Debian Configuration :: WiFi Settings - System Network Services Are Not Compatible

Nov 4, 2015

I got this message when I tried to get in WifiSettings.

"The system network services are not compatible with this version"

What should I do?

View 1 Replies


ADVERTISEMENT

Fedora :: System Network Services Not Compatible With This Version

Jul 29, 2011

After a recent update of fedora 15 (2 days ago) I lost my networkmanager icon in top panel completely. Then I check network manager version & found it's version 0.8.0.9997-5.git20110702. After this update I can't connect to internet by any means either via wired or wireless connection. When I try to open Network option from system settings it giving me an error: System network services are not compatible with this version.

I also try to open network-connection-editor by pressing Alt+F2 & typing:
nm-connection-editor

But it not works as well, I can't see any existing network connection there, moreover I can't even manually add any type of network connection there including mobile broadband! Then I do some googling from my windows machine & found this thread- [URL]. According to this thread I try to do downgrading of following 3 packages-

Code:
networkmanager
networkmanager-glib
networkmanager-gnome
But I can't downgrade via yumex as there's no internt connection in fedora. so i do a trick of myself. yumex suggests me to downgrade them to previous version 0.8.0.999-2.git20110509
so i manually download those 3 packages from my windows machine & copy them to /var/cache/yum/... folder. After that I do downgrading via yumex. But even after downgrading problem isn't solved. Same things happening still. No networkmanager icon in top panel & no internet
at present, there's no internet connection in my fedora 15 machine & I'm writing this post from my windows machine.

Moreover when I give this command in terminal:
Code:
sudo service network start
it giving me FAILED status.

View 4 Replies View Related

Debian Configuration :: System | Administration | Services = Could Not Be Loaded?

May 26, 2010

Debian 2.6.32 Squeeze + GnomeI try to start System | Administration | Services and I get an error:The configuration could not be loadedAn unknown error occurredI turned on a whole bunch of different services and suddenly now I can't get back in to switch any of these on or off. I'm assuming there is some manual way of switching these off again, I just don't know where to do this.

View 3 Replies View Related

Debian Configuration :: Unable To Connect To Channels 12 And 13 Even After Changing WiFi Regional Settings

Sep 18, 2015

I have a Dell 1505E with Debian 3.16.7 which is unable to connect to channels 12 and 13 even after changing wifi regional settings to different countries (using iw reg set).12 and 13 are legal to use in the UK. What should I do?

Code: Select allsudo lspci | grep -i wireless
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select alllspci -vv -s 02:00.0
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
   Subsystem: AzureWave Device 2047
   
[code]....

View 0 Replies View Related

Debian Configuration :: Is There A Default 'location' For Network Settings?

Apr 13, 2010

if you try to browse the web from the machine, or log in through a nomachine (nxclient/nxserver) session, it claims there is no internet conenction. You have to run System|Administration|Network and select the stored "Location" for our wired connection. There does not seem to be an option to make this (one and only) "Location" the default. If the machine is up and incoming connections are possible (samba & apache), surely outgoing connections should be working without extra fiddling?

The issue with nxserver (nomachine) becoming unavailable on a re-booted unattended machine (unless someone logs in AT THE MACHINE and runs System|Administration|Network) is causing problems for remote access.

View 2 Replies View Related

Debian Configuration :: VirtualBox Doesn't See Any Network Settings?

Jun 3, 2010

I need to set up a little virtual network with Debian Lenny guests (the host is Debian Squeeze, but I don't think it matters). I installed Lenny in a VM and it works fine. Then I cloned the hard drive, garion@Laptop:~$ VBoxManage clonevdi Linux 1.vdi Linux 2.vdi created a new VM with exactly the same settings as the first one and booted the new disc. The problem is that there's no eth0 in the new VM, but it is in the original one. Also if I "unplug" the cable, dmesg won't notice anything. In the original VM it works fine. They both have the same virtual network card: PCnet-FAST III (Am79C973). I've also tried NAT as well as internal network settings.

View 2 Replies View Related

Debian Configuration :: How To Get /etc/network/interfaces To See Usb Wifi

Jun 16, 2010

I have a netgear wg111t that is running with ndiswrapper. It has an atheros chipset, but calling it ath0 didn't work.

Heres /etc/network/interface :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface auto lo

iface lo inet loopback

View 6 Replies View Related

Debian Configuration :: WiFi Rt73 Won't Connect To Network?

May 20, 2011

I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.

The output of iwconfig is
wlan0IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9

[code]...

View 5 Replies View Related

Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies View Related

Debian Configuration :: Broadcom BCM4328 Cannot Find Wifi Network

Feb 7, 2010

I'm installing Squeeze on on a Dell Latitude D830 laptop with a Broadcom BCM4328 wireless network card, and I'm stuck on getting wireless internet to work. I have the 2.6.32-trunk-686-bigmem kernel. I run KDE and I have knetworkmanager installed to sort the network connections out. Unfortunately, knetworkmanager cannot find any wireless networks for eth2 (the wireless adapter). There is a wireless network, as other equipment can still connect to it.

I've installed the broadcom-sta drivers according to http://wiki.debian.org/wl. When I run iwconfig, I receive the following output: eth2 IEEEE 802.11abgn ESSID:"" Mode:Managed Frequency: 2.412 GHz Access Point: Not-Associated Bit Rate: 14 Mb/s Tx-Power:off Retry min limit: 7 RTS thr:off Fragment thr:off Power ManagementMode: All packages received Link Quality=5/5 Signal level=0 dBm Noise Level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 missed beacon:0

[Code]...

View 5 Replies View Related

Debian Configuration :: WiFi Connection Stuck At (Setting Network Address)

Oct 9, 2015

I have Debian 8.2 with KDE 4.14 and everything runs perfect, except for the internet connection. This problem happens randomly when I turn on my machine. Sometimes when the desktop loads, the connection is already settled.

But sometimes when the desktop loads, the wifi icon is still loading and keeps stuck at "setting network address". Since this problem happens randomly I really don't know what is happening here. My wifi chip is this:

Code: Select all01:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)

This is the problem:

I installed Debian with non-free firmware because of this chip.

View 6 Replies View Related

Fedora :: M275 Wifi Radar - Allow Adjusting / Choosing The Network Which Would Be Compatible With Sugar's Environment?

Jan 9, 2010

Fedora 12. Since I don't have a direct connection, I'm wondering how wifi would be or is enabled when roaming. Is there an application that would allow adjusting/ choosing the network which would be compatible with sugar's environment?

View 1 Replies View Related

Debian :: Windows Compatible Apache Configuration

Aug 6, 2015

Since a few month, I upgraded my configuration to an Acer Aspire E 17 laptop. I dropped the Windows 8 that was installed inside by default. Right now my hard disk looks like that :

- A Windows 10 Installation form the final released version's iso
- A Debian 8.1 Installation with Gnome 3.x as desktop

As I am a developper, I enjoy Debian, the power, and the capabilities unlocked with Linux systems. However, I still need my Windows installation for design work, making templates, etc. For now, I need to boot Debian if I want to code, and to boot Windows if I want to use some proprietary programs such as Adobe's softwares. For a lot of reasons I can explain, I don't want to use alternative like Gimp, and I don't want to run so big softwares under Wine.

So, I want to do the following : I want to create a little partition formatted in ext4 on my disk (something like 10gb ?) and make this partition running my local configuration of Apache 2. This way, I could run my webserver, with the same files both on Debian (when I need to code) and Windows (when I need to design / template and to test some stuffs into my templates files). I could mount this partition under Windows using ext2fsd program, but this way of thinking supposes there is both Apache's linux binaries and Apache's windows binaries to run and manage the server in this partition (making something like a " portable " version ?) .

View 4 Replies View Related

Fedora :: System Network Servicves Are Not Compatible With Version

May 28, 2011

Title pretty much says it all. I was working fine this morning on f15. Did an update and am now getting the above message. Have no internet access from affected machine. Running "NetworkManager" or "systemctl enable NetworkManager.service" does not fix the issue. Anyone else get this today? I know there was a similar known bug during pre-release.

View 14 Replies View Related

Debian Configuration :: How To Enable Telnet And Ftp Services

Feb 8, 2016

I have a few computers running linux and windows and I like to be able to telnet and to ftp but these services are not active I look into system settings but I can not find anything on were to start them.I already try using ssh but it just hangs and nothing happened also I tried to use the graphical app for ftp but same result host not reachable.

View 10 Replies View Related

Debian Configuration :: Disable Boot Services

Jan 31, 2010

I'm running debian unstable and since there was the switch to dependency based boot I can no longer control my boot services.I used to suppress the services that I use rarely during boot with: sudo update-rc.d -f myservice remove This arranged the links in /etc/rc?.d and everything worked.

Now this command only says: update-rc.d: using dependency based boot sequencing.This seems to work until I upgrade the service to a new version and it is enabled again.Do you have any idea of how to disable boot services permanently with the new system?

View 4 Replies View Related

Debian Configuration :: How To Control Access To Different Services

Dec 25, 2010

I'm trying to control access to different services on an Debian server using /etc/group. So that a user I create for FTP usage doesn't fill up my server with IMAP folders or samba garbage.

Services like proftpd have:

AllowGroup ftpgroup

sshd have

AllowGroups sshgroup

And samba have

valid users = @smbgroup

But I can't find the correct option in Dovecot (/etc/dovecot/dovecot.conf) Do anyone have the magic option or a workaround thats doesn't envolve maintaining seperate user databases and password?

View 1 Replies View Related

SUSE / Novell :: 11.2 - WiFi Network Settings On HP2133

May 21, 2010

I have just carried out a complete installation on my HP 2133 mini notebook. It was preloaded with suse 10.1 and the first time I connected it to my BT HomeHub2 was with the network icon on my home screen. Since switching to suse 11.2 when I click the same icon all I get is a setup screen with what seems like millions of setup fields that I do not understand? I have never worked with linux before so do not want to guess the settings. I have looked at google search for the answer but every page seems to be for computer programmers or I am just being dull. I can connect the ethernet cable and it works fine, but I cannot even find a network.

View 5 Replies View Related

Debian Configuration :: System Upgrade => No Network After Suspend And Resume?

Aug 7, 2011

Lately I upraded my Debian using aptitude update/aptitude upgrade - including installing a new kernel (3.0). Since this upgrade I have strange problem with networking. When I suspend my computer and resume it, I do not have connectivity with network:

$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable

[code]....

View 2 Replies View Related

Debian Configuration :: Services That Can Be Safely Disabled With Systemctl

Jul 22, 2015

Have been working most of the day on this usb full install (Jesiie xfce) trying to make it leaner/faster and trying to get rid of minor annoyances like "watchdog: watchdog0 is not shutting down" (couldn't btw), finally managed to disable "You have mail" by commenting out "session optional pam_ mail.so standard" in /etc/pam.d/login. Every little change registers in terms of seconds of boot time saved and how the system responds because, well, i'm booting from a usb 2 drive.Followed some suggestions from "Reduce Debian", removed cups-common, some foreign language locales and man pages. what i can safely do with systemctl.

View 14 Replies View Related

Debian Configuration :: Services Depending On Kernel Booted?

Jul 26, 2011

is there a Debian way possibility to start services depending on the choice made on the (grub) boot prompt? As an example:

Workstation - starts all and everything but no hostap nor xend (run this at home)
Workstation traveller - starts like Worksation except networking (run this in the pub
Xen host - run this preparing some training courses
Xen host HOSTAP - run this having the training course with a WiFi net for the class

I came from Gentoo recently and there is such a possibility. It is relatively simple to put a kernel option which the kernel does not recognize at the boot prompt. Such not recognized options will be sent through to init (and thus to the SysV init scripts) by the kernel and I could script this. What I am looking for is a the "official" way on Debian to do such things.

View 2 Replies View Related

Debian Configuration :: Unable To Access System>Pereferences>Network Connections?

Mar 15, 2011

I just installed Debian and am getting a problem where I can't open the list of network connections. I can use the network manager applet to connect to wireless networks, but I cannot access the network connections list from there either (right click "edit connections)

I'm not incredibly knowledgeable with Linux, but I tried a few simple things I could think of like reinstalling the packages, or restarting the interfaces. (ifdown/up wlan0)

It's strange, because when I click "network connections," I see it show up for a second on the bottom panel, I get some rotating mouse icon while I wait a few seconds and then if goes away. Is there some kind of logfile that could help me identify the problem?

Using Debian 6 on eeePC1000HEB with Ath9k (i think) wireless card. Net Interface: wlan0

View 1 Replies View Related

Debian Configuration :: Server Services Delay After Wakeup From Suspend

Oct 4, 2015

I'm trying to lower consumption of my server/HTPC. After wakeup from pm-suspend server/HTPC is ready to use in 1 or 2 seconds .For example if I suspend it while watching movie in KODI, after resume movie starts playing instantly. But some services (SSH and SAMBA) are not running. I thought it was network problem so I change configuration to static (not DHCP). SAMBA and SSH starts like 15 seconds after wakeup.

View 0 Replies View Related

Debian Configuration :: Configure (start/stop/restart) Services (especially Apache2, MySQL And PHP) Using A Graphical Or Cli Tool?

Jul 23, 2010

I'm using debian 5 x64 with xfce.Is there a way to configure (start/stop/restart) services (especially Apache2, mySQL and PHP) using a graphical or cli tool? I tried to use sysv-rc, sysv-rc-conf, rcconf and rc-conf in the terminal but Bash didn't find them (Although Synaptic show that sysv-rc is installed).

View 9 Replies View Related

Debian Configuration :: Xfinity WiFi Configuration

Feb 22, 2016

I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan

BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm

[code]...

View 0 Replies View Related

OpenSUSE Network :: Cannot Write PAM Settings (abug Or Configuration)?

Feb 13, 2010

I'm using openSUSE 11.2 (GNOME), When I go to yast and if I try configuring Fingerprint Reader or Windows domain membership I get the following error

Code:
Cannot write PAM settings
I want to understand whether its a bug or something related to configuration. When I

[code]...

View 2 Replies View Related

Debian :: Unable To Restart Network Services Using The 'init.d' Scripts

Mar 17, 2010

I haven't been active in Debian for two years back when Lenny was still in 'testing' and noticed that for some reason it is no longer protocol to restart network services using the 'init.d' scripts. I also noticed the same for Ubuntu (which I don't use or could care about) and am trying to understand what is the correct way now for Debian and what changed? I did a search on Google but didn't turn up any results. Is it no longer correct to run:

Code:

/etc/init.d/network restart

View 7 Replies View Related

OpenSUSE Install :: "System Services (Runlevel)" Deos Not List Any Services On 11.3?

Oct 21, 2010

I can see this phenomenon on 2 different systems running 11.3 .In simple mode and also in expert mode.

View 9 Replies View Related

Configuration :: How To Use Wifi On Debian

Jul 18, 2010

My pc is aser aspire 5735z. I have acer nplify 802.11b/g draft-n wlan
but i can use wifi on debian
what i have to do ?
Do i need driver or firmware?
how can i solve this problem ?

View 5 Replies View Related

Debian Configuration :: Wake On Lan Settings Don't Stick?

Feb 11, 2010

I recently switched back to Debian after getting fed up with Ubuntu. The one feature that I haven't been able to get back since the switch is Wake on LAN.If I turn on the computer and watch tcpdump, I can see the packets hitting my machine. I don't think it's a router configuration issue.If I shut down from windows, WOL works.Another sign that it's not a networking or BIOS thing.Here's some stuff I've tried:When I boot up in linux, if I run ethtool eth0, it tells me that wake is set to g (which every guide I've read says is correct).Just in case, I added "post-up /usr/sbin/ethtool -s $IFACE wol g" to /etc/network/interfaces (as shown here: ewtopic.php?f=5&t=42049&p=244736&hilit=wakeonlan#p244736). Also added same thing for post-down.

In /etc/init.d/halt, I changed NETDOWN to no (also from previous guide) to keep my eth card from being shut down.Also changed /etc/init.d/networking to exclude eth0 (as documented in Added "pre-down false" to /etc/network/interfaces.. trepid+wol), to keep eth0 from being shut off.Anyway, I'm guessing that either there's another script somewhere shutting off eth0 or I'm completely wrong in assuming that's the problem. I've been googling this problem for a couple weeks now and I'm totally out of ideas.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved