Red Hat :: Use USB Mouse After Finish Installation?
Apr 11, 2010i guess it is because my USB mouse. after unplug it. the installer works well. i am not sure how can i use my USB mouse after i finish it.
View 3 Repliesi guess it is because my USB mouse. after unplug it. the installer works well. i am not sure how can i use my USB mouse after i finish it.
View 3 RepliesI've installed previous Ubuntu and other linux distros in the past, so I have a fair idea what I'm doing.
I downloaded the official Ubuntu 10.10 ISO from Canononical, burned to CD and booted from that.
I chose to install, using an existing swap partition, and a freshly formatted (ext4) partition, with mount point "/" as root.
The installation runs fine up to where I enter my User, Computer and Login details.
The forward button to continue, remains greyed out, even tho the copying of files finishes and says down the bottom that I'm ready to go.
At this point, I can't exit, log out, or do a proper restart.
Only a forced reset of the computer gets me out of the installation.
No files get installed on the partition, but the MBR does get written to.
And obviously I get an error trying to boot to it.
I've tried this same procedure 3 times now, with exactly the same result each time.
how can I set it don't close automatically? I want it just stay there, and let me close it manully.
View 9 Replies View RelatedI am not able to finish the last step in the installation of Ubuntu 10.10. It asks me to fill in "Who are you?" information, but the forward button is not activated and I am not able to click it. I have tried to burn a new image cd and try again but I get the same error. My computer is an Acer Aspire 5220. I attach a picture of the screen.
View 3 Replies View Relatedwhile upgrading to Lucid, I got the following error:
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/dbus_1.2.16-2ubuntu4_i386.deb (--unpack):
unable to open '/lib/dbus-1.0/dbus-daemon-launch-helper.dpkg-new': No such file or directory I tried to just add the dpkg-new extension to the existing /lib/dbus-1.0/dbus-daemon-launch-helper - to no avail. How can I finish installing dbus?
why i can't finish instalation? it shows this message...
In file included from /usr/include/fcntl.h:217,
from ../gnulib-lib/fcntl.h:27,
from write-catalog.c:25:
[code]....
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies View Relatedtry to download mysql-serverPHP Code:apt-get install mysql-server but it seem to stop downloading this package at 5%Tried converting rpm to deb with alens still no luck..PHP Code:
alien -i --scriptsMySQL-server-5.1.45-1.glibc23.x86_64.rpm
error: incorrect format: unknown tag
chown: cannot access `MySQL-server-5.1.45//etc/my.cnf': No such file or directory
[code]....
I'm writing a download script, that will serve files for download and that has to log each download. I'd write something like this:
Code:
log_downlad($file_id, $user_id...);
$dl_path = $server_mount."/".$file_hash...;
[code]...
i just installed fedora 13(fresh install) everything worked fine so i wanted to install the nvidia drivers (using akmod) everything went fine so i rebooted it. It started fine showing everything as[ OK ]But after showingEnabling monthly Smolt checkin: [ OK ]Starting atd: [ OK ]It stops rigth there...I dont know why, i just can reboot and cant go any furtherThe next one must be service local, but cant get it started
View 3 Replies View RelatedI can't install filezilla. I've searched and written the line (sorry can't emember what it was exactly) in terminal, but it didn't find filezilla. I then found another thread and tried writing as shown by aysiu in the screen grab. But, it got to 99% and then after ages said it couldn't finish (see screenshot).
View 9 Replies View RelatedI put together this 500+ page .pdf how-to, if your looking to setup a server, and manage it with Webmin. built on Debian, but should work here to for the most part[URL]..
View 9 Replies View RelatedEver since I installed Maverick Update Manager it hangs when I update and I eventually have to kill it.
View 3 Replies View RelatedWhen I try to connect UbuntuOne, it gives an error -"The process did not finish successfully."
View 6 Replies View Relatedlsusb shows this:
[code]...
I know the thing is there and Linux is able to identify it. However, using the drivers included with the device (rtl8192su_linux_2.6.0002.0707.2009) and later other drivers (rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20101111) and the firmware realtek package as well, Modprobe shows nothing. Also *tried* to follow instructions to the best of my ability from these sources:
[code]...
I am still running lenny 2.6 on a dell latitude d505 (circa 2006) running the x86 32-bit debian distro. The USB device is produced by Sabrent and contains the realtek 8191s IEEE 802.11N chipset. After all effort so far, my guess is that the 8192 drivers are not compatible with the 8191 chipset, but then why were they included with the device and why do the 8191 drivers still reference 8192?
rubyripper starts ripping but then it seems it stops during the analyzation.No action noticable and it does not finish.The last message in the log is: analyzing the files for not matching chunks.I left it for hours and nothing happens.It happens with all formats and with all CD's I have.No error messages or other.With opensuse 11.2. there was no problem at all.
rubyripper version 0.6.0
Kernel: Linux 2.6.34-12-desktop x86_64
Distribution: openSUSE 11.3 (x86_64)
KDE: 4.4.4 (KDE 4.4.4) "release 7"
Does anybody have an idea or need any logfiles?A similar problem I have in k3b when ripping audio cd's. It hangs up during analyzation.
When installing build-essential and ubuntu-restricted-extras the internet connection was interrupted. How can I force re-installation in terminal? I'm looking all over for the commands but I can't find them. If i just type "sudo apt-get install build-essential ubuntu-restricted-extras" it returns the message that they are both up to date. I know one of them was interrupted and needs to be finished.
View 1 Replies View RelatedI'm trying to find out which hard drive my vista installation is labeled in ubuntu so I can finish editing the grub menu.1st file.
All it says on the sourceforge page is
Quote:
Root - You likely have something along these lines "(hd0,1)". "hd0" refers to the your hard drive while 1 points to the partition. Note that for GRUB, partitions start at 0 and not 1. for example 0=Partition 1, 1=Partition 2 and so on.
It doesn't say how I can find out which one my vista is. So I need to know what my hard drive is in linux. Is it hd0,1 or hd0 or what?
After some hours of googling, I've managed to increase the size of the default ramdisks (/dev/ram0-16) to 1 GiB each, I raided them together with mdadm to try it out, then created a filesyste, mounted it etc etc. No problems. The problem comes when I used gparted to move my windows partition over and in the unallocated space (1 GiB), I created an unformatted partition (/dev/sda2)Now when I try to create the raid array I get the following:
Code:
:~$ sudo mdadm --create /dev/md0 -l 1 -n 2 /dev/ram0 /dev/sda2
mdadm: Cannot open /dev/sda2: Device or resource busy
[code]....
I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.
I'm not sure if this problem extends to other wifi networks or just the one at my office.
My skill in fedora linux is all acquired by reading online and trial and error. I manage to set up my squid 3.0 proxy server in fedora 11. It is working smoothly as I wanted it to be. I have one client who is running bittorrent that drags all the bandwidth of our network.The problem is I cant make my server work tranparently. I want to make transparent proxy so that it can support my wireless router and I want to control the bandwidth to a fair level for everyone without them knowing.
Please somebody help me configure iptables in step by step, specifically in fedora 11. And all other necessary configuration needed to run my transparent squid 3.0 proxy in fedora 11.I know there's a lot of Linux Genius here that can help. Please help me I needed it badly.
I am having some problems with rsync,I put the rsync command in a shell script, and I am calling the shell from a 3rd server, but it stops midway through.s anyone else experienced these problems?
View 3 Replies View RelatedI've spent all day trying to sort this out and I'm beginning to think this problem is specific to a Mac because I've managed to build this extension just fine on a debian vpsI'm trying to build the PECL extension amfext.I download the source to a folder and run the following:
Code:
sudo phpize --clean
sudo phpize
[code]...
I have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:
One or more of the mounts listed in /etc/fstab cannot yet be mounted
/: waiting for /dev/loop0
/tmp: waiting for (null)
/boot: waiting for /host/ubuntu/disks/boot
Press ESC to enter a recovery shell
I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.
One of the hard drives in my server failed the other day, backups saved the day and downtime was only a few hours, but when setting up the new drive I went ahead and migrated to software RAID, in the hopes it may give me less downtime in the future when a drive fails. It all went rather well, but my main root partition won't finish syncing for some reason.
sda was the original drive with sda4 as /, sda1 as /boot, and sda2 as swap. sdb was the drive that failed and was replaced with the new drive. So I set up sdb with the same partitions of sda, added it to a RAID1 array, copied files from sda, and reboot to md4 as /, md1 as /boot, and md2 as swap. I added the sda partitions to the array, and the sync went off without a hitch on md1 and md2, md4 progresses well, but after a few hours /proc/mdstat just shows this:
Code:
root@d668:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md2 : active raid1 sdb2[1] sda2[0]
9767424 blocks [2/2] [UU]
[Code]...
I just installed the new 2.6.27.5-37.fc9.x86_64 kernel from the updates-newkey repository, and I've discovered that the new kernel boots much slower than the 2.6.26 kernel and requires manual intervention to complete the boot sequence on my laptop.
Details:
1) My laptop is a HP dv9708us with 17" AMD Turion dual core 64bit system, 3Gb memory, two SATA drives. One drive (a Fujitsu 160Gb) was installed by HP, and I added a second (a Hitachi 320Gb) drive in the empty secondary drive bay.
2) I have Fedora installed on the secondary drive, but I boot from GRUB using the Kubuntu /boot directory on the first drive. I do that because GRUB cannot properly access the secondary drive. (GRUB reports (hd1) as avilable, but can't "see" any partitions on it.)
3) When the 2.6.26 kernel is booted, the ATA driver produces several messages about the secondary drive being "frozen" untill it reduces the access speed from 3Gb/sec to 1.5Gb/sec. Thereafter it works normally. (I asked in http://www.linuxquestions.org/questi...to-fix-678903/ how to fix this, but received no replies.)
4) When I boot the new 2.6.27 kernel, the boot hangs for a minute or so for each attached USB device and then appears to hang completely while trying to access the secondary ATA drive. The manual intervention that resolves the problem is to repeatedly push the "control" key, which will cause the ATA error messages, seen with the older kernel, to be displayed and the boot to finish.
5) Even with the manual intervention, the boot process requires about five minutes to complete. This is considerably slower then the boot time required by the 2.6.26 kernel on the same hardware.
6) Without the manual intervention the boot process had not completed during the time it took me to shower, shave, and get dressed this morning - about 45 minutes.
relative n00b to C++ but I have heard that KDevelop rocks so I am using it as my IDE. what does it mean when it wants me to find a cmake file? idk what that is lol, just got through the section on if statements on my book. where do i find this file? are there any good tutorials on the KDevelop4 Enviroment?
Charlie
I've been using banshee for a about a week, but it has recently started closing abruptly whenever it needs to play the next track. It will happily load the first track, and it is possible to play songs by selecting them, but allowing a song to finish, pressing next, previous or stop track causes it to crash.I am running natty 11.04 and banshee 2.0.0This is the output of banshee --debug. I pressed the next button within the player.
Code:
[1 Debug 10:19:45.509] Initializing GTK
[1 Debug 10:19:46.955] Post-Initializing GTK
[code]...
Sorry title should have been F13 installation without internet I am having a P4, 1GB ram, 80 GB machine. Since yesterday I am having some funny issues on this machine. i have fedora 12 installed on this machine.
My mouse suddenly stop working, or the cursor changes from pointer type to a line cursor and basicaly the mouse just stops clicking. I am plannning to install fedora 13 on this machine. Have downloaded the 5 iso (
CD images).
Would choosing the option upgrade on existing Linux partition do the job? Is there a chance I loose my data files when the upgrade is done? I dont want to reinstall programs like java, eclipse, tomcat etc that I done in fedora 12. I only intend using the CD's as I dont have a lot of bandwidth and a fast internet connection to use yum.
I just write a script that check some thing. and I use
Code:
read -p " enter : " chk
it executed. but if a user use "Enter key" on keyboard it cant continue and finish.