OpenSUSE Multimedia :: Rubyripper Does Not Analyze Files And Does Not Finish?
Aug 8, 2010
rubyripper starts ripping but then it seems it stops during the analyzation.No action noticable and it does not finish.The last message in the log is: analyzing the files for not matching chunks.I left it for hours and nothing happens.It happens with all formats and with all CD's I have.No error messages or other.With opensuse 11.2. there was no problem at all.
rubyripper version 0.6.0
Kernel: Linux 2.6.34-12-desktop x86_64
Distribution: openSUSE 11.3 (x86_64)
KDE: 4.4.4 (KDE 4.4.4) "release 7"
Does anybody have an idea or need any logfiles?A similar problem I have in k3b when ripping audio cd's. It hangs up during analyzation.
View 1 Replies
ADVERTISEMENT
Mar 9, 2010
I'm kind of frustrated about the CD ripping programs I've tried - one doesn't stop ripping at the end of the CD, the other one doesn't rip at all. In the past, I used to use Grip, which was perfectly fine, but it's no longer available for Ubuntu 9.10, so I had to move on to other programs. Since I cannot compile from source (tried a couple times in the past, always screwed up badly), SoundJuicer - which is supposed to be really great - is not an option for me (anybody aware of a deb?). Rubyripper looks great, but when I tell it to rip, it simply doesn't do nothing.
RipOff is more simple and basic. It rips, but a) only at, like, 2.3x speed (how can I speed it up?) and b) at the end of the CD, it just continues ripping and never finishes. I end up with e.g. a 5:30 minute OGG for a song that runs for 4:10 minutes. The song itself is perfectly fine and completely present, the OGG just goes on in silence for another minute afterwards. This happened twice so far. It just doesn't stop when the CD is over. How can I get a CD ripping software that does its job flawlessly?
View 1 Replies
View Related
Jan 23, 2011
I've been using the rubyripper gui on 10.04 for a while now, using my samsung se-so84 external dvd writer and I really like it. The problem is, I seem to have found that a small handful of my CDs will not rip at all. it says that it is ripping the first trial of the first track and never progresses past this. I check the files and the temporary .wav file. usually, when this file is created it is of size 44 bytes and increases to a number of MB in a matter of seconds. in the case of the albums that do not work, the file remains very small, all being 32KB, with the exception of one that is 64KB and another that remained 44 bytes. I check the log files and they all read:
Code:
STATUS
Starting to rip track 1, trial #1
Filesize is not correct! Trying another time
Starting to rip track 1, trial #1
However, this appears to be normal as I checked the log of an album that ripped correctly and it started with this.
So I tried using the command line mode and that didn't work either. the ouput was:
Code:
STATUS
Ripping progress (0 %)
Ripping track 1
Expected filesize for track 1 is 66389948 bytes.
and then it exits. in the directory, an empty temp folder has been created and the album's folder contains a log file that ends after STATUS. I tried using a CD that works on the gui and the command line did the same thing. could this be something to do with the incorrect filesize that the log showed for all CDs?
View 2 Replies
View Related
Jun 15, 2011
I loaded RubyRipper today so I can rip some music, but don't know where it went. I extracted it, but don'y know what to do now. If it is not a straightforward install, where I just click install and it does the rest, I am lost. What do I look for, and what do I do?
View 4 Replies
View Related
Jun 4, 2010
I have read several threads on the subject of installing rubyripper, and following the instructions seems to work for a while, but at the end of "sudo apt-get install rubyripper" or some variant like -gtk I get the return: "Couldn't find package rubyripper"
I have tried this through the Ubuntu software center, terminal, Synaptic, etc, and do not know anywhere else to go and look for it.
View 5 Replies
View Related
Jul 18, 2010
rubyripper is designed to be the EAC for linux and in this thread here mc4man very kindly gave me the other box encode line for mp3HD slightly modified to give a 320kbps on the lossy aspect of the file
Code:
mp3hdEncoder -br 320000 -if "%i" -of "%o".mp3 - -Title "%t" -Artist "%a" -Album "%b" -Track "%n" -Year "%y" -Genre "%g"
ALSO IMPORTANT
MAke sure you have Lame installed on your synaptic the encoding relies on it for the lossy part and make it executable ALSO make sure you go into the terminal enter mp3hdEncoder and ACCEPT the agreement now i am seeking the same information for 3 other formats.
View 9 Replies
View Related
Apr 26, 2010
I've been using rubyripper quite happily on Karmic, now I've moved to Lucid and discovered a bit of an issue. rubyripper will pause for several minutes between tracks with ruby 1.8. If I upgrade to ruby 1.9.1 the gui client won't run due to an issue with libgtk2-ruby not being available for 1.9.1.
The cli version of rubyripper under 1.9.1 is blazingly fast, so that is what I'm using at the moment, but I do prefer the gui.
Anyone have any insight into this? Googling suggests there may be a bug in ruby 1.8.7 that caused the long pauses, but it was supposed to have been fixed in 1.8.7.249 i.e. the default Lucid version.
View 8 Replies
View Related
Apr 6, 2010
how can I set it don't close automatically? I want it just stay there, and let me close it manully.
View 9 Replies
View Related
Apr 7, 2010
I need to know what this means and what to do to fix this. code...
View 9 Replies
View Related
Mar 17, 2011
I need a tool to analyse the output of sar command. just like sarg which analyses the log files for http , squid etc . I need a similar tool for sar output analysis.
View 3 Replies
View Related
Aug 17, 2011
We have seen with the release of Fedora 15, systemd is the new start-up services, which will replace SysVinit and Upstart on most Linux distributions. Here are some tips based on the order systemd-analyze, for analyzing the startup time of your OS.On commence avec l'option time, qui affiche le temps total de d�marrage de votre syst�me : (One starts with l' option time, which posts the total time of starting of your system: )
Code:
$ systemd-analyze time
Startup finished in 6385ms (kernel) + 3228ms (initrd) + 49335ms (userspace) = 58949ms
[code]....
View 3 Replies
View Related
Apr 15, 2011
For those with IT jobs, how do you handle security monitoring for your company?
1.How do you determine what to monitor-- The most vulnerable assets, most critical or something else?
2.What kind of data do you collect for security monitoring purposes?
3.What tools and techniques do you use to analyze the data?
View 6 Replies
View Related
Jun 18, 2011
I need to analyze the squid access log file for the purpose of my research.For that I need to obtain some correlation among time and the web site visited, machine ip and the web site name etc.It's better if I can draw a graph by analyzing the log file . I found some log analyzers but it didnt provide this.I need to obtain some cor-relation from this log file .
View 1 Replies
View Related
Nov 30, 2010
Does anybody know an application that sums up the printing from the page_log file and puts the summed amounts in another simple text file? Tried phpPrintAnalyzer but could not figure out how to set it up.
Running Ubuntu Hardy LTS server.
instructions on phpPrintAnalyzer?
View 2 Replies
View Related
Jan 26, 2010
I install squid-graph 3.2 need to know:
On analyze page have:
This mean! cache sending to my users as total object 84Mb? and proxy server sending object 52Mb which are not cached yet to the users?
View 3 Replies
View Related
Jun 11, 2010
I am facing customer issue. Customer has got core file while running the server. Customer had sent core file and details from pstack, pmap and pldd commands.
View 1 Replies
View Related
Jan 4, 2014
I have a problem for which I imagined a radical solution. Okay, I have a script that uses Alltray's "menu" feature as an interface. It's working greatly, EXCEPT sometimes lxpanel (the panel and tray of LXDE) has a hiccup and restarts, at which point the alltray menu is still running, but the icon is gone from the tray.
I want to somehow test the screen for the existence of a color, a color that is likely only to exist in the icon I've chosen for the chat menu. If the color exists on my screen, then the script can continue to do nothing, but if the color doesn't exist, then that means the alltray icon with my custom icon has disappeared, at which point I should have my bash script close the alltray process and start it again.
How to accomplish the checking of my screen for the existence of a particular color? To simplify, I already have simple screenshot scripts (scrot is good for it), so it would be fine if I could simply analyze an image.
View 6 Replies
View Related
Feb 5, 2011
I'm looking for an app that will analyze my system and report similar to device manager. I'm trying to find out what type of ram i have installed (ddr 266/300/400 pc 2700/3200) etc.
View 3 Replies
View Related
Jun 28, 2011
I am trying to make a script which will analyze jpeg images taken from a webcam. i can get a image easily enough but i can't figure out a way to get the images average brightness as a number.
View 1 Replies
View Related
Jul 1, 2011
Where I work we're trying to create a mailbox where our employees sends messages to it and the mail server processess them. Much like the Support of some companies where you send an email a ticket is automatically opened, but instead we need to save the messages to the filesystem depending upon an identified ID in the message.
We're considering two options:
1) Identify by to: header
Messages are sent to 12345@domain.com or os+12345@domain.com, where 12345 is out customer identifier, and the mail server processess messages and saves them to:
/data/os/12345/Customer contact.eml
2) Identify by subject: header
Messages are sent to os@domain.com and the customer identifier is specified in the subject [12345] Customer contact.
We need to do some other verifications as the user (from: header) is authorized to archive messages to that customer, but this is another story.
I tried searching for something along the line of AMaViS and ClamAV filters but had no success.
View 2 Replies
View Related
Apr 9, 2010
I need to learn how to analyze network traffic for attacks and while finding the attack seems easy in my case I need to identify what hes doing. I will be happy right now if you guys can answer my question. How to identify if an attack has brought the server down? I have packet captures of an attack in progress and I noticed that every now and then the attacker would do something weird and the server would start sending packets with just the RST packet sent in response. Normally I had been seeing the RST ACK flags set or the FIN ACK bits set to terminate a connection. So once again my question is how do I tell if the traffic indicates a server crash?
View 1 Replies
View Related
Sep 11, 2010
I am looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps) with ARM-based processor. We use Eclipse IDE and C++ lanuage for development. Does anybody have recommendation for tools to analyze code complexity? The tools is better to support McCabe complexity metric, however, we may also consider others. Does anybody have recommendation for unit testing?
View 1 Replies
View Related
Dec 1, 2009
OpenSUSE 11.2 ( KDE4 ), even with good, bad and ugly gstreamer plugins can not play MP3 and AVI.Have tried both, Amarok and Kaffeine - none of them worked.
View 4 Replies
View Related
Dec 17, 2009
My VLC used to play FLV files... but for some reason it stopped being able to play it. I can sort of play it with MPLAYER; but I preffer to use VLC.
View 8 Replies
View Related
Mar 28, 2010
I can't play MP3 files. I followed this guide:
Restricted formats - openSUSE
That didn't help, so I went with the 10 steps to check the multimedia. The output is here:
Code:
I'm using KDE on a fresh install of OpenSUSE 11.2 I notice there are some problems with that list, not all the output is as it should be according to the guide I followed. But I'm not sure how to proceed.
View 9 Replies
View Related
Apr 12, 2010
I was trying to listen to a radio station (download the asx file) but I cannot pay that file with any of my applications.
Could you recommend me some extensions to install in order to play that kind of files. Notice that the stream is wma formated.
I'm using openSUSE 11.2 with KDE.
View 9 Replies
View Related
May 9, 2010
Downloaded ten mp4 file (approx 200MB each) and tw0 flv (approx 400MB each) from open-yale and wanted to burn them as a DVD to view on the tv. Using openSUSE 11.2 and KDE4, 2MB ram on a desktop to do this task.
View 3 Replies
View Related
Jun 6, 2010
What do I need to do to get mp3 and m4a files working? Clicking the files opens the banshee media player but the files don't play.
View 9 Replies
View Related
Sep 15, 2011
I'm beginner of open suse 11.3. 64bit I cannot open mp3 files. Amarok is opening but it stops immediately. It can be connected with the installation problem. During installations some respositories for mp3 etc was stopping at 50% and repeating the cycle. So I think it's general problem, not Amarok.
View 4 Replies
View Related
Jan 6, 2010
I am trying to open some wmv files through firefox (opening in my gmail). When trying to open, the only selection I have is Banshee. When I download onto desktop, I can open it using mplayer.
View 9 Replies
View Related
