After installing recommended updates for Ubuntu, Ubuntu would no longer boot from Windows Boot Loader. It looks like an error about some missing NTFS4 files briefly flashes on the screen.
View 2 RepliesI installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View RelatedCan I separately install a third party boot loader which can boot both Windows and Linux (Ubuntu) . I want to use a boot loader other than the boot loaders which come with these operating systems. I am trying this out of curiosity.
View 4 Replies View RelatedI have triple booted Windows XP (195 GB)partition 0? the second partition is Windows 7 (195 GB)And the rest of a 1TB hard drive went to Open Suse 11.3. if it makes any difference I used g parted to create the three partitions and made them all primary. My problem is I want to change the way they all get along. When I boot up, I get the options;
Desktop -- openSUSE 11.3-2.6.34-12
Failsafe -- openSUSE 11.3-2.6.34-12
windows 1
windows 2
which is fine, but clicking on windows 1 takes me to the windows boot loader with the options of windows 7, or previous version of windows. clicking on windows 2 brings up a screen telling me " rootnoverify (hd0,1) chainloader +1 BOOTMGR is missing press ctrl+alt+del to restart" I would like the end result to be windows 1=XP,windows 2=7, then I can rename them accordingly. one more thing, when I installed openSUSE, I let it automatically configure the hard drive and create the necessary partitions(it deleted partition 3 first). i remember it saying somewhere that the boot manager was past the 125 GB limit, and might not boot.
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7)
500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
I recently installed Win 7 in a 4 partition hardrive. sda1 was some recovery partition. sda2 said "System Reserved". sda3 was my ext4 ubuntu partition. sda4 was my win7 partition. When I installed win7 I could only boot to win7 so I got onto ubuntu's tut for recovering grub and I attempted to recover it and I think I failed. When I boot I just go to a black screen. I since then deleted my sda1 & sda2 partitions (I really hope system reserved was not needed.) I'm still not 100% sure how the bios knows to boot straight to grub when it boots. What is the first thing on the hard drive that a bios looks for?? Anyways, the only access I have to a functioning comp is through a 10.04 live cd.
View 2 Replies View RelatedComputer StatisticsiMac (Model No. A1225) Dual Boots Mac OS X Partition Layout/dev/sda1 = EFI /dev/sda2 = Macintosh HD (HFS Format with Journaling) Free Space (32 GB) I had the linux installation program automatically partition the free space into three partitions. I forget what they were, but I know they are correct.
I tried doing a rescue installation, and reinstalled it many times with different settings. I even tried a manual partition according to instructions from the internet and reinstalling the grub boot-loader onto different partitions. I have reinstalled it at least 5 times!
I have a system with 2 hard drives. One drive (D) is my Ubuntu 10.04 system and the other drive (C) is my Windows XP system.
When I boot, I get BIOS then GRUB. If I choose the XP selection I am taken to a Boot Loader that now longer works. I get an error saying: "Windows could not start because the following file is missing. <windows root> system32hal.dll Please reinstall a copy of the above file.
Can I remove the boot loader and let Grub take me directly to the C:/windows? If so how?
i successfully install backtrack 3 but i cant see windows option anywhere in my lilo boot loader
View 10 Replies View RelatedI am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View Relatedso after my upgrade to 10.04 I'm experiencing a puzzling problem with Grub2. It can load everything fine except for XP. I have XP on a separate partition, it is detecting fine and the grub.cfg file is created withou a problem when I the appropriate commands to update and upgrade grub. What happens is that I select Windows XP from the list and it goes to a black screen where a cursor in the top left corner blinks 3-5 times and then immediately kicks me back to the Grub menu. I can do this forever but the grub menu just gets reloaded every time. Any ideas?
Here is the windows portion of my Grub.cfg:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda2)" {
insmod ntfs
[code]...
Here is my boot.ini on the ntfs partion I am trying to boot into
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)WINDOW S
[code]...
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI am running Ubuntu 10.10. Normally when I boot, I get the choice to run Ubuntu or the Windows loader, where I choose between 7 or XP. I have just noticed that when I boot now, I do not have the choice of going into windows. This has happened on two of my PC's just in the last few days. I assume one of the updates has overwritten the grub configuration file as I still get the grub menu but not the windows option. I have tried sudo update-grub but this did not solve the problem.
View 9 Replies View RelatedI'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
View 4 Replies View RelatedI just ran yum update, which installed about 47 packages. When I try to restart, the Linux boot loader is not being read. Apparently, the old Windows 7 boot loader that came installed on this machine is still somewhat intact on the hard drive, because when it boots, it tries to start Windows. I put in a Red Hat 5 rescue disk...but the rescue disk can't find a Linux file system on my hard drive.
Fedora 13
Dell Latitude E6500
Also...the disk is encrypted.
(Not the swap or /boot)
I'm running Suse 9 service pack 2. I have the recovery cd in the system and have issued the following command /sbin/mkinitrd -m "reiserfs aacraid mptscsih jbd ext3" -b /tmp/kevin/boot -d /dev/sda2
They system responded with : Root Device: /dev/sda2 (mounted on / as reiserfs) Module List: reiserfs aacraid mptscsih jbd ext3 You may have to update your boot loader configuration QUESTION: How do I update the boot loader from the where I am now?
Note: the reason that I need the bott information is because during maintenance the module reiserfs was left out the kernel file when the a previous mkiniterd command was issued cuasing /dev/sda2 not to mount and the system to go into a kernel panic.
I have 2 HDDs:
HDD 1 (sda) with Windows XP installed on sda1 and four more partions.
HDD 2 (sdb) with three NTFS-Partitions (sdb1, 5 and 6) and Ubuntu 10.04 (sdb7) + Swap-Partition (sdb8).
I would like to boot Ubuntu using the Windows XP boot loader, i.e., having an entry there to choose Ubuntu and start my installation of Ubuntu 10.04. I have installed Ubuntu 10.04 on sdb7 and told the installer to install the grub2 boot loader to /dev/sdb (should it have been /dev/sdb7?). When using the boot selection option of my bios and choosing the second HDD Ubuntu starts without problems.
I used dd if=/dev/sdb of=bootsect.lnx bs=512 count=1 to copy the mbr of my second HDD and copied the file bootsect.lnx to my c: drive. Then added C:ootsect.lnk = "Ubuntu Linux" to my Windows boot.ini. When rebooting my computer I get the option "Ubuntu Linux" in the XP boot loader. Choosing it I come to a black screen with a blinking white cursor. All I want to do is not use Grub 2 as my primary boot loader but instead leave my WinXP installation untouched and start Ubuntu from within WinXP boot loader. This has been working just fine with my old Ubuntu installation.
i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
View 2 Replies View RelatedI have Windows 7 on my machine right now but want to dual boot with either Ubuntu or another Win OS.....is there a way to dual boot with ubuntu and keep my windows boot loader or do I need to have grub?
View 5 Replies View RelatedI installed Ubuntu 10.10 64 on a Compaq CQ60 laptop on a 60 gig partition with a 3 gig swap partition. I'm running windows 7 64bit ultimate on the main partition. I installed off a live disc and Ubuntu works and runs great(except for wifi >.<).
My problem is ever since I installed Ubuntu Windows wont load every time. About half the time I select Windows 7 in the boot loader and it pulls up the windows screen with the stupid little flag, and then resets itself.
There where no problems with Windows 7 prior to the install. I've read that if you didn't reset your computer after shrinking your drive in windows it will cause problems later. But I did that so I cant think of any other explanation for why it would continually crash. Has anybody else had this issue, is this something that might be repaired by removing Ubuntu and the partition and reinstalling it?
I installed Ubuntu 11.04 64-Bit via Wubi but it seems that when I turn on my machine I first get the Windows Boot Loader, when I select Ubuntu from the list it then goes into GRUB with the option to select Ubuntu or Windows. Is there any way to change this so only GRUB is used?
View 3 Replies View RelatedI have Linux Mint and Windows 7 installed on my laptop, and recently tried tinkering with EasyBCD, to use the Windows multi-boot loader instead of grub. Well, that didn't work out too well, because I ended up with the Windows boot loader with two options, Windows 7 and Linux Mint, however the Linux Mint entry just redirected me to grub, which wasn't what I intended.
I tried to put things the way they were, with grub as the only boot loader, and figured I'd do so by setting EasyBCD to skip the multi boot screen and going straight to the Linux Mint entry, which corresponds to grub.Well, now when I boot, I get the grub screen, but if I select the Windows 7 entry, it just redirects me back to grub, so I can't access Windows 7 right now. What can I do to fix this? Can I edit the Windows boot loader from within Linux?
I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing
Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
I installed Ubuntu using Wubi, and the boot loader does not detect my keyboard. Does the windows boot loader only support PS2 keyboards? Would there be a workaround... like install DOS drivers for it? I have a logitech s520 keyboard.
When in Windows, I can select what OS to use, but is there a way I can select which OS to use while booted into Ubuntu? Is there a program that will let me modify the windows boot loader from within Ubuntu?
I recently installed ubuntu 9.10 32 bit using live cd onto a recently new Dell machine with windows7.
Everything was fine for a couple of weeks, but last night I got the error code...
Looking into the forums, I see that maybe I need to re-install grub 2. When I started probing using fdisk, I saw that the boot partition was my windows partition. So, I thought I would ask to find out if this looks right before I start making things worse code...
[URL](where loading into Windows corrupts the MBR). None of the solutions in the bug thread work for me, however--I'm on a Dell system (so it's not HP tools) and I'm not running PC Angel or any similar service (I checked). I assume it is related to the Dell recovery partition, though my old laptop from Dell didn't have this problem even though it also had a recovery partition.
However, before I had partitioned and set up Ubuntu on my new laptop, I installed Wubi (for transferring over the files from my old laptop because I didn't have time to do a full install and deal with problems like this one). Wubi worked fine using the Windows Boot Loader. I understand that WBL isn't capable of loading Linux on its own, which is why I was wondering if it was possible to have GRUB installed on a separate boot partition (not the MBR) and loaded from Windows Boot Loader. All of the information I could find on it didn't work with Windows 7--but again, I know Wubi was capable of doing it. how to set this configuration up?
Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.
My question is...is this a problem? it seems to work fine but i dont want to have problems later on.
I am user of ubuntu 10.10 beta version. I installed windows 7 on ubuntu but after that ubuntu doesnt boot up! Somebody please help me.I have ubuntu 10.10 live cd for 32 bit desktop edition.I want to rescue this problem.
View 2 Replies View RelatedI tried to install linux on hard disk and it installed without any problem. However, when i boot i directly get the windows boot loader screen and no grub screen. I reinstalled linux. I tried to fix grub, but still no grub screen.
View 4 Replies View Related