Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 RepliesI am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..
i am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies View Relatedi just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies View RelatedMy company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies View RelatedI have Fedora Core 13 running. I have successfully (I think) installed squid, although I may have it configured incorrectly. I can ssh into the box from work via putty, but I can't use the proxy. I get a message "the connection to the server was reset while the page was loading" I can use the proxy from my home network, and have watched the tcpdump for port 3128 while using the proxy. I have turned off iptables completely (I'm not sure yet how to just allow squid)...
View 3 Replies View Relatedi have squid 2.6 server running on rhel5. by default teamviewer access is deny. i want to allow access of teamviewer but not getting.
View 4 Replies View RelatedI'm using squid version 2.7. The problem is when access.log is writing in new file for a new day, the access.log is written under "root" id, not "proxy" id. It caused the squid services not be running. I have to "chown" access.log to become "squid" id in order to run squid services. What I saw here is new access.log is written by "root".
View 2 Replies View RelatedI have configured a normal squid & now I want to manage internet bandwidth thru. "squid" proxy only.
Squid proxy server ip is :- 192.168.17.30
Client PC ip addres is 192.168.17.25
Total bandwidth avaialable :- 2 Mbps
Now, I want to limit bandwith of 400 kbps for the ip address 192.168.17.25 pc only. So, is there any method available for bandwidth limiting for a single pc?
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies View RelatedI my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
I am using Redhat 5.3 , I configured well access list using IP address, but my customer want to access list on MAC address basis.
View 2 Replies View Relatedi have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.
The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.
I've a SQUID proxy server installed in SUSE 9.0 ES server. I've created cache dirs on seperate partitions for better caching. Its working fine. But since last 15-20 days, i've experienced very slow net access to clients. I've gone through the /var/log/messeges file, it generates a two line error messeges
client read request fd602 invalid request
parse http request: unsupported method;HET
This messege increases as the number of clients increates (for internet access). The apperance of error messege lowering down as soon as the number of clients reduces.
As the count of clients increases error messeges increases, internet access getting slower and slower.
Slow access to web site using squid and Internet explorer.I am trying to troubleshoot an issue I am stuck on. We have a website that is loading .htm documents extremely slow when using Internet Explorer 8 behind Squid. When we bypass the proxy and go directly out to the internet all is fast and pages load fine.But when the proxy is on documents will take sometimes up to 6 minutes to load.This issue is only apparent using Internet explorer 8.I do not see the issue when using firefox with Squid.I have tried to use the no_cache directive thinking it may have been the cache but that didn't work either.I am attaching our access.log, store.log and squid.conf.
View 2 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedUbuntu lts server distro using on remote machine. i have remote site where internet access given via squid proxy. so when we enter in browser it start working internet fine. but on command line(bash shell prompt terminal) like wget,ping,nslookup,traceroute etc these commands does not work.
View 3 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I have an old FC2 box running Squid version 2.5. It has been running since 2003 so I am in the process of replacing it. I have a new machine with FC11, iptables, and Squid 3.0 installed.
On the old machine I use iptables to intercept Port 80 traffic and send it to Squid. By default I block all internet access and allow only sites that are in an Allowed_Sites.txt file. Within Squid I also have statements to allow certain users to bypass Squid based on their IP address.
I have set up the same thing on the new box. I have iptables intercepting the Port 80 traffic and sending it to Squid. That is working because if I remove the redirect statement from iptables all internet access is blocked.
The problem I am having is that Squid is not blocking any websites. It acts like the ACL is set to http_access allow all. I have worked on this for several hours and am stumped.
These are my Squid rules:
acl allowed_sites url_regex "/etc/squid/Allowed_Sites.txt"
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl SSL_ports port 443
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow Bypass_Users
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl our_networks src 192.168.1.0/24
http_access allow allowed_sites
http_access allow our_networks
http_access deny all
icp_access deny all
htcp_access deny all
http_port 192.168.1.254:3128 transparent
hierarchy_stoplist cgi-bin ?
access_log /var/log/squid/access.log squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
visible_hostname FC11.proxybox
icp_port 3130
coredump_dir /var/spool/squid
i want to setup squid proxy server at my home. my service provider has ISA server install on its machine. in windows as a client we have to enter proxy settings manually to IE and firefox. but now in squid where i have to define to use this proxy settings. and what about /etc/resolv.conf . my service provider's connection settings are stated as under.:
IP ADDR= 192.168.1.x
subnet mask=255.255.255.0
Proxy= 192.168.1.1 port= 8080
we having more than 5000 users and will have 7 squid proxy servers with high end configuration upto 4gb ram n 320*5 HD in rhel4&5 most of them complaining that at peak hours their browsing speed is slow but we are having 1gbpgs link at peak hours i.e when established connections r flowing more than 550 browsing gets slow how to do fine tuning are squid is only responsible to access upto 600 connections
View 2 Replies View RelatedI want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet
View 4 Replies View RelatedI have 4 servers running squid/3.1.1 proxy server. Since the latest version I can no longer FTP. I have posted this problem in multiple places but have received almost no response. I've found several other post to this problem throughout the Internet which have also gone unanswered. So, once again, I thought I'd give it a try. As I said "I have 4 servers running the newest version of Squid". When I try to access an ftp, any ftp, I receive an error (check attached image). This was never a problem until just recently. Squid should work perfectly find with ftp, it is not a strictly http proxy.
I turned my firewall off just to make sure, still had the same issue. If I jump directly on the server itself with no proxy settings set in the browser it will work fine. As soon as I set the browser setting to access the Squid software I get the same error. I've included my squid config (which is unchanged from the default settings), maybe somebody better versed than myself can point out an obvious flaw. Everything else seem to work just fine, it's only FTP that's a problem.
I followed this guide: [URL] and restart the Squid Server with no errors but when I try to SSH into it:
Code:
ssh -L 8080:squidserver:8080 user@squidserver
It just hangs there for a long time, not timing out and eventually (after a long wait) I get this:
Code:
ssh_exchange_identification: Connection closed by remote host
What could be the problem? I can SSH normally into the computer, but not into the proxy server. Do I need to forward the 8080 port on that network?
We have two offices suppose A and B. At office A, we use centos 5.3 computer as router and squid proxy server. At office B we use a cisco router to connect to Internet. Computers at office A that has direct access to Internet can access computers behind cisco router at office B using vnc viewer. But computers at office A that can use internet only through squid proxy can't access computers behind cisco router at office B. Is there any way so that I could allow squid clients to access computer behind cisco router at office B using vnc viewer.
View 3 Replies View RelatedI am a newbie to SQUID.How to configure it and make it active in my system?
View 1 Replies View RelatedI am using squid server. I want to redirect one perticular url request to other squid proxy server .
View 1 Replies View RelatedI am trying to install Squid 2.6 as Transparent proxy server.Can anyone provide the step by step configuration details
View 8 Replies View RelatedI have configured Squid proxy on RHEL 5. Now I want all squid clients to use default website which is set by Squid Proxy Server. So whenever user opens their browser they will visit same website automatically.
View 3 Replies View Related