I'm trying to boot Emdebian lenny on my compact flash and it shows the following errors during boot time :
Code:
Mounting local filesystems ... done .
/etc/rc.d/S35mountall.sh : line 45 : uname : command not found .
[code]...
I've been dual booting 10.10 with Windows7 for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem.
It failed to boot and got this message: no init found. try passing init= bootarg
The problem now is that it requires a Live CD session and I keep getting this: GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
In case it matters, I didn't install 10.10 from an ISO, I just upgraded from 10.04.
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
So I was looking around for something to auto log me in. I only have the basic Debian system...no X...just command line.
Anyway, I try mingetty and it looks like I've broken it. I'm using this as an NFS server to store my music which I have up and running. It seems that it works even when I'm not logged in (I didn't know that at the time). Now when I start my computer it shows INIT: cannot execute "/sbin/mingetty" and it shows that 10 times, then I get: INIT: Id "1" respawning too fast: disabled for 5 minutes
It seems that it's just going to keep doing that and wont stop
I followed this article: [URL]
So, I made a bash script that I need to be executed on booting, I created it in /etc/sbin/mount_folder.sh
Code:
sudo chmod +x mount_folder.sh
sudo ln -s mount_folder.sh /etc/init.d/mount_folder.sh
Then I try to:
[Code].....
Also, if I create the symbolic link in the same folder I can execute it normally
me the difference between /etc/init.d scripts and /etc/init.d/rc?.d scripts.
View 3 Replies View RelatedI have written an init script and placed it in /etc/init.d/ directory.What I would like to know is, will the script run automatically or we need to install the script using "install_initd" command.If I have to invoke this command manullay, what will be the best place to do this ? Can I add this to "/etc/init.d/rcS" file
View 6 Replies View RelatedopenSUSE 10.3 on Itronix IX260+ Stuck on command line, init 3, and all attempts at graphic init 5 fail. Get these messages:(EE) No devices detected; Fatal screen error: no screens found; AIGLX disabled Primary Device is PCI 01:00:0kernel:device-mapper:multipath round-robin:version 1.0.0 loaderkernel:device-mapper:table:253:0:multipath: error getting device
kernel:device-mapper:ioctl: error adding target to tableProblem would seem to be with the device-mapper, but have no idea how to fix it.
While I was using my computer a few days ago, the terminal stopped working properly, so I tried to reboot, and when it started up again it wouldn't boot and said "no init found. try passing init=bootarg"
This has happened twice before, so I really need to figure out what keeps happening, otherwise I can't continue to use linux. i reinstalled both times before. i think that this is caused by a process that prevents me from using the hard drive, because when I try to check the disk in the terminal or in gparted, it says Device or resource busy while trying to open /dev/sda1. Filesystem mounted or opened exclusively by another program?
Also, in the disk utility, in the lower right corner of the filesystem it has a spinning "loading wheel".(i'm not sure if that means anything)
I am using ubuntu 10.10, but am not sure what kernel I am using, but i tried a few different kernel options(there's three of them at start up). safe mode does not work either.
Im am building a Linux distro. It will be very tiny and fast.
I only have a minimal linuxkernel (bzImage) who is 1,2 mb big. And then I have Busybox who is 174,6 kb big.
The commands in busybox is: cd, ls, mkdir, rmdir, wget, httpd, clear, rm, poweroff, halt, reboot, fdisk, mount, umount, free, and cp.
When I compiled the kernel i use initramfs/initrd function and point it to a folder where initrd/initramfs source is.
The kernel works OK with others initramfs/initrd files. But not with my own.
Quote:
Here is how the end of the kernelcomplie look like.
Quote:
Here is my init file who is the initrd/initramfs source.
Quote:
The initramfs folder contains "bin" (folder) and "init" a file. No more.
The problem is that the kernel cannot find/read init file.
I am using Ubuntu 10.04 LTS. Two days ago I updated using update manager. After that I can not boot Ubuntu. When I trying to boot system showing message " Ubuntu is running in low-graphics mode Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself" But I can not configure it.I can not boot to 'recovery mode' also
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/dev/sda6: clean, 304282/1680960 files, 2964945/6723194 blocks
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[code]....
Now I am using Live CD.
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory
init: Failed to spawn rcS main process: unable to execute: No such file or directory
init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
PS: My Fedora 14 installation is working fine.
ow Debian init system is organized actually (btw i am using stretch) ? I see systemd installed, with some services run from it (systemctl shows a small list), but at the same, i still see /etc/init.d full of traditional init scripts.
View 3 Replies View Relateduse command dpkg -i ****.deb let my deb install a file in /etc/init.d/ what i need to change in debin/rules file?
View 9 Replies View RelatedI need to start script I created every time so I created:
/etc/init.d/startflowcapture.
There I put:
flow-capture -w /var/netflow/ft 0/0/2055 -S5 -V5 -E1G -n 287 -N 0 -R /usr/local/netflow/bin/linkme
I made it executable:
chmod +x /etc/init.d/startflowcapture
But permanently adding it to rc defaults shows this error:
update-rc.d startflowcapture defaults
update-rc.d: using dependency based boot sequencing
insserv: warning: script 'K01startflowcapture' missing LSB tags and overrides
insserv: warning: script 'startflowcapture' missing LSB tags and overrides
I installed ntop and it works but I cant make it autostart with my server. I started ntop with its parameters and it works as a daemon but if I restart the server ntop wont load even if an ntop file is in /etc/init.d. I executed rcconf and it wont list ntop. How can I make it autostart in daemon with my parameters? (like ntop -d -w12345)
View 7 Replies View RelatedI installed ubuntu on my dual boot Debian/Lenny and windows 7 toshiba laptop. Now when I try to boot Lenny i get the following error messages:
kinit : name_to_dev_t(/dev/sda6)=dev(8,6)
kinit : trying to resume from /dev/sda6
kinit : No resume image doing normal boot ....
[code].....
I can see the whole filesystem is there. The problem may have something to do with the boot loader. I was originally using Grub 1.5 when I just had Lenny and Windows 7, but when I installed ubuntu it has installed GRUB 2. When I use the debian install cd to go into rescue mode, all the init scripts are still where they should be. Another thing that happened when I partioned of a section for ubuntu all the dev numbers went up one. In the debian /boot/grub/menu.lst windows 7 was booting under (hd0,1) now it boots under (hd0,2) debian used to boot from (hd0,7) with root=/dev/sda8 but now it is under (hd0,8) root=/dev/sda9 in the GRUB2 menu.lst. Is there anyway to get my Debian back up and running? After 6 months of studying it at uni I am finally learning my way around and want it back.
My setup: Debian Squeeze;4 physical partitions, 3 of those create 1 volume group, 13 logical volumes within that vg; 1 unencrypted(boot); all others encrypted including swap.As stated in the man crypttab:The order of records in crypttab is important because the init scripts sequentially iterate through crypttab doing their thing.
View 2 Replies View RelatedI have a firewall script setup to run in rc2.d. There is a K99 for it and then an S99. The problem however, is that it isn't being called. No errors, no logs, nothing. The symlinks in /etc/rc2.d point to /etc/init.d/script, but nothing ever happens on boot or shutdown. I can manually do /etc/init.d/script start and it will start just fine, including printing a line that it is starting. What's going on here? The permissions are the same as the other scripts in the init directory, so I doubt that is a problem.
View 4 Replies View RelatedI installed jessie. every time reboot jessie i have no sound and i must run "alsactl init", after run command all things work great.
View 1 Replies View Relatedrecently I've updated my kernel, i had to reconfigure some stuff, in particular, the b43 module is not loading at init process, my question is: what command should I use to load it from the init? or what file should I hagve to edit?
View 1 Replies View RelatedThis is embarrassing. I can't get a wireless address from my router with dhclient. The distribution is sid/lxde/liquorix kernel with no network manager on /dev/sdb1.
root@sid:/home/jheaton5# dhclient -4 -v wlan0
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
[code]....
I'm having some difficulty starting a service from an init.d script. It relies on the availability of a network filesystem (glusterfs) which is mounted from fstab. The service starts before the filesystem is up, and crashes.I've tried adding "# Required-Start: remote_fs" to the service init.d script, and delaying it by changing the ordering with "update-rc.d service defaults 90", but neither seems to work. If I add a "sleep 10" to the script, that works, but it feels wrong.Is there some way to get the ordering right? To delay starting the service until after everything in fstab is ready to g
View 2 Replies View RelatedHere is my xorg.conf when I attempt to use fglrx:
Section "Device"
Identifier "ATI RADEON HD4850"
# Driver "ati"
Driver "fglrx"
EndSection
Also, doing /etc/init.d/start/ gdm3 says Starting GNOME display manager: gdm3 but it doesn't do anything. I tried pressing ctrl+f1 all the way to ctrl+f12 and nothing. What does work however is sudo gdm3 (with the "ati"/"radeon" driver --- nothing works at all with fglrx).
I am trying to get fglrx working because I want to fix this compiz issue I've been having here which could be related to the shortcomings of the "ati"/"radeon" driver: viewtopic.php?f=10&t=40991&p=312577#p312577
When trying to install Debian 6.02 from a boot cd, the boot halts with the error message Kernel panic - not syncing: No init found. Try passing init= option to kernel. In looking for a solution I see a great deal about this problem occurring after messy upgrades and the like, but when when booting from a cd downloaded right from the debian website.
View 3 Replies View RelatedI recently tried to install php5-gd package on my debian vmware server and it failed at libc6 - i386.
Afterwards every command other than CD caused a Segmentation fault and the server would no long boot, showing the following error
[ 4.808086] init[1]: segfault at 0 ip (null) sp bff4645c error 14 in init[8048000+8000]
[ 4.808372] Kernel panic - not syncing: Attempted to kill init!
[ 4.808442] Pid: 1, comm: init Not tainted 3.2.0-4-686-pae #1 Debian 3.2.65-1
i have this problem i install android sdk, and i install libreries: libstdc++5, lib32stdc++6, lib32ncurses5 and libstdl1.2-dev,
now if i use ldd comand don't have problem, but when i use eclipse and i compile a simple example (hello word example), i have this
error: [Emulator] SDL init failure, reason is: No available video device i have a notebook toshiba satellite A300-1RI whit ATI Radeon 3650, i install the amd driver and all work well.
I haven't been active in Debian for two years back when Lenny was still in 'testing' and noticed that for some reason it is no longer protocol to restart network services using the 'init.d' scripts. I also noticed the same for Ubuntu (which I don't use or could care about) and am trying to understand what is the correct way now for Debian and what changed? I did a search on Google but didn't turn up any results. Is it no longer correct to run:
Code:
/etc/init.d/network restart
I installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies View Related
