Ubuntu Installation :: Error: File Not Found When Booting After 10.10 Update
Mar 22, 2011
i have a dual boot system set up right now through wubi. the installation went fine. but then i tried to upgrade ubuntu from 10.04.2 to 10.10. the update went fine, no errors. but afterwards when i restarted my computer and selected ubuntu, it said "error: file not found" it didn't even get to grub. this has happened numerous of times trying to upgrade in the past.
p.s: i have vista installed as the other side of the dual boot.
View 4 Replies
ADVERTISEMENT
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Jan 21, 2011
I have installed Red Hat Linux 5 and using it. But when I uninstalled one package and booting after that, I got the following error
Error 15 : file not found
View 6 Replies
View Related
Oct 12, 2014
ERROR: No configuration file found
No Default or UI configuration directive found!
boot:_
This appears when I try to boot Debian 7.6.0 from my USB drive
View 1 Replies
View Related
Oct 22, 2010
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
View 9 Replies
View Related
Mar 16, 2011
Could not download all repository indexes
The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
Failed to fetch url 404 Not Found
Some index files failed to download, they have been ignored, or old ones used instead.
Im using 10.04.
Connection is fine. Maybe something wrong with server or any of my repository
View 7 Replies
View Related
Oct 24, 2010
Iv been using ubuntu on my laptop for just over a year now and thought it about time my desktop got the same. I cant get rid of the vista section of the disk because of things i have on there so a friend gave me a spare 80gb hard drive to have a play with it and go from there. So first of all installed unbuntu 10.10 on the hard drive alls fine i can boot into both vista and ubuntu, i then want to install backtrack 4, so i booted the backtrack disc and off we went, i split the 80gb hard drive in two and installed backtrack to one section, now i cant boot to anything other than backtrack. I got an option for ubuntu although this does look different now (showing up as 'ubuntu, with linux 2.6.35-22-generic-pae') when i go to this option i get the message "error 15:file not found" I also have the option for other operating system, i get this message when i choose this option "error 11: Unrecognized device string"
View 1 Replies
View Related
May 4, 2010
note: acct and acct2 are not the actual account names. I spent a long time figuring out this ubuntu problem on my own and decided to share it with the ubuntu users out there. I will give a summary of what had happened and what I had done to resolve it. I did a lot of complicated account password changing as well. I wanted to get rid of the login keyring thing.
I had tried messing around with some of ubuntu's settings when I first installed 10.04 Lucid Lynx. I changed settings in: System>>Administration>>Users and Groups, and System>>Administration>>Login Screen. I got terrible results, but ended up solving it on my own. The first account I had was named "acct". I had an issue with the keyring always needing to be unlocked, meaning I had to type in a password twice. I did not like this. So I decided, why not delete this "acct" account and make a new one that I can use?
I made a second user account called "acct2". I messed around a lot with the settings, just to see what would happen and what would work. I tried to cut out some of the files that were in the other account, the account "acct", while I was in user account "acct2". I could not because I did not have the rights to do it.
I realized I had to change those files to shared. I logged back into the other account "acct", which was an administrator account. I made them all shared files. Next, I went back into acct2, then cut all the files out of acct that I needed, then I deleted the home folder for acct. This is probably where the problems all started. I always start with the purple screen and have no choice to log into my usable acct2 account and have to wait 7 minutes to get that option to do so. When I rebooted, the screen popped up a couple windows reporting errors to me:
[Code]...
View 1 Replies
View Related
May 21, 2010
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies
View Related
Nov 2, 2010
Have a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
View 9 Replies
View Related
Apr 7, 2011
I'd like to install Ubuntu 10.10 in my laptop. So, I downloaded the iso file and burned into CD. I'd like to install into D drive since I use Windows Vista in C drive.
Below is the specification of my laptop.
Mobile AMD processor 2 G HZ, 1G RAM 32-bit Windows Vista Home basic
Harddisk C : 46 G (18giga free), D : 10 G (10giga free) How can I make partition and where should I start with, either Beginning or End of existing partition? SWAP? I watched a few videos but stlll can't grasp clearly how to do. I tried to boot w/ Live CD. But I didn't see the 4 different options: Try out without installing, Memory test, Ubuntu Disk test, Install Ubuntu, and Booting w/ harddisk. I had only 2 options; Try out w/o installing, Installing. Why is it so?
In addition, while booting w/ Live CD, I saw a message as following:
Error: b43.../firmware file not found.. something like this.. it was too fast to catch! However, I went on and show its desktop screen. May I not be able to install in my laptop? Does my laptop have any faulty disk or memory? I wonder. Finally, I use Wireless connection in the library so when I boot with Live CD, then internet is disconnected. Should I need to be connected before installing?
View 3 Replies
View Related
Aug 11, 2011
I've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
View 3 Replies
View Related
Apr 5, 2010
Have searched around the web and here but can't find what package to load to solve the problem. Running 9.10
View 4 Replies
View Related
Aug 25, 2011
If i compile my.tex file using the command:latex my.tex I am getting this error:! LaTeX Error: File `pause.sty' not found.Type X to quit or <RETURN> to proceed,or enter new name. (Default extension: sty)
View 1 Replies
View Related
May 24, 2011
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
View 1 Replies
View Related
Oct 27, 2009
I am getting a message at my first re-boot after install of "Error 15: File Not Found", and that's as far as it goes. I just installed Fedora 11 on a Drive that I had recently ran Ubuntu 9.04. I did re-partition and format the drive. I am also running Win XP Pro on another drive, and can boot from either. The computer is older, but all the hardware seemed to work fine with Ubuntu and altough I had to format the install drive a couple times the installation seemed to go ok.
View 4 Replies
View Related
Jan 7, 2011
After preupgrading without problems, I did not reboot the computer inmediatly. I was surprised that, although preupgrade had finished, the terminal window was yet active and I closed it. On reboot, in the Grub window, one of the options is "Actualizar a (upgrade to) Fedora 14". If I select it I get: "Booting 'Actualizar a Fedora 14 (Laughlin)'
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=02f7302b-aa56-4c33-b533- fa1549aa0860:/upgrade/ks.cfg stage2=hd:UUID=02f7302b-aa56-4c33-b533-fa1549aa0860:/upgrade/install.img initrd /upgrade/initrd.img
Error 15: File not found
Press any key to continue....."
and pressing a key it returns to the Grub window. The /upgrade directory doesn't exist, but it does the /boot/upgrade where the vmlinuz is. uninstall and reinstall the preupgrade, rebooting inmediatly, but I don't know how to uninstall and if this is the solution. How can I uninstall the preupgrade?
View 12 Replies
View Related
Jul 3, 2010
I have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
View 2 Replies
View Related
Nov 16, 2010
Decided I'd like to take a look at OpenSUSE and installed onto my desktop. Already successfully dual booting Ubuntu 10.10 and Windows XP (which I keep purely for iTunes). When I start the PC the Ubuntu grub menu showing Ubuntu and Windows options has been replaced by a Suse-branded screen showing something that looks (to my untrained eye) like a grub menu. Ubuntu and Suse are listed. If I select Ubuntu I am shown a dos screen with "Error 15: file not found". I am then taken to the old Ubuntu grub screen but trying to boot Ubuntu from that menu returns the same error. I know all the data is still there - I can mount the drive in Suse and view all my documents.
I have searched the forums and tried to follow some of the instructions given in response to similar threads but I'm afraid I didn't get very far. Please assume that I have NO PRIOR KNOWLEDGE of Linux! I really know nothing about it and am only just getting to grips with basic terminal commands. Goodness knows why I thought OpenSUSE would be a good idea... I found instructions for running Boot Info Script and these are the results:
[Code].....
View 1 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Jun 14, 2010
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
View 4 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Apr 5, 2010
I had a windows 7 professional on my computer. I tried dual booting it with ubuntu. While installing ubuntu when it asks which partition you want to install it "as it said your all data in the partition would be erased but not before you confirm" so I selected go back and aborted installation because I didn't wanted that and bang I start my system again an I get this error "no boot device found". I ran my hard disk test it say's passed so I don't think my hard disk is corrupted. I tried using windows 7 recovery disc but I guess it doesn't even detects a operating system on my laptop. I got no back up of my data. Any way to get back my data if I cant get windows back!
View 8 Replies
View Related
May 13, 2011
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 1 Replies
View Related
Mar 15, 2010
I am having issues booting my LFS system on my hp nc8230 notebook running LFS SVN. Grub was built and installed per the book. My file system is almost as simple as it gets:
/dev/sda1 is swap
/dev/sda2 is my LFS partition /
The LFS live cd still uses the now deprecated drivers for HDD's thus as far as the livecd is concerned my block devices is (hd0) and /dev/hda2 for the root respectively. However the kernel to be booted runs on the newer drivers thus on boot my block device should be referenced as /dev/sda2 for the root. Grub is in fact installed on the MBR what happens is right when my system boots I get a file not found error the grub CFG is pointing to the correct block device and root partition from what can be seen by looking at the grub.
View 2 Replies
View Related
Apr 19, 2010
I just installed Fedora Core 12 and when attempting use the update utility am receiving the following error:
[code]...
View 3 Replies
View Related
Dec 20, 2009
while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies
View Related
Apr 20, 2011
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies
View Related
Oct 16, 2010
From the start ive been using ubuntu .and now im using lucid 10.04, what I see when I turn on update the multiverse and universe and the others, what I found is, Error. Here are the error from my terminal . It just annoys me, for now, I don't have any problem with any of it yet, and I don't want to have one.
Code:
adib@adib-desktop:~$ sudo apt-get update
[sudo] password for adib:
[Code]...
View 9 Replies
View Related
Feb 5, 2011
While I am trying to install updates following error is displayed
W:Failed to fetch url 404 Not Found
, W:Failed to fetch url 404 Not Found
, E:Some index files failed to download, they have been ignored, or old ones used instead.
My internet conection is good, I've installed some updates months ago.
View 2 Replies
View Related
