Debian :: Unable To Restart Network Services Using The 'init.d' Scripts
Mar 17, 2010
I haven't been active in Debian for two years back when Lenny was still in 'testing' and noticed that for some reason it is no longer protocol to restart network services using the 'init.d' scripts. I also noticed the same for Ubuntu (which I don't use or could care about) and am trying to understand what is the correct way now for Debian and what changed? I did a search on Google but didn't turn up any results. Is it no longer correct to run:
Code:
/etc/init.d/network restart
View 7 Replies
ADVERTISEMENT
Sep 20, 2010
I m not able to ping nor able to restart the services.....i dont know wht happened.its giving the error.........
Error,some other host already uses address.im having 3 ethernet cards...this is my main server of company.
View 14 Replies
View Related
May 28, 2011
I installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies
View Related
Feb 27, 2010
i have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
[Code]..
View 3 Replies
View Related
Jul 23, 2010
I'm using debian 5 x64 with xfce.Is there a way to configure (start/stop/restart) services (especially Apache2, mySQL and PHP) using a graphical or cli tool? I tried to use sysv-rc, sysv-rc-conf, rcconf and rc-conf in the terminal but Bash didn't find them (Although Synaptic show that sysv-rc is installed).
View 9 Replies
View Related
Jun 15, 2010
Just upgraded fro 9.10 to 10.04, and went to start VMware player. It needed to load and compile some modules.
All of them got a nice green tick except the Virtual Network Device
Unable to start services. See log file /tmp/vmware-root/setup-2986.log for details.
I cant access that log file. Set the folder to read only, and any contents, but theres no file in there.
How do I solve this so I can run WMware?
View 3 Replies
View Related
May 5, 2011
How can I find the order of stated services in boot process? For example I want to check which one runs first: /etc/fstab or networking? I am using ubuntu server 10.04
View 7 Replies
View Related
Oct 25, 2010
I installed an LAMP Server on 10.10. Additionally a simple Sambaserver and a VPN is integrated. Since 3 days I look at some strange behaviour:
Code: sudo init 6 does not take effect. Nothing happens. Code: sudo reboot is working, but all seems to be so ropy. It takes a significant while, before ssh-session is finally terminated. After the system comes up again, the vpn-client gets not the same IP-address by DHCP-server, but the next following of dhcp-range. That is strange, because no other dhcp-client is busy. After a second reboot I get the correct first IP-address of the dhcp-range. That is reproducible.
cron is not working any more. None of my jobs is being triggered. Nothing is logged in /var/log/syslog any more. Services (apache2, mysql, smbd) are not running at the start. I have to run them up manually. Seems like init is somehow smashed? What is your guess? What futher information do I have to provide for analysis?
View 2 Replies
View Related
Sep 23, 2010
This is embarrassing. I can't get a wireless address from my router with dhclient. The distribution is sid/lxde/liquorix kernel with no network manager on /dev/sdb1.
root@sid:/home/jheaton5# dhclient -4 -v wlan0
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
[code]....
View 14 Replies
View Related
Dec 9, 2010
When I change something in network setings using yast (for example hostname) it failes to restart the network. I have to start knetworkmanager manually from the terminal. Does anyone get the same type of behaviour ? I'm attaching the relevant yast log.I'm using 11.3 KDE 4.5.4 2.6.34.7-0.5-desktop kernel.
Code:
2010-12-08 07:06:17 <1> opensusetest(6010) [YCP] network/runtime.ycp:28 Running SuSEconfig ...
[code]....
View 9 Replies
View Related
May 27, 2010
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
View 3 Replies
View Related
Oct 27, 2010
I'm having some difficulty starting a service from an init.d script. It relies on the availability of a network filesystem (glusterfs) which is mounted from fstab. The service starts before the filesystem is up, and crashes.I've tried adding "# Required-Start: remote_fs" to the service init.d script, and delaying it by changing the ordering with "update-rc.d service defaults 90", but neither seems to work. If I add a "sleep 10" to the script, that works, but it feels wrong.Is there some way to get the ordering right? To delay starting the service until after everything in fstab is ready to g
View 2 Replies
View Related
Nov 4, 2015
I got this message when I tried to get in WifiSettings.
"The system network services are not compatible with this version"
What should I do?
View 1 Replies
View Related
Jan 21, 2010
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
View 13 Replies
View Related
Jun 21, 2010
I have a Linux server and 5 desktops. When I shutdown and restart my server the DNS services gets stopped. I dont want it to stop, when i shutdown. It should run. How to enable it.
View 2 Replies
View Related
Nov 11, 2009
im just stating in fedora..why does i cant restart/start/stop my /etc/rc.d/init.d/smb ? actually i notice that there are no "smb" or "samba" file exist in my /etc/rc.d/init.d/ or in /etc/init.d/
and there is no smb or samba found in my /sbin/chkconfig but i have my samba installed. Im using fedora 10
View 2 Replies
View Related
Apr 1, 2010
Xubuntu 9.10 on a DELL Inspiron 1150.I have a problem with intermittent dropping of my wireless connection ( see Belkin 7010 thread).Once dropped, the wireless will NOT reconnect (It just sits there saying "connecting" but never does) Same happens if I manually disconnect - I can never re-connect. On rebooting it will reconnect fine & all is well for sometimes 4 hrs.How can I kill all wireless services & restart them without having to reboot the laptop?
View 3 Replies
View Related
Jan 7, 2010
is it possible to restart /start/stop all services at the same time without rebooting?
View 3 Replies
View Related
Aug 1, 2011
I'm trying to install Wheezy on a Thinkpad T23. want to use Fluxbox, so during installation I uncheck the graphics options because I can install X and fluxbox later. After the install, the first time it boots up it can connect to the wired network and it will download things. But, if I reboot then it somehow loses its ability to connect to any wired network (and the T23 doesn't have built in wireless, so it obviously can't connect to wifi). there something that I can do to get ethernet back? Or, is there a way to, while I'm still on the first reboot, permanently install the ethernet drivers?I'm finally trying tmove away from Windows because a friend happened to show me his laptop which was running the free and open alternative to OneNote (Xournal) that I've been needing.
View 2 Replies
View Related
Aug 11, 2011
Some problems keep bothering me and dont let me use my debian sqeeze with joy.Im in network with no DHCP on. When installing i didnt configure my eth network card.After each restart i need to configure manually my eth because it loses it.
View 7 Replies
View Related
Jul 31, 2011
I have renamed two services by replacing S with K in rc2 and then tried to # update-rc.d script defaults and i get update-rc.d: using dependency based boot sequencingupdate-rc.d: error: unable to read /etc/init.d/script Obviously my command syntax is wrong. I have read the manpage but still do not understand what i have to type.
View 1 Replies
View Related
May 7, 2011
I'm trying to boot Emdebian lenny on my compact flash and it shows the following errors during boot time :
Code:
Mounting local filesystems ... done .
/etc/rc.d/S35mountall.sh : line 45 : uname : command not found .
[code]...
View 3 Replies
View Related
Mar 13, 2010
I have a suspend problem in my laptop. Sometimes, when resuming from suspend, the network adapter is down (that is, the network does not work and the light of the network adapter is off). Restarting the network service doesn't work, because I think that the system forgot about the hardware, and probably the driver should be reloaded.Does anyone knows how to do that?(ps. /etc/init.d/networking restart does not work, because the hardware driver is not being recognized anymore).
View 5 Replies
View Related
Sep 14, 2010
I have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies
View Related
May 21, 2011
trying to bond two 3G modems but I cant Im really new in this matther so I really This is the error that appears
ubu@ubu-AOD255E:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface ppp0=ppp0.
[code]....
View 3 Replies
View Related
Oct 2, 2010
It didn't work. I plugged the cable back in, and it didn't auto-connect, and still says no connection is available after doing the CLI command.
View 2 Replies
View Related
Apr 5, 2010
Whenever I choose "Restart" from the GDM screen, GDM appears to shutdown, and the first TTY is displayed with a login prompt at the bottom (assuming I haven't used that TTY). I am by no estimation a patient individual, but I waited a solid minute or two for something to happen, but nothing ever did. I end up logging in as root on that TTY and running "shutdown -r now" to get the job done. This is a shared computer, and ideally any user should be able to perform shutdown options graphically from GDM.The only mentioned workaround doesn't apply to me as I am using the nvidia driver, not intel.
View 1 Replies
View Related
Jun 20, 2010
I have a RedHat linux server box connected to LinkSys router through ethernet port. I've assigned a static IP to the Linux box, which is out of range with router's DHCP range.
The Linux box has Apache, JBOSS, SVN and several other services installed, but none of these services are accessible through the WLAN. However, SSH and SFTP are accessible from WLAN.
Another interesting observation is that if I open a browser on the linux box (by exporting the DISPLAY to Exceed on my laptop on the WLAN) and point the browser's address bar to localhost:80 or localhost:9080, then I can access these services!!.. So, I suspect that something is wrong with accessing these services from a client on WLAN and I am looking for a solution for the same.
View 3 Replies
View Related
Jan 29, 2011
i have installed apache and bind on my server and i've also registered a dynamic domain through dyndns as jan27.dyndns.biz. i am able to successfully host my own webpages using this method.
then i registered a domain name (lets call it "blah.com") through namescheap.com and have registered my nameserver to my ip address. after reconfiguring the my external zones in bind and restarted my services, i am unable to reach my webpages through the new domain name.. www.blah.com and blah.com would lead me to a opendns.com page but interestingly ns1.blah.com loads my webpages successfully.
View 8 Replies
View Related
May 13, 2011
I need help for analyzing why after I boot from runlevel 5 and smartd services is started, I've got a black screen.I know that the GUI is exist but it looks like doesn't appear (black screen).I do following actions : 1. First I check /etc/sysconfig/desktop there is no data (empty), then I add to /etc/sysconfig/desktop this line :
DESKTOP=GNOME
DISPLAYMANAGER=GNOME
View 1 Replies
View Related
