Fedora :: 12 - Freezing - Entire Machine Locks Up - Unable To Do Anything
May 31, 2010
I experienced freeze with Fedora 12. I haven't had any issues up until now at all with stability in Fedora. Since then the problem has persisted with a freeze about once a week and then over the last few days it has started freezing daily. I thought at first that it was a problem with an update and that it would get sorted out with another update but that doesn't seem to be the case.
I installed FC12 within days of it's release and I've had no issues until now.
The odd thing is that the machine only freezes when I'm not using it. I suppose this is a good thing, but it makes it harder to figure out what is causing it.
The entire machine locks up and I'm unable to do anything but use the reset button and get the machine going again. I can not connect via SSH either as all network connections are being refused.
I have looked through the logs and can not find anything odd. There are no kernel panics and there are no Xorg errors.
I'm starting to wonder if this is a hardware issue, but the system drive was just installed in November and hasn't reported any errors when I check it.
View 6 Replies
ADVERTISEMENT
Nov 27, 2010
This last time i managed to get it to install but it starts to load and the little Fedora hourglass fills up to the top and then it hard locks the machine. So.. I trashed the install and but ubuntu on.. but i wanted to give it another go, this time downloading the live CD rather then the DVD and see if i have better luck with it. My system is:
I7 920 with ASUS Mainboard :Asus P6T DELUXE V2
Physical Memory :12288MB (6 x 2048 DDR3-SDRAM )
Hard Disk :Seagate ST95005620AS (500GB) (clean drive not raid)
Video Card 1 :NVIDIA GeForce GTX 285
Video Card 2 :NVIDIA GeForce GTX 285
I have no logs at this time since, i wiped the original install out, i am just finishing out the download of the live CD and will try again. The qustion is is something i have an ovious issue, like the 2 video cards or something incompatable etc?
View 2 Replies
View Related
Feb 28, 2011
Has anyone successfully configured Windows Server 2008 NLB (Network Load Balancing) within VirtualBox?After I create my initial cluster, the guest machine locks up.
View 1 Replies
View Related
Jun 23, 2010
I'm having a really random intermittent fault with video files... all kinds... and also happens with different media players... they lock up the entire system but when i reboot they'll play fine...could this be the graphics card? it's a Sparkle Nvidia Geforce 9500.... is there any reccomendations for a suitable replacement that doesn't cost the earth... I'm looking at starting 3D animation too, so was looking to upgrade anyway...there was some kind of error that randomly popped up once or twice when it was playing files...
View 2 Replies
View Related
Sep 24, 2010
I would like to copy an entire unmounted partition from one machine to another on my LAN. This is basically to perform a very direct backup of the partition.
View 1 Replies
View Related
Jan 6, 2011
After updating Ubuntu 10.04 I'm getting this error message. "Ubuntu is running in low graphics mode. Failed to load the NVIDIA kernel module." I have a NVIDIA Geforce 220 video card and previously installed the NVIDIA drivers. All was working well until this last update. There are countless number of forum messages on how to fix this but my problem is compounded because when I get this message the machine appears to lock up.
It doesn't respond to any keyboard commands such as Ctrl-Alt-F1. I am not able to get to a command prompt at all. This was a fresh install of 10.04 so I believe it uses GRUB2 which automatically boots into the operating system with no menu. Is there a way to stop GRUB2 from automatically running the OS and giving me a menu? I really don't want to reinstall.
View 2 Replies
View Related
Nov 23, 2010
I have been battling with my machine for a while now, it cannot go 24 hours without freezing, I leave it on at night and in the morning it is frozen. I want to use it as a content server to my mobile devices but I have to be home to use it because it always needs a reset. I did a memtest and there were many errors, I realized that my ram voltages were under the min req. I boosted the voltage and ran memtest for 48 hours, no errors. This machine used to be stable for over two years, same hardware, I switched the case and now it wont last a day.
I am running 10.10 64bit, I would post log files but I dont know which one would be useful. I believe it becomes unstable when the screensaver activates. Also sometimes it wont fully boot but will go to the command line and other times it will give random error messages when grub is trying to load. Every week I solve one problem and then something else goes wrong. I have been using ubuntu since hardy on this machine and only lately (10.04 & 10.10) have the problems been occurring.
View 9 Replies
View Related
Sep 16, 2010
Is there a script I can use to send a command VIA terminal to wipe an entire machine of data? If for example there is an intrusion valuable data can be at risk, it would need to be erased.
View 14 Replies
View Related
Jul 12, 2010
i have two linux machines(machine1(rhel client) and machine2(rhel server)) i am able to login the machine2 from machine1 but i am unable to ping machine1 from machine2 fire wall is stoped in both machine
View 1 Replies
View Related
Jan 28, 2010
I am unable to scp to fedora 12 Machine.
View 1 Replies
View Related
Jul 13, 2009
I tried to yum install libvirt but it says it is the latest.I have also checked that i have the latest qemu-kvm virt-manager virt-viewer python-virtinst.I understand that the error msg says that it is unable to find that certain file, libvirt-sock, and i dun think i have it either.
View 3 Replies
View Related
Feb 11, 2010
not able to Login as a root in my fedora 11 machine , but I can login with other user.when I login with as a root user the error occurred "user authentication failed ". After login with user account when I open Terminal and try to login with same username = root and Password= admin then I can login .
View 3 Replies
View Related
Jun 16, 2010
I am not very new to LINUX. I was using UBUNTU for the last 1 year and I have switched to Redhat now because I am thinking of taking a RHCE certification now. Actually the problem is that I am unable to install RHEL 5.2 i386 on my i686 machine, I have bought it recently 1 week ago. I tried to use the boot parameter "linux noprobe" then it said drivers not found after 2 steps when it loads drivers.
When I tried to make a GUI install it hanged after "loading /sbin/loader" and said "kernel panic - not syncing". And when I tried to make a text install it said hanged agin after "loading /sbin/loader" and said something like "Oops: 0000 [#1] SMP". If drivers are needed then when can I get those and how can I install those drivers? here is my hardware information as "lspci" says:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
View 2 Replies
View Related
Nov 23, 2009
In my office i want to install fedora9, here i'm using SATA DVD-RW drive, when i'm trying to install fedora9 i was getting black screen. I've been tried with different Fedora CD's. where as in that i was able to install Ubuntu. can any one suggest me that how to install fedora9 or 11.Here i'm giving the hardware what we have used.
Mother board-DG45ID
Chipset-D45.
SATA DVD-RW.
Hard disk capacity-500gb
RAM-4gb
View 3 Replies
View Related
Jun 14, 2011
Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
View 6 Replies
View Related
Mar 7, 2010
I am not able to find /etc/resolve.conf on my centos machine.it says no such file or dir .with out this file i am not able to connect to internet.when i ping my localhost and my machines ip address i am getting a reply.but when i ping some domain(eg - google.com) i get no reply.i tried manually entering the dns nameserver from system->adminstration->network->dns tab.i dono what ip to enter there..
View 2 Replies
View Related
Jan 6, 2010
I have a ubuntu 9.04 machine i'm using as a file server. I'm able to see that machine from any XP machine, connect to it's shares play music, movies, work off of it NO problems. But i can't view the shares from a windows 7 home edition PC (garbage). AND, from the ubuntu PC, i can't see any of the other shares on network. I get "Fail to receive share list from server".
NOTE: Originally i had this machine connected with wireless card because of location. and I was able to see all shares then - both ways (still not from Windows 7 PCs though). However, when I moved to hard wire connection, the network disappeared. I've tried changing IP addresses, changing switches, but no network. I'd like to keep it hard wire. Can anyone point me in right direction or am i missing information?
View 1 Replies
View Related
Jul 12, 2010
I am having problems with freezing, hanging, blackouts and being unable to boot with 10.4. After having replaced the hard drive 3 times, and after reading much about these problems, have decided to regress to 9.10. How do I do it? I am weary of cleaning my hard disk to download 9.10 in case it freezes in the middle of the process.
View 1 Replies
View Related
Nov 16, 2009
I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies
View Related
Feb 26, 2010
I have installed Fedora 12 from the DVD with no apparent issues. It then had me reboot. The color bar goes all the way across the bottom of the screen and Fedora 12 turns white. The screen goes blank and the light is on for the floppy disk. Keyboard does not function and my LCD monitor says no input signal.If I hit esc key while it is trying to boot I see a lot of things being loaded but it is to fast to read what happens last.---------- Post added at 07:31 PM CST ---------- Previous post was at 09:44 AM CST ----------By searching the forum I found that by hitting esc repeatedly I can get to the Grub menu. Once there I edited the command line and added a 3 at the end of the line.I am now logged in as Root.
View 14 Replies
View Related
Aug 7, 2011
I'm running Fedora 15 64bit on a HP Elitebook 8740w. I have both Gnome and XFCE installed, and have only noticed this problem while using XFCE, but that may just be because I am using XFCE more than Gnome (that's another story - which I won't go into!). Anyhow, twice in the past 3 days I've been in the middle of using the PC, and it has "locked up". By that I mean, using the keyboard and mouse have no effect. The display does not change, moving the mouse does not move the cursor from it's current position. And keyboard commands seem to have no effect (I've tried ctrl-alt-backspace, ctrl-alt-delete, and alt-F1, alt-F2, etc.). The only way I can continue using the computer is to hold in the power button until it powers off.
I suspect, but can't be sure, that it may only be a problem while I'm in XFCE. The reason I say this is that the first time it happened, I was trying to do a screen capture using The Gimp while in XFCE. Today I also tried to do another screen capture (again whilst in XFCE), and X kicked me out back to the login prompt. I then logged into Gnome and was able to successfully do the screen capture. Later in the day I was using XFCE and programming in SpringSource Tool Suite, when the "lock up" occurred again, requiring me to switch the PC off again. I've had a bit of a look in /var/log/Xorg.0.log.old and it finishes like this. I'm not sure if it is enough info to track down the problem though?
[Code]....
View 2 Replies
View Related
Jan 9, 2010
I have a Dell Latitude E5500. For some time I've been installing different distros on it to find which is best suited for my needs. I've tried Ubuntu, Kubuntu, Mandriva, openSuSE, Fedora, and several others. So far, openSuSE takes the cake in terms of what I need, speed, usability, etc. However, I have a soft spot for Fedora and I'm trying so hard to make things work, but I'm kind of at the end of the road unless you guys have some suggestions.
I was in the IRC chat for Fedora asking around, and one user was kind enough to point me in this direction, which made sense as to why I was having issues.
[url]
I was having mixed results, but I had also installed from a Fedora KDE LiveCD. I decided I'd try the full DVD release of Fedora 12 64 bit, so I installed it this evening.
To my disappointment, even the nomodeset parameter does nothing. I get to the blue screen where there's some kind of logo in the center that fills in with white. After it fills in, an F appears. That's where it stops. It just goes no further. Further adding to the confusion is the fact that the fix lists a kernel there, indicating (to me at least) that the kernel listed is when a fix was deployed. I have a newer kernel than that, and despite that I still have these issues.
So needless to say, I'm using my laptop as testing grounds to plop a different distro than Ubuntu on my laptop and 2 servers full time. I really want to make Fedora work, but at the same time I have to use what works for me. Not being able to boot and log in is kind of a big deal. :P
Is there anything I can do or try? I want to keep the OS's I run all the same, so if Fedora 12 bombs out on this laptop, it has no chance on the other servers I plan to run at work. So far openSuSE is running without a hitch but I'd really like to give Fedora 12 a chance....
View 2 Replies
View Related
Sep 30, 2010
I downloaded Fedora 13 (x86_64) just two or three days ago, and installed it in VMWare Workstation. The problem that I am having is that the OS will randomly think that I am holding down the left mouse button, which I am clearly not. I only installed the base system (development pack), and did not add any of ther other repositories. I would really like to be able to use Fedora 13, and not just have it sitting there on my HDD, and also use it as a server operating system (because of the configuration tools)
View 3 Replies
View Related
Jun 16, 2011
Suspend / hibernate locks up my system.
View 4 Replies
View Related
Oct 29, 2010
I have a hdd with several partitions.
sda1 - Fedora
sda2 - windows xp
sda3 - win 7
sda4 - ubuntu
I know how to mount each partition, but what I want is to mount sda, not sda1 or sda3. Just sda.So later, I want to make a copy of MBR of sda.As I know first 512 bytes from sda1 are not the same like first 512 bytes from sda.Thats why I want to mount sda and with dd, copy the first 512 bytes.The problem is how to mount sda, if some partition are ntfs and other are ext3?
View 2 Replies
View Related
Mar 26, 2009
I recently installed fedora 9. Everything works fine after install (except sound but thats a different story). When i run updates everything seems to have worked fine but when i reboot afterwards i get to the login screen which works but as soon as i log in it freezes? the only way to restart is to press the power switch...
View 5 Replies
View Related
Jan 5, 2010
After a recent "yum update", my laptop screen locks up during graphical boot. I use rhgb on the kernel line. The container on the screen fills up with charge and then the screen locks. I have to use the power button to reboot. If I press ESC when the boot splash appears (i.e., boot in text mode), it works.
If I set plymouth to "details" mode using
$ plymouth-set-default-theme details --rebuild-initrd
It boots up correctly. This is equivalent to a text boot screen. I doubt whether it is a video driver problem. I reinstalled the nvidia driver and it is working. I also reinstalled plymouth and plymouth-themes-*.
View 5 Replies
View Related
Jun 8, 2010
This is a bit complicated to discribe because I don't know the cause, but this problem has been happening for some time (over a few years and generations of kernals), with different Gnome distributions, including Ubuntu (and family) and Fedora. When using Gnome (and only Gnome), I frequently see the screen dim. At the same time, all processes will be locked up. This may happen for a second or two, or it make require a reboot. The mouse can usually move and the underlying program GUIs are still visible, it's just that one or more of the GUIs will be dimmed. This is usually most noticeable with a browser, but that may just be a coincidence.
View 11 Replies
View Related
Jul 18, 2011
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
View 3 Replies
View Related
Mar 17, 2010
Last night at 1:47 AM yum installed the current version of kernel-headers on my RHEL5 server:
Mar 17 01:47:47 linux1 yum: Updated: kernel-headers-2.6.18-164.15.1.el5.i386
Mar 17 13:47:22 linux1 syslogd 1.4.1: restart.
This locked the server up until I could physically get to it this afternoon and reboot the server. I then finished downloading and installing the new kernel, rebooted again, and the server appears to be running fine.
This is the second time this has happened on this server.
Has anyone else seen this problem when you setup yum to automatically update your servers? Other than manually updating servers, does anyone have any suggestions on how to keep this problem from happening again?
View 2 Replies
View Related
