Ubuntu :: Overburn With Brasero Or Burn .cue + .bin?
Feb 18, 2011
I need to burn tracks that total to 80-82 minutes on 80min CDs. However, Brasero stops the burning process right at the start complaining there is not enough space on the CD. I tried having Brasero create an image and burn it with k3b. However, Brasero creates a .cue and a .bin file, but when loading the .cue file, k3b says that it does not seem to be a valid image, even when selecting ".cue/.bin image" or "audio cue file" as the image type. k3b itself refuses to burn .mp3 files without manual conversion. what should I do to achieve my goal?
View 4 Replies
ADVERTISEMENT
Oct 31, 2009
I got this 703MB iso, debian-live remaster and I wanna know if its possible to burn this to cd-r?
what is the "overburn" limit for a 700mb cd-r?
memorex
52X
700MB
80min
View 1 Replies
View Related
Dec 25, 2010
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies
View Related
Jul 27, 2011
I am trying to burn a image file to a CD-R, but it fails to start the burn process. Below is the error log.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]....
View 1 Replies
View Related
Jun 21, 2010
running lucid and whatever updates are current.Im attempting to burn a avi to dvd format with brasero, but when i hit "burn" brasero sais "ejecting disc" and says that an internal error has occurred. the saved log is blank.any thoughts? i have dvd author and the error message doesnt appear until the disc has ejected. but really it should not be ejecting if it is going to perform a burn.
View 2 Replies
View Related
Jul 3, 2010
Both my cd/dvd drives work fine out of xp so they're connected properly.
I tried to use Brasero to burn an iso to a cd; Brasero responds with the message "Please replace the disc with a supported CD or DVD." But my Sony and Maxell discs should be supported, so what could be causing this message?
Is the bash command cdrecord an alternative to Bresaro? If so then what is the command syntax to burn file.iso to a cd in a cd/dvd drive?
View 3 Replies
View Related
May 7, 2010
I sometimes get downloads, usually of linux OS's where the file is too large for a cd and has to be formated as a dvd. When I try to burn it to a disk, I keep getting something that says I need to insert a blank dvd.
Problem is, I have a blank dvd in the tray all ready to go. The unit I'm using is a Sony external dvd burner hooked up by a usb. Bresero wouldn't touch it, so I installed k3b (this is in Ubuntu10.04) k3b could read that I had a blank dvd in the drive, but when I pointed to what file I intended to burn, I kept getting the "insert blank dvd", and it wouldn't start, even though the screen in the background could see that the dvd was loaded and ready. No problem for cd's, they'll burn like an oil slick on the Gulf of Mexico.
View 3 Replies
View Related
Feb 27, 2010
I created a system backup ISO with remastersys that's about 3.4 GB, and I've repeatedly had failure and about 4 coasters now with both K3b and Brasero trying to burn it. I even ditched the original ISO and made another- same problem.I have always had problems burning discs in both programs, and of all the times I've tried to burn anything with either, I've gotten errors near the end of the data check stage, in verifying the data burned. I'm really tired of this, and I need this ISO perfect to reinstall my OS on a new laptop harddrive.This time it's K3b. It burned successfully, but I get errors in the data verification stage. Here's what I got:
Code:
System
K3b Version: 1.0.4
[code]....
View 4 Replies
View Related
Jun 10, 2011
I used to burn CDs/DVDs with Brasero on my old Dell PC running various Ubuntu distros, till it started producing faulty discs. There were other problems with the old machine, so I started burning discs on my Toshiba laptop (Ubuntu 10.04) using Brasero - no problems at all. Now I've got a new Dell (Ubuntu 11.04) and, strangely, when I tried to burn some CDs with Brasero, it took 5 attempts to get 2 good discs - not a good success rate. Tried again with Open CD/DVD Creator on the Dell - no problem. 100% success. So is it Brasero? Is it Dell? Is it newer Ubuntus? The discs haven't changed, they're Verbatim.
View 3 Replies
View Related
Jan 2, 2010
I am burning an ISO of Ubuntu 9.10 amd 64 desktop edition. I am using the same operating system but need to burn the ISO to do a clean install.
My Specs:
Ubuntu 9.10 (karmic)
AMD Turion(tm) II Ultra Dual-Core Mobile
L2 Cache 1024
4 GIG Ram
Cd-drive: Hp DVDRAM GT20L
Here is the log file that shows up every iso burn fail.
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping .....
BraseroWodim process finished with status 254
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 0
message = "no message"
BraseroWodim stopping
BraseroWodim got killed
Session error : unknown (brasero_burn_record brasero-burn.c:2811)
View 5 Replies
View Related
Jan 3, 2010
I created a few 'images' with Brasero a few days ago to burn at a future point in time, today. The first thing I noticed while copying the 'images' is that there were two files, one sans extension and one .toc, not the single .iso I'm used to dealing with.Unfortunately I did not have internet access while copying so I was unable to obtain clarification or how to proceed. So now I have around 50 of these pairs I would like nvert to music CDs.After much Googling I have yet to obtain any relevant info on how to proceed.
View 2 Replies
View Related
Apr 20, 2010
My son is using 9.10 as his only OS on a Advent 5431 laptop, with a Intel Pentium Dual Core Processor T3200, 1024MB of RAM, 160 GB HD and a Integrated Graphics Card. The problem is this,e was trying to burn/rip DVD's using Brasero the laptop kept shutting down for no reason that he could see, now when trying to do anything again it keeps shutting down when using Oos or just browsing/facebook/myspace/MSN. Has anyone any ideas why this could be happening?
View 4 Replies
View Related
May 12, 2010
I am having problems burning audio CDs with Brasero 2.30.0 after my upgrade to 10.04. I was trying to burn a .wav file to CD but Brasero ejects the media without burning anything after transcoding the wav file and creating an image. I'm attaching the error log to aid in debugging.I can burn data CDs fine. My burner, a Samsung SM-308B, can't burn DVDs so I don't know about burning them.
View 9 Replies
View Related
Jan 12, 2011
I'm using Brasero to burn DVDs and I'm burning at 4x speed (the DVDs and the DVD burner both support 16x max). The problem is that while burning, the speed is too low and it jumps around between 1.5x and 2.4x. This seems weird to me.shouldn't the burn process fail if it drops below 4x or if the speed is as unsteady as it is? But the DVDs seem to turn out fine anyway.
View 3 Replies
View Related
Jul 10, 2011
I have been trying to burn an ISO to a blank DVD with Brasero Disc Burner, but every time I try, it gets at around 93% done, then gives me:
"The disc could not be ejected, though it needs to be removed for the current operation to continue"
I have attached a screenshot of the error. And this is not my error screenshot, I have a different DVD Drive. I just attached this one because I didn't want to wait for it to give me an error again so I could take my own screenshot.
Does anybody know why this happens? Or a way to fix it? Or a different software to burn ISO to DVD that is as simple as this one.
View 4 Replies
View Related
May 13, 2011
I'm having troubles with brasero 2.30.3 running on sid, it fails to burn iso. I've tried 3 cds and still getting error:
View 3 Replies
View Related
Aug 20, 2010
This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
View 9 Replies
View Related
Jul 12, 2011
im trying to burn an audio cd with brasero,when i select the audio files to add to the project i get an error message saying :"Track 1.wav" could not be opened." and :"Track 1.wav" is not suitable for audio or video media."i also tried the "copy cd" option,the program recognizes the audio cd in my drive but when i press the copy button the window disappears and nothing happen.i had a similar problem lately see thread - cant burn dvd,but this time i want to try and use brasero instead of k3b
View 7 Replies
View Related
Jul 11, 2011
I got the following error message from brasero-session.log when trying to burn a 7.7GB ISO. My system is openSUSE 11.4, Gnome 2.32.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]...
View 7 Replies
View Related
Jan 4, 2010
well i tried burning puppy linux through brasero k3b and gnomebaker and this is what i got with brasero as a unknown error
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1799)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]....
View 3 Replies
View Related
May 13, 2010
I've just installed Xubuntu last night on a spare drive because I really wanted to try it out. Install and initial setup (upgrades, extras and so on) worked like a charm, then I got to burn an audio cd with Brasero starting from some mp3s floating around my external media drive. The burn process itself went good and the CD is fully readable, but I notice that CD-text is missing.
So, when I added files to the main window of Brasero id3 tags were there (I've seen them, plus I set each and every of them via Easytag before putting the files in my external media drive so I'm sure of that), but once the CD was finished there was no CD-text at all. Maybe I just have to download some additional packages which aren't included in Brasero or have missed some menu item about CD-text?
View 4 Replies
View Related
Dec 9, 2010
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies
View Related
Nov 29, 2010
Forgetting bad past experience (in debian i386 and amd64), I have newly lost a new DVD in trying to create a data disk with brasero with debian i386. After successful simulation at the lowest speed, burning failed and I expect that the disk is no more good (this occurred in the past). In the past I complained with debian, getting no answer.
In contrast, I tried k3b with full success. However, as a gnome user, installation of k3b brought in so much of kde that proper use of gnome was prevented. Can anyone tell of an installation of k3b that does not hinder gnome? In particular not the startx procedure (as I normally work without calling the x server).
View 3 Replies
View Related
Jul 21, 2010
I recently switched distributions, I let a guy talk me into switching from Ubuntu 8.04 to Mint 9. Since the switch, I have had a lot of issues that I have mainly worked out myself. I have posted all of it on the Mint forum, but there hasn't been much help available there. I have been told that Mint 9 is based on the newest release of Ubuntu (Lucid Lynx), so I thought I would post over here to see if anyone could help me. The only thing that's still giving me fits are the 3 software programs above. Using k9copy and trying to burn directly to disc, I am getting the error that I took the screenshot of. I then burned it as an iso image and saved it, then tried to use k3b and brasero to burn it that way and got errors with both of those programs.
From k3b:
Devices:
LITE-ON DVDRW LH-20A1S 9L08 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW,
[code]....
View 7 Replies
View Related
Apr 4, 2010
I recently tried to burn an ISO image to a DVD. Everything seemed to be going fine except Brasero froze at "Finalizing". It stayed there for about 10 minutes before I gave up. When I hit cancel nothing happened. When I tried to eject the drive nothing happened. Not until I shut the computer down and restarted was I able to open my DVD drive. Upon trying to read the disc no computer shows that it has anything on it.
View 13 Replies
View Related
Dec 17, 2010
This is my first time creating a video DVD from other video files. I drag and dropped 2 .flv files to the area where it tells you to drag them. They appeared there. Then I clicked "Burn..." and brasero disappeared.
I ran it in terminal and this is what I got:
Code:
View 5 Replies
View Related
Dec 28, 2010
I have both Brasero and GnomeBaker and none of them can overburn CDs or DVDs, even they cannot burn data DVDs if the folder which I want to burn has an amount of files of 4.4 Gb (when the DVD size is 4.7 Gb!). How can I overburn CDs or DVDs?
View 5 Replies
View Related
Sep 9, 2010
I have a freshly installed 10.04 ubuntu, but brasero is not starting, what could be the reason? I started it with the option to show errors, but it didn't show any, it just didn't start.
View 3 Replies
View Related
Feb 12, 2011
I have tried burning media files as data into a DVD (-R). Failed every time. It simulates the burn, and when it starts burning it sometimes ejects the media and at other times just says that it cannot eject the DVD and that it has to be done manually. After the DVD is ejected it errors out.Attaching the log file.
View 2 Replies
View Related
Mar 20, 2011
I've previously been able to copy CDs using Brasero. Now when I try, the program will copy the disk, but instead of pausing to allow you to insert the destination disk, it will simply eject the disk and then quit. I can copy disks by selecting 'copy to image' and then burning the image, but this is a pain.
View 3 Replies
View Related
