Ubuntu One :: Error - The Process Did Not Finish Successfully

Apr 25, 2011

When I try to connect UbuntuOne, it gives an error -"The process did not finish successfully."

View 6 Replies


ADVERTISEMENT

Ubuntu :: Connection Interrupted During Install - How To Finish Process

Jun 11, 2010

When installing build-essential and ubuntu-restricted-extras the internet connection was interrupted. How can I force re-installation in terminal? I'm looking all over for the commands but I can't find them. If i just type "sudo apt-get install build-essential ubuntu-restricted-extras" it returns the message that they are both up to date. I know one of them was interrupted and needs to be finished.

View 1 Replies View Related

Ubuntu Installation :: DBus Error - No Such File Or Directory - Finish Install?

Apr 29, 2010

while upgrading to Lucid, I got the following error:

dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/dbus_1.2.16-2ubuntu4_i386.deb (--unpack):

unable to open '/lib/dbus-1.0/dbus-daemon-launch-helper.dpkg-new': No such file or directory I tried to just add the dpkg-new extension to the existing /lib/dbus-1.0/dbus-daemon-launch-helper - to no avail. How can I finish installing dbus?

View 1 Replies View Related

General :: Unable To Successfully Start A KDE Session(SLAX), Check Out The Error?

May 1, 2010

I'm not able to successfully start a KDE session(SLAX), check out the error, Code: xauth: creating new authority file /root/.serverauth.7378

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0

[code]....

View 9 Replies View Related

Software :: Not Getting Prompted To Install Packages - Error "Failed To Authenticate" And Doesn't Finish

Apr 18, 2010

Yesterday after trying to remove KDE and noticing that it started removing a bunch of Gnome packages as well, I've managed to fix most of the damage. I still have one thing left. To install a .rpm package I have to do it via command line as root. If I try just double clicking it now it doesn't prompt me for the root password, then it just says, "Failed to authenticate" and doesn't finish. Also I used to be able to scale the frequency of my CPUs with the applets on the Gnome panel. When I would select a different frequency it would prompt me for the root password, then change accordingly. Now when I click it nothing happens. Can somebody tell me if there's a gconf setting or a package that was removed that could cause this?

View 2 Replies View Related

Ubuntu Installation :: Installed Successfully But Now "error:no Such Partition, Grub Rescue"

Dec 2, 2010

I'm a complete newbie, trying to get away from Windows Vista! I had some issues installing Ubuntu, but finally got it sorted - so I thought. I wanted to view a dnl file, so tried to boot into Windows, and I got a white screen with big red letters saying "ERROR". So I held down the off button for 5 seconds, and then tried to reboot. But now all I get is the words:

error: no such partition
grub rescue>

Before I go further, I'll summarise the problem with my install. Basically it would only get partway through, if at all, and then all the options would freeze...I could move the mouse, but that was it. Similarly with running Ubuntu on the LiveCD. After a lot of hassle, and some helpful members of the community, it turned out that all I needed to do was use the option "nomodest" when installing, and it all went fine. Well actually I had to retry it again in recovery mode because I think maybe a driver wasn't loaded (?), but after that everything seemed alright. So as mentioned before, I've come to my present issue. Typing "Is" gives "Unknown command" (or maybe "invalid"...I can't remember). And if I type "set" I get something like "prefix=..." and something else...sorry I can't remember and I don't want to turn off the computer now just in case things don't work again.

Anyway I managed to boot and run Ubuntu using the LiveCD, and started looking for solutions. Note that I used the "nomodest" option again to boot. Anyway all the solutions involve first using "fdisk -l" to find the partitions. Here is the output:

[Code]....

View 7 Replies View Related

Ubuntu :: Error "grub-mkconfig Not Successfully Completed..login As Root"

Jun 20, 2011

i have ubuntu 11.04 natty OS running on my laptop.i customize splash images using grub customizer but now its not working with error "grub-mkconfig not successfully completed..login as root".

View 9 Replies View Related

Ubuntu :: Error - E - Sub-process /usr/bin/dpkg Returned An Error Code - 1

May 9, 2011

I have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:

E: Sub-process /usr/bin/dpkg returned an error code (1)

I wonder what is the meaning of the error.

View 3 Replies View Related

General :: Error : There Was An Error Setting Up Inter-process Communications For KDE

Mar 5, 2010

I've been using Kate for a while without any problems.

However, today I tried to install Kedit.

Then I got this message:

"There was an error setting up inter-process communications for KDE. The message returned by the system was:

Could not read network connection list. /home/mikeb/.DCOPserver_XXX__0

Please check that the "dcopserver" program is running!"

Then I uninstalled Kedit, hoping that the damage would be undone.

However, Kate still shows the same message upon startup.

So I reinstalled Kate, and got the same thing.

What did the Kedit installation mess up, and how I can I fix it so I can use Kate again?

View 9 Replies View Related

Debian Configuration :: Error Starting Domain: Internal Error Process Exited While Reading Console Log Output

Sep 9, 2010

I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied

The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?

View 1 Replies View Related

Ubuntu :: Doesn't Want To Finish Download?

Apr 20, 2010

try to download mysql-serverPHP Code:apt-get install mysql-server but it seem to stop downloading this package at 5%Tried converting rpm to deb with alens still no luck..PHP Code:

alien -i --scriptsMySQL-server-5.1.45-1.glibc23.x86_64.rpm
error: incorrect format: unknown tag
chown: cannot access `MySQL-server-5.1.45//etc/my.cnf': No such file or directory

[code]....

View 4 Replies View Related

Ubuntu Installation :: 10.10 Install Does Not Finish

Nov 26, 2010

I've installed previous Ubuntu and other linux distros in the past, so I have a fair idea what I'm doing.

I downloaded the official Ubuntu 10.10 ISO from Canononical, burned to CD and booted from that.

I chose to install, using an existing swap partition, and a freshly formatted (ext4) partition, with mount point "/" as root.

The installation runs fine up to where I enter my User, Computer and Login details.

The forward button to continue, remains greyed out, even tho the copying of files finishes and says down the bottom that I'm ready to go.

At this point, I can't exit, log out, or do a proper restart.

Only a forced reset of the computer gets me out of the installation.

No files get installed on the partition, but the MBR does get written to.

And obviously I get an error trying to boot to it.

I've tried this same procedure 3 times now, with exactly the same result each time.

View 7 Replies View Related

Ubuntu :: Can't Install Filezilla - Couldn't Finish

Mar 21, 2010

I can't install filezilla. I've searched and written the line (sorry can't emember what it was exactly) in terminal, but it didn't find filezilla. I then found another thread and tried writing as shown by aysiu in the screen grab. But, it got to 99% and then after ages said it couldn't finish (see screenshot).

View 9 Replies View Related

Ubuntu Servers :: Start To Finish Using Webmin?

Apr 2, 2010

I put together this 500+ page .pdf how-to, if your looking to setup a server, and manage it with Webmin. built on Debian, but should work here to for the most part[URL]..

View 9 Replies View Related

Ubuntu :: Update Manager Hangs And Won't Finish?

Dec 6, 2010

Ever since I installed Maverick Update Manager it hangs when I update and I eventually have to kill it.

View 3 Replies View Related

Red Hat :: Use USB Mouse After Finish Installation?

Apr 11, 2010

i guess it is because my USB mouse. after unplug it. the installer works well. i am not sure how can i use my USB mouse after i finish it.

View 3 Replies View Related

Ubuntu :: Finish Editing The Grub Menu.1st File?

Aug 10, 2010

I'm trying to find out which hard drive my vista installation is labeled in ubuntu so I can finish editing the grub menu.1st file.

All it says on the sourceforge page is

Quote:

Root - You likely have something along these lines "(hd0,1)". "hd0" refers to the your hard drive while 1 points to the partition. Note that for GRUB, partitions start at 0 and not 1. for example 0=Partition 1, 1=Partition 2 and so on.

It doesn't say how I can find out which one my vista is. So I need to know what my hard drive is in linux. Is it hd0,1 or hd0 or what?

View 9 Replies View Related

Ubuntu :: Finish Creating Raid1 Ramdisk/hdd Partition?

Mar 8, 2011

After some hours of googling, I've managed to increase the size of the default ramdisks (/dev/ram0-16) to 1 GiB each, I raided them together with mdadm to try it out, then created a filesyste, mounted it etc etc. No problems. The problem comes when I used gparted to move my windows partition over and in the unallocated space (1 GiB), I created an unformatted partition (/dev/sda2)Now when I try to create the raid array I get the following:

Code:
:~$ sudo mdadm --create /dev/md0 -l 1 -n 2 /dev/ram0 /dev/sda2
mdadm: Cannot open /dev/sda2: Device or resource busy

[code]....

View 2 Replies View Related

Ubuntu Networking :: Wifi Won't Finish Connecting - Keeps Asking For Password

Jun 5, 2011

I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.

I'm not sure if this problem extends to other wifi networks or just the one at my office.

View 8 Replies View Related

Ubuntu :: 11.04 Error When Updating - Failed To Process

May 4, 2011

ran ubuntu tweak clean up on kernals and it failed to remove one. following this tried to search for updates and getting this error

[code]...

View 3 Replies View Related

Programming :: PHP Log File Downloads After They Finish?

Jul 30, 2010

I'm writing a download script, that will serve files for download and that has to log each download. I'd write something like this:

Code:
log_downlad($file_id, $user_id...);
$dl_path = $server_mount."/".$file_hash...;

[code]...

View 1 Replies View Related

Ubuntu :: Will Not Finish Booting - Press Esc To Enter Recovery Shell

Jan 22, 2010

I have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:

One or more of the mounts listed in /etc/fstab cannot yet be mounted
/: waiting for /dev/loop0
/tmp: waiting for (null)
/boot: waiting for /host/ubuntu/disks/boot
Press ESC to enter a recovery shell

I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.

View 8 Replies View Related

Ubuntu Servers :: Mdadm Raid1 Doesn't Finish Syncing?

Nov 14, 2010

One of the hard drives in my server failed the other day, backups saved the day and downtime was only a few hours, but when setting up the new drive I went ahead and migrated to software RAID, in the hopes it may give me less downtime in the future when a drive fails. It all went rather well, but my main root partition won't finish syncing for some reason.

sda was the original drive with sda4 as /, sda1 as /boot, and sda2 as swap. sdb was the drive that failed and was replaced with the new drive. So I set up sdb with the same partitions of sda, added it to a RAID1 array, copied files from sda, and reboot to md4 as /, md1 as /boot, and md2 as swap. I added the sda partitions to the array, and the sync went off without a hitch on md1 and md2, md4 progresses well, but after a few hours /proc/mdstat just shows this:

Code:
root@d668:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md2 : active raid1 sdb2[1] sda2[0]
9767424 blocks [2/2] [UU]

[Code]...

View 3 Replies View Related

Ubuntu :: Sub-process /usr/bin/dpkg Returned An Error Code (1)

Jan 14, 2010

I think that my computer crashed one time, while I was in middle of installing some new software, and it seems like it have made "dpkg" confused with itself - it thinks, that I still need to install "Wine", but it is allready installed, so everything is allright. But everytime, when I am upgrading or installing any kind of software, it give me this error (just an error, everything still works and installs fine):

Code:
Setting up wine (1.0.1-0ubuntu8) ...
kernel.printk = 4 4 1 7
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1

[Code]....

Errors were encountered while processing: wine E: Sub-process /usr/bin/dpkg returned an error code (1)

View 6 Replies View Related

Ubuntu :: There Was An Error Creating The Child Process Of This Terminal

Feb 13, 2010

I get the error

Code:
there was an error creating the child process of this terminal

When I run this code:

Code:
gnome-terminal --window-with-profile=Scripts

View 2 Replies View Related

Ubuntu :: Error Creating Child Process R-commander - On LTS 10.4

May 8, 2010

I work with social sciences and I really need to use "R". R is a program used for statistics and it has a module called R-commander, which let things easier to deal and comes with several options as opening SPSS files (another statistical package commonly used by Windows users) and other things. THe problem is, as Rcmdr is a module for R, when I run it, it opens a terminal window and then he runs the module, which opens a friendly gui.

It worked okay and clean in Ubuntu 9.10, but for LTS 10.4 I keep getting an error, no matter I reinstall the modules or the entire program. I even installed Ubuntu again without upgrading it from karmic Koala. But there is the same error msg.

The error message says: "Error while creating a child process for this terminal". The strange part is there is no other msgs in the terminal or errorlogs. I really need to use this software for work.

View 3 Replies View Related

Ubuntu :: Permissions Error With PostgreSQL Psql Process?

Aug 13, 2011

I have installed PostgreSQL 9.0 in Ubuntu 11.04.The following is a bit long-winded and cross-relates to PostgreSQL,I ran the PostgreSQL installation thus:

Code:
sudo su
./postgresql-9.0.4-1-linux.bin[code]....

The problem, obviously, is the "Permission denied" error. What/where am I going wrong? From my directory listing I can see that the permissions for gjd_sentinel_data are drwxrwxrwx with owner/group of postgres. On that basis I can't see why there is the problem.I am wondering if it has something to do with the psql process running as, or owned by, user postgres? Or that I am running as the wrong user? Or something else beyond my experience?

---
Ubuntu 11.04 with GNOME2 classic desktop
Single user.
Dual boot with Windows XP Home

View 1 Replies View Related

Fedora :: 13 Wont Finish Booting After Update?

Jun 2, 2010

i just installed fedora 13(fresh install) everything worked fine so i wanted to install the nvidia drivers (using akmod) everything went fine so i rebooted it. It started fine showing everything as[ OK ]But after showingEnabling monthly Smolt checkin: [ OK ]Starting atd: [ OK ]It stops rigth there...I dont know why, i just can reboot and cant go any furtherThe next one must be service local, but cant get it started

View 3 Replies View Related

Networking :: Error - SIOCADDRT: No Such Process

Nov 24, 2010

I am running Fedora Core 7, starting the other day, every time I run service network restart, I get the following output:

Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
SIOCADDRT: No such process

Everything works fine. I can connect to Internet, all my shares are fine, etc. I've done some poking around and found this issue in numerous postings, and it ALL seems to point to an issue with my IP and gateway. I've triple checked all my config files looking for an error and everything "appears" fine, but I can't seem to get rid of that "SIOCADDRT: No such process" error. Below are the contents of the respective files:

/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes

[code]....

how to get rid of that pesky "SIOCADDRT: No such process" error

View 1 Replies View Related

Ubuntu Installation :: E: Sub-process /usr/bin/dpkg Returned An Error Code (1)

Mar 13, 2010

Thought I could just place a hard drive with a preloaded Ubuntu install from another machine (a loaner machine) into this one; change a few drivers and be on my way. Too many errors to count. ALSA; Jack; LiveTex all cratered and I'm tired of fighting this. I've spent more than two days trying to get stuff working and if there's anything I've learned from years of experience there's a time to cut bait and run.

A clean install on the actual hardware I'm using has to be better than the hodge podge I have now.What I would like from the community is recommendations for what to do AFTER the install.

1) where can I find the most up-to-date comprehensive and exhaustive list of repositories for the Synaptic Package Manager?

2) I like to do sound and video processing. I would like to have the program applications
Qsynth, Virtual Midi Keyboard, Muse Score, Csound, GNU Denemo, and many others that either fail to start or produce no sound to work. What, besides the programs need to be loaded in order to make these work?

3) A helpful list of recommendations on what to install along with order preference. In other words 'this needs to be done before this...' on a new Ubuntu install.

In case anyone's interested: Here's a small list of some of the errors I currently have.
AlsaModularSynth - Could not open file.Qsynth1 - Failed to create the audio driver (jack) / Jack server not running.

Errors were encountered while processing:

texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)

Qtractor - The audio/MIDI engine could not be started. Make sure the JACK audio server (jackd) and/or the ALSA Sequencer kernel module (snd-seq-midi) are up and running and then restart the session.

apt-get install alsa-utils - Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)

Jack configuration files not found; the list is endless. Plus many errors trying to get texlive to work.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved