Ubuntu :: Init: Failed To Spawn Network-manager Main Process: Unable To Execute: No Such File Or Directory
May 27, 2010
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
View 3 Replies
ADVERTISEMENT
Apr 6, 2011
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory
init: Failed to spawn rcS main process: unable to execute: No such file or directory
init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
PS: My Fedora 14 installation is working fine.
View 1 Replies
View Related
Jun 12, 2010
I am using Ubuntu 10.04 LTS. Two days ago I updated using update manager. After that I can not boot Ubuntu. When I trying to boot system showing message " Ubuntu is running in low-graphics mode Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself" But I can not configure it.I can not boot to 'recovery mode' also
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/dev/sda6: clean, 304282/1680960 files, 2964945/6723194 blocks
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[code]....
Now I am using Live CD.
View 3 Replies
View Related
Feb 3, 2011
I have an Acer 9410Z laptop that I believe is running the Maverick Meerkat version of Ubuntu Studio. I just did an upgrade using Synaptic. I get to GRUB, but When I try to boot 2.6.35-22 (or the recovery mode or a real time kernel I had installed )I get the error:
INIT: Failed to spawn ureadahead main process. No such file or directory I then get the Ubuntu Studio splash screen for 2 seconds but then instead of a normal boot I end up in the terminal.
View 3 Replies
View Related
May 26, 2010
I have recently upgraded 9.10 to 10.04 through the alternate CD. However, each time when I boot my system, post upgrade, I receive this error: INIT:failed to spawn spreadahead main process: unable to execute: No such file or directory After that it waits for a long time to show the desktop.
View 2 Replies
View Related
May 28, 2010
I have a minimal installation of Ubuntu, with lxde-core and some other apps I really use. Sometimes when I start the system, it hangs and nothing else happens. I hit Esc and then I see:Code:init: Failed to spawn rc-sysinit main porcess: Unable to open console: Input/Output error.I get stuck there, and the only thing I can do is to hold the power button, shutdown, boot again, and pray it will boot fine. Sometimes it does, sometimes it doesn't.
View 1 Replies
View Related
Oct 26, 2010
I just installed Maya 2009 on Fedora 13.It seemed to run the RPM install fine, but when I go to Applications > Graphics > MayaI an error:Could not launch 'Autodesk Maya 2009 (64-bit)
Failed to execute child process "/usr/autodesk/aya/bin/maya"(no such file or directory)I browsed to this location in the file browser and there definately is a file called maya in "bin"
View 1 Replies
View Related
Oct 15, 2010
There seems to be a common solution to get the webcam working with Skype - rather than launching with Skype you launch with LD_PRELOAD=/usr/lib32/libv4l/v4l2convert.so skype - so far so good. When I do this I get the error There was an error launching the application. Details: Failed to execute child process "LD_PRELOAD=/usr/lib32/libv4l/v4l2convert.so" (No such file or directory). But I do have that directory and file on my system.
A ubuntu community doc talks about the terminal command sudo ld.so.preload-manager when I action this I get sudo ld.so.preload-manager /usr/lib/libv4l/v4l1compat.so [sudo] password for dad: sudo: ld.so.preload-manager: command not found
View 9 Replies
View Related
Feb 1, 2010
Failed to execute child process "gnome-help" (No such file or directory)I get this error when clicking on the Help button in, for example, the preferences dialog box like for the Time and Date panel.I cannot find anything in the Synaptic Pkg. Mgr. or Ubuntu Software Center that indicates "gnome-help".
View 3 Replies
View Related
Apr 14, 2010
I've installed MatLab in my Acer Aspire one netbook which runs karmic. Does anyone know what can cause this error message from appearing when i click on the icon? Could not launch 'MATLAB R2009a' Failed to execute child process "matlab" (No such file or directory)
View 1 Replies
View Related
Feb 13, 2010
Am using ubuntu for a year Now am getting some prob am unable to boot it is showing init rcefault(2111) main process terminated
View 1 Replies
View Related
May 2, 2011
I upgraded from Ubuntu 10.0.4 to 11.0.4 on a Dell Optiplex. Now, when I boot, I am given the option to boot into different kernels. I select "ubuntu, with Linux 2.6.38-8-generic", which results in a black screen that reads
Code:
init: plymouth main process (58) killed by SEGV signal and that's where it hangs. Pressing ENTER or hitting Esc does nothing. What steps can I take to recover my machine and all the files I used to have on it?
View 2 Replies
View Related
Sep 16, 2009
What can I do about this?
Failed to execute child process "realplay" (No such file or directory)
using gdome Ubuntu, realplayer is in my Home folder (RealPlayer11GOLD)
View 3 Replies
View Related
May 11, 2011
When I press )print screen button ) it says ....here was an error running gnome-screenshot:Failed to execute child process "gnome-screenshot" (No such file or directory)
View 4 Replies
View Related
Apr 1, 2010
Here is the message:Failed to execute child process "/usr/lib/firefox-3.5.4/firefox" (No such file or directory)Firefox is installed and is there.
View 10 Replies
View Related
Aug 3, 2009
I am running F11 and I want to mount an FTP, but when I try to connect to an ftp server using Places -> Connect to Server, or the bookmarks I made I get an error that says 'Failed to execute child process "/usr/lib/firefox-3.5/firefox" (No such file or directory)' and sometimes it mounts anyway, but most the time it doesn't, and it never connects to the folder I asked it to, I just have to open the mount and navigate to it. I figure this happened because Firefox upgraded to 3.5.1 and the folder is now /usr/lib/firefox-3.5.1/firefox, but I don't know how to update this so that it looks in the right location.
View 6 Replies
View Related
Nov 7, 2010
I have Ubuntu 10.10 installed. When I boot, this error message appeared "init: ureadahead main process 388 terminated with status 5" After that, another error message appear saying " *ERROR* render ring head not reset to zero"
View 2 Replies
View Related
Dec 1, 2010
Code: init: ureadahead main process (423) terminated with status 5 Ubuntu 10.10 lorentz tty1
lorentz login: The first line of the above shows up during boot before the display goes graphical. I can see it again (all of the above) when I Ctrl+Alt+F1 to access the first text console. Anyone know what is causing this, what problems can happen as a result, and what should be done about it? I moved from 9.10 on one machine to 10.10 on a new machine, so I don't know if it's a hardware problem or software. I am running 64-bit. I am not really seeing any problems happening besides the few scattered application and GUI glitches that are common with a new/migrated setup.
View 2 Replies
View Related
Apr 20, 2011
I keep getting this message as the first thing I see when I boot up. Afterwards, it displays the ubuntu logo and dots under it and then the screen blacks out, but the display lights act like its OK (wireless ETC). should I use a boot CD or something? The hard drive is fine and this happened after the computer blacked out during updates. i scanned the hard drive and its OK, according to the little scan thing you can do before booting up. I have a Compaq Presario V200. For specs, thats all I know.
View 1 Replies
View Related
May 20, 2011
I found below message in my boot.log. init: ureadahead-other main process (814) terminated with status 4
View 4 Replies
View Related
Jul 12, 2010
I have a project in which many processes run. p1,p2,p3.
->There are some .so files are included in some process when needed example ppp.so in process p1 (when ppp is needed and will go like a plugin) but it has a init () function how a process includes a init() function ?
->process p1 has main function i.e main()
->so evry process has main() right ?
what is the difference between init () and main () functoins. where is init () used and how many init() a process van have ?
View 3 Replies
View Related
Jan 23, 2010
I have upgraded my ubuntu to the latest version a few days ago. Prior to the update I played a little with my partitions (transferred about 15GB from my windows partition to ubuntu partition).Up until yesterday everything worked. For some reason ubuntu will not load up now. After selecting ubuntu on grub i get the following msg: init: mountall main fsck process (574) terminated with status 3 mount of filesystem failed one or more of the mounts
View 3 Replies
View Related
Jun 2, 2010
My USB stick is this one: [URL] I can't get it to scan my frequencies. PC finds the stick (lsusb):
Code:
Bus 002 Device 005: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick When I plug it in, dmesg shows this:
Code:
[ 5680.696043] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 5680.834917] usb 2-2: configuration #1 chosen from 1 choice
[ 5680.849872] af9015: tuner id:179 not supported, please report!
[ 5680.852951] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[code]....
But if the directory is created, then after the same command I have
Code:
scanning /usr/share/dvb/dvb-t/lv-Riga
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No such device
I found on the internet a firmware for my USB HDTV DVB-T stick named "dvb-usb-af9015.fw" and copied it into /lib/firmware/ but I have not seen any difference with that.
View 1 Replies
View Related
Sep 11, 2010
I installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups
And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.
View 9 Replies
View Related
Apr 25, 2011
So I am trying to install Plastic 2.8.148.0 on a virtual server. I have the install package that i copied over to the machine using WinSCP i then gave the file executable permissions by using the command "chmod +x PlasticSCM-professional-2.8.148.0-linux-installer.bin" But when i try to install the package by using the command "sudo ./PlasticSCM-professional-2.8.148.0-linux-installer.bin" It gives me the following message.
sudo: unable to execute ./PlasticSCM-professional-2.8.148.0-linux-installer.bin - No such file or directory
why it isn't recognizing it? I know the file was there because i was able to change permissions and i can see it with -ls command.
View 2 Replies
View Related
Sep 30, 2010
I was attempting to setup Oracle 11g on my system using these steps: [URL] had to stop and shut down after the third "segment" of commands:
Quote:
root@luan-laptop:~# cd /bin
root@luan-laptop:/bin# ls -l /bin/sh
lrwxrwxrwx 1 root root 4 2010-20-04 21:33 /bin/sh -> dash
[code]....
View 2 Replies
View Related
Apr 6, 2011
Just figured this one out and thought I'd post it here in case it helped someone else. Skype just upgraded itself from 2.1 to 2.2. After upgrading it didn't start, and I got the message
"failed to execute child process skype-wrapper" First test out if skype runs from the command line, by running this in a terminal
Code: skype & If it runs, you're good to go: simply right click on the menu, locate your entry for skype and change the command to launch it from skype-wrapper to skype. The reason for this is that in the 2.1 version, skype needed a script called skype-wrapper to set some varibles before start up. Upgrading removes the script, but failed to update the menu entry.
View 5 Replies
View Related
Feb 9, 2011
After upgrading from 10.04 to 10.10 I have had some problems booting my Ubuntu. It all started when restarting after the upgrade, and I got the error;
Code:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting / sys/ on root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or dirctory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= boot arg
BusyBox v1.13.3 (Ubuntu 1:1.13.3.1ubuntu11) built-in shell (ash)(initramfs) After searching the Internet, I found a "solution". I just had to boot with a USB stick with the Ubuntu Rescue Remix (the normal Ubuntu USB won't boot either), and i wrote;
Code:
sudo fsck /dev/sdb5
Now I could start my Ubuntu again. So whats the problem? If I turn off my computer the normal way, there is no problem, but if I log off, put it into sleep mode, if something happens and I have to turn it off with the button it goes back to the first problem, and I have to reboot it with the USB stick and fix it all over again! If I don't have the USB stick with me, I probably wont be able to use my laptop!
View 9 Replies
View Related
Jul 11, 2011
I'm trying to start a program, but I keep getting the error:
"There was an error launching the application." Details: Failed to execute child process "/home/jjo/Desktop/0ad/build/resources" (Permission denied)
I've tried changing the permissions of the file, with no luck.
View 9 Replies
View Related
Oct 22, 2010
Every time I try to execute a .exe file it says
Code:
Failed to execute child process
but when I type wine and the file it says
Code:
bash-4.1# wine
bash: /usr/bin/wine: No such file or directory
View 1 Replies
View Related
