I am not able to find /etc/resolve.conf on my centos machine.it says no such file or dir .with out this file i am not able to connect to internet.when i ping my localhost and my machines ip address i am getting a reply.but when i ping some domain(eg - google.com) i get no reply.i tried manually entering the dns nameserver from system->adminstration->network->dns tab.i dono what ip to enter there..
View 2 Repliesi have dual boot system with windows7 and ubuntu 9.04 i am unable to find lilo.conf file in /etc. what's this file? what to do?
View 2 Replies View RelatedI am unable to find any ldap.conf parameter or pam.d/system-auth setting from where i can restrict the LDAP users having uidNumber less than a particular number, say 500 to login into the system.I am using OpenLDAP server and tried pam_max_uid 500 in ldap.conf but it didn't work.
View 2 Replies View RelatedI wanted to change screen resolution manually from xorg.conf and apparently a missed it up and my fedora core stucks and wont start, how can i start fedora in command line (so that i can remove xorg.conf), i tryed ctrl+alt+f1, ctrl+alt+backspace and still cant start in command prompt.
View 10 Replies View RelatedI can not find xinetd.conf on my server (CentOS 5.4 operation system).
View 2 Replies View RelatedI have managed to delete my yum.conf file and do not have a backup. I have tried reinstalling yum and it does complete but when I try and run yum I get cannot find any conf file. Is there a standard conf file I can download? I am running centos 5.3.
View 8 Replies View RelatedUsing google with search option: cman not started: Can't find local node name in cluster.conf /usr/sbin/ cman_tool: aisexec daemon didn't start.I found this URL...I have found the config_version in cluster.conf. Unfortunately, as everyone may have noticed, english is not my native tongue so I am having trouble understanding the part "Make sure you bumped the cluster config version number". Can anyone enlightened me on what should I be doing so that I could "bump" the cluster config version?
View 3 Replies View Relatedcant resolve anything via dns, can ping ips though, traceroute shows that traffic is going through.
[root@home ~]# uname -a
Linux home 2.6.18-128.1.10.el5 #1 SMP Thu May 7 10:35:59 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
[root@home ~]# route -n[code].....
I am confiuring DNS on CentOS 5.4 but unable to resolve.The configuration files and output of commands is given below.IP Address=192.168.0.66
/etc/resolv.conf
nameserver 192.168.0.66
nameserver 127.0.0.1
[code]....
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies View RelatedI have Red-Hat 5.6 , bind package and chroot installed, but i did not find the file named.conf in /etc !!!
View 3 Replies View RelatedI am accessing a remote DB using JDBC from inside a java program. is there any terminal command with which I can see the remote machine's ip/mac address?
View 1 Replies View RelatedI just installed Fedora 12 on a RM (research machines) nBook 4000.
Whilst the trackpad allows me to move the mouse pointer about, it doesn't respond to tapping. Is there anything I can do to get it working properly?
Also, the laptop has an integrated Intel 82852/82855 GM/GME graphics card. How can I tell if it is being detected and working properly? I don't seem to have an xorg.conf file.
Just have F-13 32 bit installed. But can't find xorg.conf. The screen resolution is only 800x600. The LCD display and the video card can support 1640x1280. Please where can I find a standard xorg.conf. Or how to create it here?
View 14 Replies View RelatedI've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
Where can I find the httpd.conf files in FC11 ??
View 1 Replies View RelatedI am newbie to centos. I am trying to install virtual server in my machine. I have installed the Xen virtual machine monitor which comes with CentOS through add/remove software. Here is the problem, I am unable to open connection with Xen hypervisor. Here is the error i am facing:
Unable to open a connection to the Xen hypervisor/daemon. code...
i have sun Virtual box installed on my centos as my host os and centos as guest os.The ip on Sun virtual box virtual interface is10.0.2.15 and the ip on the physical machine is 192.168.1.11.when i try to ping the ip from my vps on centos to my physical machine it pings but it does't work when i try to ping my vps ip from my physical machine.Please recommend the route enteries i need to do in physical machine
View 3 Replies View RelatedI use red hat Es 5.5 64 bit.. I find the item nameserver in resolv.conf cannnot be saved. Everytime ,reboot or restart the netwrok service . The data in resolv.conf will be removed and clear . I need to edit it again . I also try to add DNS1=XX.XX.XX.Xx in ifcfg-eth2 but the same problem. in it , the resolv.conf is still need to edit every network service restart . So, how to save the resolve.conf about nameserver forever ??
[root@vls etc]# cat resolv.conf
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
[Code]...
Code...
Every once in a while I get this error when I plug in my external hard drive. I'm a bit worried I might suffer some kind of data loss. I'm trying to get some more information about this. I have been using this hard drive with Windows 7 previously so it is most likely NTFS I think.
I have installed Fedora 10 on VmWare. I created another user besides root. I am able to login to that user using GNome login and i can switch to root using "su" command and perform the additional tasks.
Now, for one lab assignment, i need to login as root using GUI. But whenever i am trying to do, I am unable to do that. Is there some additional things that i have to do to login as root from GUI?
I am using Ubuntu 9.10 Desktop Version and the entries did in /etc/resolve.conf all the time it is cleaning as and when i am restarting my systems. How to make is permanent solution to keep all the entries done in /etc/resolve.conf
View 1 Replies View RelatedI am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
When i am updating suddenly the power gone.what i have to do now.
View 11 Replies View RelatedI have discovered that after employing the Wicd Network Manager I can no longer connect via ppp. The reason, it seems, is that each instance of Wicd changes the content of my /etc/resolv.conf file from:
Code:
search SPRINT
nameserver 195.128.182.5
to:
Code:
Generated by dhcpcd
# /etc/resolv.conf.head can replace this line
# /etc/resolv.conf.tail can replace this line
It has been suggested that I write a script that does this.
Code...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
I wanna uninstall ipp 6.0 and reinstall ipp 5.3 under linux centos 5.3. I'm not able to uninstall ipp 6.0 and I'm getting this error: ERROR: ERROR: Unable to find rpm tool, add its location to your PATH and restart uninstallation
Also, I'm not able to install ipp5.3 and I'm getting the same error ERROR: ERROR: Unable to find rpm tool, please add its location to your PATH and restart installation
I have been looking for a while and I am unable to find an answer to yum segfaulting.
I have tried:
yum clean all
rm -f /var/lib/rpm/__*
rpm --rebuilddb
I tried upgrading yum and rpm to the newest versions in 5.5 and I still run into the same problem.
fcntl64(6, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=1073741824, len=1}, 0xbfcaf694) = 0
fcntl64(6, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=1073741826, len=510}, 0xbfcaf694) = 0
fcntl64(6, F_SETLK64, {type=F_UNLCK, whence=SEEK_SET, start=1073741824, len=1}, 0xbfcaf694) = 0
access("/var/cache/yum/base/primary.xml.gz.sqlite-journal", F_OK) = -1 ENOENT (No such file or directory)
fstat64(6, {st_mode=S_IFREG|0644, st_size=20480, ...}) = 0
[Code]...
I am trying to compile some thing on a remote machine, need to know following infomation:
1. machine:
2. CPU type:
3. Operation system:
4. Fortran compiler:
5. C compiler:
Where do I look?
What I really want to do is compile an apache version that uses the same layout as the version included with CentOS. I can not however find the correct layout.conf file. The one from the Apache Source doesn't have a REHL or CentOS option.
View 10 Replies View Related