I'm trying to make my F10 Laptop a wireless Access point.
When I 'iwconfig wlan1 mode Master' I get:
SET failed on wlan1; Invalide argument.
wlan1 is a Netgear WG111v2 which worked as soon as I plugged it in after I installed F10.
I don't know is it not supported? What is? Is there a different driver I can put on that will work in master mode.
What should I do basically?
I have a windows 7 (64bit sadly) desktop computer with no wireless capability. Now before I go out and spend money on a wireless usb thing, I was wondering if I could use my laptop (Ibm think pad T60 running ubuntu 10.10 dual boot with crunch bang) As a wireless access-point and connect via Ethernet cable the laptop to the desktop (Probably through a modem?) so I can use the Internet for games on the desktop computer. (Games that wont work in wine, sigh). Just a note though, 64 bit windows 7 will NOT run anything.
View 1 Replies View Relatedi have a router, i use it to connect my LAN to internet. Now, my LAN only coneck via cable, i want to try make my router to be a Acces point to routes the LAN whitch use Wireless.
View 1 Replies View RelatedI'm sure that some of us techies have found the need from time to time to have a portable wireless bridge (see ascii art below) on our jaunts into the big bad user-woods, and I am here to ask the question of HOW to pull this off, with the least installation/configuration possible, as my tech lappy is also my main computer. What I want to do is this:
Code:
(ISP) -> (wlan0 - [MyLappy] - eth0) -> (Client computer)
Basically, thats a mess, so i'll explain it further:
wlan0 grabs the netz, and a computer connected to eth0 via switch/router/crossover cable can access those netz.
1. No configuration on the client would be prime choice rib for me.
2. Client should be any OS/Arch.
Any grand ideas out there? Currently using FC10, with various extra repos enabled.
Oh, and N00by alert, I'm learning quick, and am not shy to try new/complicated things, just bear with me!
OK, what I want to do, I think is possible but I dont kno name of it or how 2 do it under even windows for that matter. I have my current PC connected via Ethernet directly to my house router. Now on this Motherboard, I also have a wireless nic that I have no plans on usin. Can I turn it in2 an access point/wifi for other devices like iPods, Wii, Labtops, ect?Also, how would I do it if not Wifi, use the other Ethernet port to plug up say a labtop. In which the labtop uses the net I am getting from the router?
View 1 Replies View Relatedi ahve just installed fedora 11 kde edition and i used to use fedora 10 after finish installation i edit the connectons to connect to my network im in lan network but i connect my cable to an access point to free using my laptop anywhere after adding every thing (wep key ,static ip's,) as i used to do and i have the connected sign at the system tray.i open the browser but no internet connection pinging the gateway returns "Destination Host Unreachable".
View 1 Replies View RelatedI am looking for help on how to create a wireless access point using fedora core 12.I have done some searching and have not found anything.
View 1 Replies View RelatedI have a laptop with Fedora installed and an iPad.The only connection to internet in my house is wireless router. It has strong signal to catch it with laptop in every corner in my house, but not strong enough for an iPad..Since my iPad is mostly near my laptop, I'd like make my laptop to be turned to wireless repeater or that serves as access point so I can connect to network with an iPad.How can I do that from my Fedora machine?
View 1 Replies View RelatedI'm new to Linux and I have a problem with the Wireless connection.I've already searched for this problem but found so many threads it was impossible to sort it out.I've just installed Fedora 13 (Live CD - Install to Hard Drive) and apparently it's kinda... "empty". But my problem is with the wireless connection. There is a free network provided by my city for all the citizens. It is Open (authentication) for all. The problem is I can't "see" the network in Feodra. In Windows 7 I can "see" it just fine with 3 bars signal strength. It is great for surfing and emails. It is not intended for heavy downloading.
Why can't I "See" this network? There is another weird thing. The neighbor above me has a Wireless access point closed of course but I get 44% signal strength in Fedora and Full bars in Windows. Does it have to do anything? Maybe the low signal of the free network is the problem and Fedora makes it disappear completely?
if exists a software to use a laptop as an access point
View 1 Replies View RelatedUbuntu 10.10 (kernel 2.6.35-23, amd64), Network Manager is installed, the laptop HP 6735s (I am certain that wifi is working, - I can connect to other wireless networks), connected to the Internet through ppp0 (VPN), eth0 looks at LAN interface, WiFi - eth1 (info from iwconfig).
WiFi driver "Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, andBCM4322-based hardware" is installed.
Objective - to create WiFi access point and connect through it to ppp0 with my phone (HTC Desire) or other devices.
My VPN connection (ppp0) and network are registered through my internet provider's script - [URL], not set up not by Network Manager. If I create a new wireless network in NM (point-to-point or access point, IPv4 set to auto) - laptop can not find the network, Internet immediately fall off. Through the manual settings and complex scripts that I found websites and forums I could not get it to work ..
one of these "WiFi works in Gnome, not in KDE" threads, but I have been all over google and hundreds of threads across different sites and can't figure this one out.As mentioned, wireless is peachy in Gnome, unfortunately I like KDE and I'm more productive using it (when I have internet). Wired network works fine in KDE, and my network card
Code:
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1201
[code]....
I'm trying to get wireless access on a laptop with freshly installed Fedora 14 32-bit, but I'm having some issues. I ran the diagnostics advised in this thread: [URL]..Here are the results:
Code:
[root@localhost]# lsmod | grep iwl
iwl3945 97265 0
iwlcore 160590 1 iwl3945
mac80211 188648 2 iwl3945,iwlcore
cfg80211 110951 3 iwl3945,iwlcore,mac80211
[Code]...
I have a Sonicwall access point, which I am able to set up through the interface, but after that I am unable to achieve a connection through my wireless card. I have a good understanding of everything involved, but really have no hands on experience when it comes to networking.
Code:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
[code]....
Also, I should have mentioned that @ the interface for the Sonicwall it said that "no DNS server had been specified", but I set it up for DHCP, and I thought my ISP is using PPPoE (which I also thought used DHCP).
i've finish install driver for my wireless adapter and the result like this:
Code:
rapc0d@rapc0d-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code].....
I just installed the wicd network manager and when i was setting it up it said it couldn't find the ip address so when i input the address its saying it can't connect to a wireless access point. I am using wireless that has worked with the default network manager but will not work with this one.
View 1 Replies View RelatedI'm trying to set up a wireless access point and router using Ubuntu 10.10. My machine has an Atheros AR5001X+ PCI card, and eth0 is connected to an ADSL modem.After literally days and days of going in circles, I'm hoping that somebody here can help get me on track.This sort of works, though I had to go through some other contortions to get the madwifi driver to finally compile on my machine.At this point, I can see and connect to the WAP, but nothing more. When I try "sudo /etc/init.d/networking restart",
I also have a second problem, which is that I want to use WebMin to manage this server, but I cannot figure out how to get the ADSL client module configured -- RP-PPPoE version 3. It seems to expect to work with pppoe-start, pppoe-stop, and pppoe-status, but when I try to run pppoe-status it says "Link is down", even though my ppp connection is actually working.Is is possible to use the WebMin ADSL client module with Ubuntu? I spent a lot of time trying to get pppoe-start, stop, etc. working but it was a complete mess and never seemed to behave. Finally, I just put the ppp startup commands into the /etc/network/interfaces file and that worked, but now the pppoe-* commands no longer seem to function.
I installed it alongside Win XP, using Wubi, and it seems I use Ubuntu 10.04.Everything worked out as expected, and my wired internet connection works like a dream.However:My wireless connection seem a little buggy.I can see all networks (except WPA2) so even if I want to fix the WPA2 problem, I'd rather just open my network for now.
So my network is now open, I see it in the NetworkManager list, and as i try to connect, the following happens:The wireless symbol start flashing. From here it keeps flashing, untill it gives up.I use RT2870 drivers, and D-Link DWA-140 USB wireless adapter.
It goes without saying I am a freshman regarding Linux, so if anyone knows what to do, and cares to take the time to tell me, please do tell me in a detailed manner.I do know the basics of the Terminal, and yes, I do know how to copy/paste commands I find linux way more satisfying than Windows so far ... And thanks in advance for giving away your time More info can be given upon request (You might have to explain how to find that specific info)
I'm going to be working in an office with no wifi and no 3g signal but my laptop will be connected to the web via a wired network.Any way I can use the wifi card in my ubuntu laptop to create a wireless access point so my phone can connect? Would have to be easily selected and deselected as I'd then want to use wifi to connect to the internet at home.
View 1 Replies View RelatedI have an Intel PRO 2200BG wireless card and can connect to my router when logging in via gdm (using Xubuntu.) No problems there, connection never drops, very reliable!
But I've since had the need to shutdown X and keep a simple terminal instance open but as soon as I stop gdm the connection to the router drops. Trying to connect via the terminal using wpa_supplicant has so far been unsuccessful.
I know for a fact I'm doing something wrong, just don't know what and would appreciate some help!
Some dumps:
Code:
Code:
Code:
Code:
I started using Arch just a few days ago. forward traffic to the Wireless access point I created on arch. i am using cable internet (ppp0) which I want to share via a usb wifi adapter running as a WAP. I followed the instructions in this link to enable the AP mode. Afterwards I followed the instructions provided in the Arch Wiki to forward the traffic but because of my inexperience I am still unable to connect to the internet. Here is the output of iptables -nvL :
Code:
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
77 31312 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
[code]....
I'd like to create a wireless network so that I can connect my iPhone to the internet. I made a new network, the iPhone sees the network and apparently connects, but Safari doesn't work. It doesn't work with the default settings, and I don't know what to put in the fields. Could anyone give me a small tutorial?
View 4 Replies View RelatedI am in a situation at the moment which means I am going to be without an ISp for a week or two, and I can't survive that long without the intenet!!! What's more, I have 8 computers that need to connect, though not necessarily at the same time, but certainly more than one at a time. Anyway, I came up with an idea to buy a Mobile Broadband Dongle, and then share the connection via my PC. Problem is, I don't know how I would go about setting my PC to be a Wireless Access Point/makeshift Wireless Router, and sharing the connection.
View 9 Replies View Related1. HP Mini 110-3000
2. 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
3. wlan0
4. cant find...
5. nothing come out...
6. *-network DISABLED
7. wlan0
8. Description:Ubuntu 10.04.1 LTS
9. 2.6.32-24-generic i686
10. * Reconfiguring network interfaces...
I cant see any access point from my router...
I have configured my router to behave like a wireless access point. I'm using hostapd as the utility to manage the access point. I am able to connect to the access point from my android phone.Now i need to send a file to the android phone from the access point.
View 1 Replies View RelatedI'm trying to setup my ubuntu server as an access point but am running into some issues.
The server has an Atheros wireless card (AR5008 chipset) and I have used the following link to set it up in master mode using madwifi drivers: [URL]
I then used this link to set it upas an access point using hostapd. [URL]
But inspite of following the above steps, other wireless clients in my LAN are unable to see the ssid "Linuxmaster"
Although iwconfig shows that the card is in master mode.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:"Linuxmaster"
[Code].....
10.04 in a couple of identical lenovo laptops (of friends) suddenly have stopped connecting successfully to wireless, coinciding approximately with a mains power socket fail at the modem router, now fixed. presumably the machines were trying to connect to the access point, which may or may not have been working, but themodem router was not. Now, internet connection and wireless access point is fixed ok and is back up, and i can connect wirelessly to the access point ok using an eeepc with 10.04.2 with no problem so the access point is working ok
the target laptop/s are still ok via wired ethernet, and can *also* connect to a neighbours open wireless (a british telecom so called fon network, it asks for an account password), and all local wireless networks can be seen normally, and the home access point ssid can also be seen ok. so the aptop wireless is connecting ok, but not to this particular access point now. maybe someting has got screwed up? it is wpa2 and when clicked, after a long-ish time, the authentication is requested, then given, correctly, and still not connecting, asks for authentication again etc etc. no local secure wallet is being used.
when upgrading these laptops for my friend some time ago from 9.04 i have a small recall that 10.04 had a odd thing with wireless authentication (?) bug? i have deleted the network connections gui listing for this ssid and restarted the laptop, still no joy.
The garage in my house is a dead spot for my current wifi router.I can't get a signal there.Moving my router within the limits of my cabling doesn't fix it. But I have two other routers I'm no longer using.Is it possible to use one of them as a wireless access point to extend the range of my current router?If so, what is the general procedure for doing that? My main router is a Verizon Actiontec M424WR. My other unused routers are a D-Link and a Netgear, both of which have wireless capability. The Netgear had a superior range, as I recall.
View 8 Replies View RelatedI am trying to figure out how I can see which access point my wireless card is connected to. I have a slackware system and. Basically, I know my card is connected to something, because firefox can do a google search, but I'm not sure what network it is connected to, since there are a couple open networks in my apt complex. Is there a command to list the ssid? that I'm connect to? and, I'm new to all this so I'm not sure if ssid is the correct term. I have a consumer grade netgear wireless "router" that I bought from bestbuy which has a "passphrase".
View 2 Replies View RelatedI have had this configuration at home for years, but I just changed my line provider and I cannot get it to work.
I have a desktop machine with two ethernet interfaces, eth0 and eth1. Etho is connected to the cable modem and that seems to be working fine - well, I'm posting here, right? Eth1 is connected to a Linksys WAP54G wireless access point. I have eth1 set to 192.168.1.240 and the AP set to 192.168.1.245 (the default). The desktop runs CentOS and I have dhcpd running, and I have focused on the dhcpd.conf file, which I have changed many times. Here is the latest incarnation:
Code:
#
# DHCP Server Configuration file.
# see /usr/share/doc/dhcp*/dhcpd.conf.sample
#
[Code]....
