OpenSUSE 11.3, Brasero 2.30.1 Brasero can't detect dvd-burner. Dialogs, that should allow burner-device selection is grayed out and contain only one option "No disc available". The device itself is known to be working. How to fix this?
View 9 RepliesI have been trying to burn an ISO to a blank DVD with Brasero Disc Burner, but every time I try, it gets at around 93% done, then gives me:
"The disc could not be ejected, though it needs to be removed for the current operation to continue"
I have attached a screenshot of the error. And this is not my error screenshot, I have a different DVD Drive. I just attached this one because I didn't want to wait for it to give me an error again so I could take my own screenshot.
Does anybody know why this happens? Or a way to fix it? Or a different software to burn ISO to DVD that is as simple as this one.
I'm using Ubuntu 9.10 and Brasero Disc Burner to burn .iso's (NON-ILLEGALLY. I'm burning linux distros on them.) . I'm using Sony DVD-R's that on the disk say 4.7 GB, but it says 3.7 on Brasero.
View 4 Replies View RelatedLast week I could burn dvd's and cd's and had no problem. I did the latest kernal upgrade for Ubuntu 10.04 yesterday and today I cannot get K3B or Brasero to recognize any type of medium weather blank or filled. Looked on the forum and there appears a bug in the kernal. Is there a workaround? If so how do I use it.
View 6 Replies View RelatedToday i tried to burn a dvd but i failed. When i was adding the folders, brasero poped up a message saying that it need to rename some files to make them windows compatible,i accepted the change and proceed. Everything was looking good, but qhen it tried to burn, brasero said it cannot burn the image and failed. Asked if i want to save the log file and i did it, but it has no info!
I tried diferent combinations to burn the dvd (removing the files that need to be renamed, even i tried to burn the files to a iso image) and alwas fail exactly with te same error in the same step.I instaled the gstreamer packages from packman and all looks good.Any idea whats going on? Also, if someone has the same problem, maybe it's a bug in brasero that needs to be reported: if so, how can i get usefull info to report it?
All I recently downloaded SuSE 11.3 but still currently running 11.2. I open brasero and try to burn a DVD but it does not recognize a blank CD/DVD in the drive. Any ideas? I have no problem with the DVD drive when I put a CD in with information it mounts right away
View 3 Replies View Relatedim trying to burn an audio cd with brasero,when i select the audio files to add to the project i get an error message saying :"Track 1.wav" could not be opened." and :"Track 1.wav" is not suitable for audio or video media."i also tried the "copy cd" option,the program recognizes the audio cd in my drive but when i press the copy button the window disappears and nothing happen.i had a similar problem lately see thread - cant burn dvd,but this time i want to try and use brasero instead of k3b
View 7 Replies View RelatedI got the following error message from brasero-session.log when trying to burn a 7.7GB ISO. My system is openSUSE 11.4, Gnome 2.32.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]...
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View RelatedLooking for codic pack or it called plugins for brasero 2.30.1
View 9 Replies View Relatedso i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies View Relatedi cant seem to load mp3s into the stock burning program - "Brasero". i get this error message when i drop an mp3 into the program: "xxx.mp3" is not suitable for audio or video media.
View 6 Replies View RelatedI've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
i just recently installed a hp DVD writer dvd200i in my computer and it wont read or write DVDs, yet it reads and writes cds perfectly.I actually think its a driver issue my computer is ide and 4 yrs old if that helps any with Linux Mint
View 8 Replies View Relatedon windows there are apps that detect my hardware and list the model numbers and even serial numbers.
is there an app for opensuse that will detect all my hardware and list it like this:
cpu: p4 2.8ghz serial num. 435435345
chipset: intel 243434 northbridge
ram slots: 2 ddr3
etc
etc
i'm trying to burn an iso file to a CD but brasero seems don't work. what else is there that will work?
View 8 Replies View Relatedonce I get to the terminal command window, how do I start the dvd iso burner? standard ubuntu 10.04 x64 client install.
View 2 Replies View RelatedIt's been a while since I hosed my system, and I finally stopped procrastinating to backup, format, and reinstall. The latest disc I have available is 9.10, and getting new ones is a feat now that Canonical won't mail them to me. So I installed 9.10 and immediately upgraded to 10.04; somewhere in there it asked me where to installed GRUB and I told it sda1 but not sda, which was apparently a mistake.
I got an error about "grub_puts_" being undefined and used this guide per a relevant thread. I rebooted and got through GRUB, but now all that comes up is the purple background and my cursor; the mouse doesn't move, not that there's anything for it to click anyway. I went on #ubuntu IRC and was advised to do a clean install rather than an upgrade.
Of course I can just stay with 9.10 but would prefer the latest (of course it's about to be obsolete anyway...). I have also heard that it's possible to install to a USB drive; I'm guessing that likewise requires a CD? I guess what I'm wondering is whether I can use a 9.10 install to download and install 10.04 directly to a different device? Finding someone who has a CD burner is a real hassle.
I am trying to burn an .iso but Ubuntu won't see my burner at all.. Newb to ubuntu, I am on 10.10.
View 9 Replies View RelatedI am looking for a Iso CD Burner Program that runs on Ubuntu.
View 4 Replies View RelatedI just installed Ubuntu on my newly built computer from a USB drive. I have tried to install a LG DVD burner but when I insert media the computer does not recognize my player.
View 7 Replies View RelatedI'd like to replace my HP CD-Writer+ 8290 external CD burner. It works fine with Windows but is flaky in working with Linux (across multiple distros).I'm interested in buying an external DVD burner. If you use an external DVD burner with Puppy Linux or any other Linux distro, what are you using?Is there a list of external DVD burners that work with Linux?
View 1 Replies View RelatedAnother step before turning to Linux. My DVD/CD burner is not supported by Linux. Can someone suggest a cheap burner that works well in Linux. My travails thru Newegg and other locales has borne no fruit.
View 8 Replies View RelatedI am looking for a full featured CD/DVD, Image burning program. I have mostly used simple programs but is there one somebody would recommend that is full featured and/or opensource/Just Free.
View 5 Replies View RelatedI bought a new notebook HP Presario CQ56 with Linux openSUSE 11.0 Everything works and the Bluetooth device is ON. Also the one in my cellphone. But the one in the PC does not detect any device and ergo cannot configure it.Got Bluetooth Applet 1.8 installed.In #suse and #bluez IRC chats couldn't give me a hand =/
View 5 Replies View Relatedi downloaded image writer and it doesnt detect my usb drive, it is working fine my window detected it, but image writer doesnt. Why is that?
View 3 Replies View RelatedI recently installed openSuse 11.2 on my Dell 700m. Since installing I have been scouring threads, google, etc to figure out how to get USB devices to be recognized.
View 9 Replies View RelatedStrange to me that a search only seemed to turn up some partial instructions for enabling detection of new USB devices (not discoverable in a default install) in 11.1 and no later. I assume perhaps incorrectly that things have changed since so attempted the following.
Objective: Discover an HTC G1 phone to use as a modem. So, after the phone is discoverable by SuSE the next step would be to configure the connection.
Current: It seems that this phone is listed in /etc/usb_modeswitch.d/
Attempt: I assumed incorrectly it seems that it should have been sufficient to simply create a file in the /etc/usb_modeswitch.d/ directory with the appropriate TargetVendor and TargetProduct codes as follows
Filename: 0bbr:0c01
Code:
########################################################
# HTC Android G1 Phone
DefaultVendor= 0x0bb4
DefaultProduct=0x0c01
[Code]....
I need the proper way to do this in OpenSuSE 11.3. A bonus would be if someone could verify that after the modem/phone is recognized whether the next step is to configure the device using YAST/modem.