup file to "startxfce4 &", and "startx &" with the same result.Is there a log file I can look at that would tell why XFCE is not fully starting up?
View 2 Replies
View Related
May 26, 2010
On 8.04 when I connect to the internet for work, it normally asks me for proxy authentication. When I type in the correct credentials, it allows me access to the web. For some reason, when I use 10.04 to access the web via firefox or chromium, I do not get the proxy authentication dialog box, so I cannot access the web.
View 2 Replies
View Related
Jan 16, 2010
If you leave your hotmail account signed in on a proxy server, can others access that account by just typing in [url] in their browsers? ie does the proxy server share all connections to the same site with logins?
View 1 Replies
View Related
Feb 24, 2011
i am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies
View Related
May 19, 2010
i just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies
View Related
Apr 28, 2010
Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies
View Related
Feb 1, 2010
My company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies
View Related
Jan 9, 2010
I just installed ubuntu because the newer versions were not working for me. So I installed 7.10 and there is no repositories that are still up. Is there any repositories that I could add from the newer ones or other distro repositories.
View 8 Replies
View Related
Sep 11, 2009
I'm running a Dell D630 laptop that uses the onboard intel i915 chipset for both audio and video. This is in a docking station that's connected up to a larger monitor. The laptop boots just fine as it has been for quite a while now. I get to the login prompt, enter my credentials and then after pressing enter and it looks like it's going to load my profile, the wallpaper updates but then the screen goes black for a moment and I'm then brought back to the login prompt again. The system is up on the network so I was able to ssh into it and capture the following from the logs during a login attempt.
Sep 11 08:03:27 jdesilets kernel: [drm:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
Sep 11 08:03:27 jdesilets kernel: ------------[ cut here ]------------
[code]...
View 10 Replies
View Related
Oct 20, 2009
I downloaded and installed a new copy of Fedora 11 last week onto a new computer (hereafter "proximate"). I also have a remote computer without a monitor running an outdated version of Red Hat Linux (hereafter "remote"). To manage the processes on remote graphically, I ssh from proximate into remote; this connection succeeds without incident in transmitting text (including commands) between the two computers; however, the command "gnome-session" returns: (gnome-session:15789): Gtk-WARNING **: cannot open display:
(The numbers apparently represent the process identifier and vary from instance to instance.) A similar warning (and no accompanying graphics) occurs whenever I attempt to start any graphical user interface from remote via ssh from proximate. The issue almost certainly lies with proximate; remote successfully communicated graphics to the ancient box that proximate replaces.
Interestingly, I cannot communicate via ssh from remote to proximate (within a secure shell from proximate to remote). If I execute /usr/sbin/sshd on proximate as root, then I can login, but even then I cannot execute any commands.
Consider the following output:
If I execute ssh -vvv proximate from remote to proximate, then I get a lengthy output that ultimately ends with "debug1: Exit status 254."
What must I do to communicate both text and graphics among my computers?
View 3 Replies
View Related
Mar 2, 2010
I am getting no sound output on Fedora 12 (fully updated). If I switch to Windows Vista (which is also installed on the same machine), everything is fine. So, I guess I will have to configure sound from somewhere. Where should I start?
View 2 Replies
View Related
Jan 29, 2011
When I load a fresh install of Fedora 14 on my system that the desktop doesn't load completely? It goes as far as giving me the desktop with a background, the icons and status bar do not appear. I am able to right click and open a konsle terminal but only when I am in KDE (failsafe)
What is weird is initially I had no problem. But when I switched to a different monitor the desktop would not load correctly. I have reinstalled the OS since then and still have the same issue.
View 4 Replies
View Related
Apr 28, 2010
Ubuntu lts server distro using on remote machine. i have remote site where internet access given via squid proxy. so when we enter in browser it start working internet fine. but on command line(bash shell prompt terminal) like wget,ping,nslookup,traceroute etc these commands does not work.
View 3 Replies
View Related
Mar 3, 2010
i am after proxy server, i add the proxy server access username and password
[Code]....
it said the export is succecefully done, but after trying to install something using yum, its give me this [root@locVirtual-linuxtest etc]# yum install samba
[Code].....
View 2 Replies
View Related
Aug 30, 2010
My company web access is behind proxy(http://abc.proxy). Network admin can get to check who is top10 user and web they access. I owned a centos server. I have a thought that create an encrypted tunnel within proxy so the admin cant detect my http address. This is how it going to works
client with OpenVPN -> OpenVPN server(centos with company proxy)-> proxy -> internet
My connectivity in my client are using OpenVPN server as bridge. Hence, no record for client is recorded in my Network admin monitoring list. OpenVPN server's activity can be traced by network monitoring tools, just assume that our ultimate goal is to hide client activity.
View 2 Replies
View Related
