i just installed fedora 13(fresh install) everything worked fine so i wanted to install the nvidia drivers (using akmod) everything went fine so i rebooted it. It started fine showing everything as[ OK ]But after showingEnabling monthly Smolt checkin: [ OK ]Starting atd: [ OK ]It stops rigth there...I dont know why, i just can reboot and cant go any furtherThe next one must be service local, but cant get it started
View 3 RepliesI have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:
One or more of the mounts listed in /etc/fstab cannot yet be mounted
/: waiting for /dev/loop0
/tmp: waiting for (null)
/boot: waiting for /host/ubuntu/disks/boot
Press ESC to enter a recovery shell
I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.
Ever since I installed Maverick Update Manager it hangs when I update and I eventually have to kill it.
View 3 Replies View RelatedThis morning I did an update on a current F13 system with NVIDIA Graphics card. System gets to a complete white bar across the screen followed by "FEDORA 13" . This all starts blinking and goes no further.
View 7 Replies View RelatedI recently updated my fc12. before the update all was well but now it takes very long to boot. when i checked the text output by pressing F3 it stops at "Applying Intel CPU microcode update".
View 1 Replies View RelatedMy skill in fedora linux is all acquired by reading online and trial and error. I manage to set up my squid 3.0 proxy server in fedora 11. It is working smoothly as I wanted it to be. I have one client who is running bittorrent that drags all the bandwidth of our network.The problem is I cant make my server work tranparently. I want to make transparent proxy so that it can support my wireless router and I want to control the bandwidth to a fair level for everyone without them knowing.
Please somebody help me configure iptables in step by step, specifically in fedora 11. And all other necessary configuration needed to run my transparent squid 3.0 proxy in fedora 11.I know there's a lot of Linux Genius here that can help. Please help me I needed it badly.
I just installed the new 2.6.27.5-37.fc9.x86_64 kernel from the updates-newkey repository, and I've discovered that the new kernel boots much slower than the 2.6.26 kernel and requires manual intervention to complete the boot sequence on my laptop.
Details:
1) My laptop is a HP dv9708us with 17" AMD Turion dual core 64bit system, 3Gb memory, two SATA drives. One drive (a Fujitsu 160Gb) was installed by HP, and I added a second (a Hitachi 320Gb) drive in the empty secondary drive bay.
2) I have Fedora installed on the secondary drive, but I boot from GRUB using the Kubuntu /boot directory on the first drive. I do that because GRUB cannot properly access the secondary drive. (GRUB reports (hd1) as avilable, but can't "see" any partitions on it.)
3) When the 2.6.26 kernel is booted, the ATA driver produces several messages about the secondary drive being "frozen" untill it reduces the access speed from 3Gb/sec to 1.5Gb/sec. Thereafter it works normally. (I asked in http://www.linuxquestions.org/questi...to-fix-678903/ how to fix this, but received no replies.)
4) When I boot the new 2.6.27 kernel, the boot hangs for a minute or so for each attached USB device and then appears to hang completely while trying to access the secondary ATA drive. The manual intervention that resolves the problem is to repeatedly push the "control" key, which will cause the ATA error messages, seen with the older kernel, to be displayed and the boot to finish.
5) Even with the manual intervention, the boot process requires about five minutes to complete. This is considerably slower then the boot time required by the 2.6.26 kernel on the same hardware.
6) Without the manual intervention the boot process had not completed during the time it took me to shower, shave, and get dressed this morning - about 45 minutes.
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedI was in the middle of an update on my acer mini one netbook with 10.04 netbook remix and had to leave. I closed my lid hoping to continue de update home. When I try to boot up, the machine gets to the login screen and it seems that it freezes there. I tried rebooting and going in to safe mode and it seems that it freezes also. I got a liveUSB and decided to try that and it works, but my data on one of my partitions is old, theres nothing of the new files I had earlier.
View 6 Replies View RelatedI had Ubuntu 10.04 installed on my machine and I updated to 10.10. When the pc rebooted the following appears:Ubuntu Maverick (Developer Branch) "computer name here" tty1And it asks me for my username and password, after that is justs stays there, I've tried the startx command but with no luck
View 8 Replies View RelatedI have an acer laptop with ubuntu 10.10 running parallel with windows 7. I installed ubuntu using wubi installerA few weeks ago I updated my system from ubuntu 10.4 to 10.10 and had problems booting to ubuntu. I copied the c:ubuntuwinbootwubildr to c:wubildr after which I was able to boot to ubuntu and it was working fine.Today I have allowed an update on ubuntu and have the same problem as before. I cannot boot into ubuntu anymore but can boot into windows. I get an error No wubildr when I try to boot into ubuntu.I have tried doing the same copy of the wubildr file but still getting the error.
View 7 Replies View Relatedafter update to tle latest -current using slackpkg my slackware not boot. After hit enter after bootprompt the pc restart.
View 14 Replies View RelatedUpdate Manager showed updates available so I installed them about 1hr ago. When the update was complete I clicked the "Reboot to complete installation" button.
Upon reboot I received the following error message...
Code:
Kernel panic -not syncing : VFS : unable to mount rootfs on unknown -block(0,0)
Pid :1, comm: swapper Not tainted 2.6.35-24-generic #42-Ubuntu
I rebooted and was taken to a boot menu. Both the most current version 2.6.35-24-generic and 2.6.35-24-generic[Safe Mode] gave me the same errors so I booted the the previous version 2.6.35-23-generic
I then ran the following in the console...then did a reboot
Code:
sudo update-grub-update
The result was Grub Rescue Shell where I did...
Code:
set root=(hd0,1)
linux /vmlinuz root=/dev/sda1 ro
initrd /initrd.img
error: couldn't read file.
initrd.img is there but it can't be read.
xubuntu 8.04 on inspiron 8100
Applications>Settings>Settings Manager>Autostarted apps Update notifier is unchecked
There does not seem to be any Preferences in Update Manager to tweak either.
Is there some file I can edit with nano? Or maybe there's a script I can rename to not run it at startup?
I recently got the Message, that i should do a partial System Upgrade. It included an update to Kernel 2.6.34. Since this update, i cannot boot with this kernel:
Code:
Mounting none on /dev/ failed...
i can still boot with older kernels, but many drivers including wifi and graphics drivers dont work there anymore.
I ran update manager in 10.04 and after downloading/installing a few updates my computer will no longer boot. All I get when starting up is
error: no such device: 5bf7115d-b1e0-4c0e-aebe-6ffefdc7f3d0
grub rescue>
Where do I go from here?
I've got a problem with my Ubuntu Server 11.04 amd64, I think the problem comes from GRUB 2. Here is my problem : I updated my server and I now have Linux 2.6.38-10-server (in addition to 2.6.38-8) and, when I try to boot on version "10", I think I have a Kernel Panic because the screen keeps black and there is no use of the HDD (I can ear it working with version "8"). I also looked at /boot/grub/grub.cfg and I didn't saw any diference between the lines for v10 and those for v8 (except for "8">"10" of course).
I tried with Recovery Mode too, with this result : Loading Linux 2.6.38-10-server... Loading initial ramdisk...
> No use of the HDD (I don't ear it), and it's "frozen", can't do anyting but reboot it by ACPI (nothing happend when hitting "Num Lock") Another question : can we have no submenus in Grub2?
i guess it is because my USB mouse. after unplug it. the installer works well. i am not sure how can i use my USB mouse after i finish it.
View 3 Replies View Relatedmy system stopped booting after recent update.When I select desktop it goes to splash screen an dies.Have to hit reset key.If I select nomodeset it boots fine excepts graphic resolution is 1280x1024 instead of 1680x1050.System is sandy bridge, Asus P8H67-M EVO, Intel Graphics enabled no other grapics cards, Suse 11.4 64 bit.I do my updates with zypper up.
View 9 Replies View Relatedi have a dual boot system set up right now through wubi. the installation went fine. but then i tried to upgrade ubuntu from 10.04.2 to 10.10. the update went fine, no errors. but afterwards when i restarted my computer and selected ubuntu, it said "error: file not found" it didn't even get to grub. this has happened numerous of times trying to upgrade in the past.
p.s: i have vista installed as the other side of the dual boot.
try to download mysql-serverPHP Code:apt-get install mysql-server but it seem to stop downloading this package at 5%Tried converting rpm to deb with alens still no luck..PHP Code:
alien -i --scriptsMySQL-server-5.1.45-1.glibc23.x86_64.rpm
error: incorrect format: unknown tag
chown: cannot access `MySQL-server-5.1.45//etc/my.cnf': No such file or directory
[code]....
I've installed previous Ubuntu and other linux distros in the past, so I have a fair idea what I'm doing.
I downloaded the official Ubuntu 10.10 ISO from Canononical, burned to CD and booted from that.
I chose to install, using an existing swap partition, and a freshly formatted (ext4) partition, with mount point "/" as root.
The installation runs fine up to where I enter my User, Computer and Login details.
The forward button to continue, remains greyed out, even tho the copying of files finishes and says down the bottom that I'm ready to go.
At this point, I can't exit, log out, or do a proper restart.
Only a forced reset of the computer gets me out of the installation.
No files get installed on the partition, but the MBR does get written to.
And obviously I get an error trying to boot to it.
I've tried this same procedure 3 times now, with exactly the same result each time.
I'm writing a download script, that will serve files for download and that has to log each download. I'd write something like this:
Code:
log_downlad($file_id, $user_id...);
$dl_path = $server_mount."/".$file_hash...;
[code]...
After installing recommended updates for Ubuntu, Ubuntu would no longer boot from Windows Boot Loader. It looks like an error about some missing NTFS4 files briefly flashes on the screen.
View 2 Replies View RelatedI can't install filezilla. I've searched and written the line (sorry can't emember what it was exactly) in terminal, but it didn't find filezilla. I then found another thread and tried writing as shown by aysiu in the screen grab. But, it got to 99% and then after ages said it couldn't finish (see screenshot).
View 9 Replies View RelatedI put together this 500+ page .pdf how-to, if your looking to setup a server, and manage it with Webmin. built on Debian, but should work here to for the most part[URL]..
View 9 Replies View RelatedWhen I try to connect UbuntuOne, it gives an error -"The process did not finish successfully."
View 6 Replies View Relatedlsusb shows this:
[code]...
I know the thing is there and Linux is able to identify it. However, using the drivers included with the device (rtl8192su_linux_2.6.0002.0707.2009) and later other drivers (rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20101111) and the firmware realtek package as well, Modprobe shows nothing. Also *tried* to follow instructions to the best of my ability from these sources:
[code]...
I am still running lenny 2.6 on a dell latitude d505 (circa 2006) running the x86 32-bit debian distro. The USB device is produced by Sabrent and contains the realtek 8191s IEEE 802.11N chipset. After all effort so far, my guess is that the 8192 drivers are not compatible with the 8191 chipset, but then why were they included with the device and why do the 8191 drivers still reference 8192?
how can I set it don't close automatically? I want it just stay there, and let me close it manully.
View 9 Replies View Relatedrubyripper starts ripping but then it seems it stops during the analyzation.No action noticable and it does not finish.The last message in the log is: analyzing the files for not matching chunks.I left it for hours and nothing happens.It happens with all formats and with all CD's I have.No error messages or other.With opensuse 11.2. there was no problem at all.
rubyripper version 0.6.0
Kernel: Linux 2.6.34-12-desktop x86_64
Distribution: openSUSE 11.3 (x86_64)
KDE: 4.4.4 (KDE 4.4.4) "release 7"
Does anybody have an idea or need any logfiles?A similar problem I have in k3b when ripping audio cd's. It hangs up during analyzation.