Debian :: Net-install Cd Without Internet Connection?
Aug 7, 2011
I am planning to install debian in my pc,.I have xp in one partition and want to install debian in 4gb partition (+500mb for swap).PC: intel p4, 3.0ghz, 1gb ram i install debian from net-install cd without internet connection? If so, after installing the cd can i connect to internet using my usb modem (T-mobile/Huawei modem UMG1831). In case of ubuntu i heard of an app to switch the device between mass storage and modem. How in Debian?
View 1 Replies
ADVERTISEMENT
Apr 15, 2011
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
View 4 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Sep 26, 2010
I am working on a cross-platform application for Linux ,Apple and Windows, so I have a full tower system with four SATA hard drives that be selected with a switch, so that I can change drives and operating systems at will. -sort of makes me a jack of linux systems, but master of none.It's important to mention this, because it shows the strangeness of the problem as it is isolated to Debian* systems.
So where does debian/ubuntu get it's information to establish a network connection?How do I rectify the problem? I can hardly blame the hardware (RTL8111B), because the problem is isolated to Debian systems.
View 3 Replies
View Related
Feb 10, 2011
what do u feel now on ur Debian 6? did any body tried debian 6 BSD kernel? i use now ubuntu but i want to try Debian but due to internet connection problem
View 14 Replies
View Related
May 6, 2010
I have a pc with debian lenny, this machine doesn't have internet connection, when I need a new package I installed it with dpkg, updating phyton I got some broken dependences and some services doesn't work properly. I have another pc with debian lenny that is updated, my question is: what is the process to extract the packages downloaded in the pc-B, and create a mobile repository?
View 1 Replies
View Related
Oct 21, 2013
I am running Debian on my server (OpenMediaVault) and i am connected to a VPN service, using openvpn. BUT! How do i make sure that the internet connection, stays through my VPN service, or gets blocked, if the connection through the VPN tunnel fails? Jeah, yeah call me paranoid..
I have read this: [URL] ....
I don't know how i use the source code. Is there a script somewhere i can just download? And i don't want the LAN connection to be blocked.. only outgoing traffic!!
View 14 Replies
View Related
Jan 31, 2010
I followed this guide for my Acer Aspire One A150, and got wireless and suspend working fine:[URL]pendtoRAMThe only problem is that wireless is dead after resuming from suspend. I have to type:/etc/init.d/networking restart and after that everything works just fine and I get internet again.Is there a way to automate that process on resuming from suspend, so that I won`t have to type it manually each time?
View 4 Replies
View Related
Oct 29, 2014
freshly installed Debian-netinst, configured internet connection. Pinged Google - all transmitted packets were received, 0% loss.
Yet I am not sure if I have internet connection for what ever package I am trying to install using apt-get install package_name, I receive
E: Unable to locate package package_name
How can I check internet connection from CLI?
View 3 Replies
View Related
Oct 25, 2015
I have been using this fresh Debian 8.2 install for 3 days without any network problems.
What I did this morning :
- Booted in my windows partition and rebooted immediately just to remove the system from the sleep state
- Mounted a NTFS hard drive and copied some file to my .wine drive_c
Thats when I noticed that my connection was down.
I verified all the physical layer. My laptop has access to the internet tried to connect on an another router with eht0, changed the wire, nothing worked.
It seems like the interface can't get a dhcp ipv4 address even when I try to force is with dhclient, I get no offer when my laptop works just fine.
- Booted on my windows partition without changing any connection and my internet was working.
- Booted back on debian still not working...
View 14 Replies
View Related
Jan 12, 2016
When launching any program (iceweasel, ssh, dropbox) that requires internet connection as a normal user it does not connect.
However if I try launching them as root it does. Sometimes, I have to manually disable/enable wifi and then reboot in order to access Internet, sometimes it works and sometimes it does not.
I have Code: Select all3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14) x86_64 GNU/Linux
My resolv.conf has the following permissions
Code: Select allsudo ls -l /etc/resolv.conf
-rw-r--r-- 1 root root 26 Jan 12 05:03 /etc/resolv.conf
My Code: Select allsudo lspci is
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
[Code] .....
View 9 Replies
View Related
May 19, 2011
I recently installed Debian "Squeeze" onto a Thinkpad T420, alongside Windows 7. During the installation Debian was unable to detect my NIC (Intel 82579LM), but otherwise the installation completed normally. I've installed the required e1000e drivers, and added "alias eth0 e1000e" to the modules file. Using lspci I can see that the computer detects the card, but still fails to load the drivers for it.
I'm at a bit of a loss, as this is my first time using Linux. After a bit of searching it looks like the 2.6.38 kernel resolves the issue with this card, so I guess that's my next step.Unfortunately all the installation instructions I've found assume an internet connection.Is there a simple way to update the kernel without a connection, or -even better- an install disc with 2.6.38 so I can start from scratch?
View 3 Replies
View Related
Feb 20, 2016
I rebooted my vServer (Debian 8) and it doesn't came back up. Well, I used the rescue console on my server and the server seems to be running fine, except the network was broken. So I tried 'ifconfig' but nothing came up. So I tried to enable my interface with 'ifconfig venet0 up', and now it appears in my ifconfig list
Code: Select allroot@i67svof:/var/www# ifconfig
venet0Â Â Link encap:UNSPECÂ HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00Â
     UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
     RX packets:557 errors:0 dropped:0 overruns:0 frame:0
     TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:0
     RX bytes:36463 (35.6 KiB) TX bytes:0 (0.0 B)
My HWaddr doesn't look that well :) 'ip addr' prints this result:
Code: Select allroot@i67svof:/var/www# ip addr
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
These are the last lines in /var/log/syslog:
Code: Select allroot@i67svof:/var/www# tail /var/log/syslog
Feb 20 11:34:16 i67svof systemd[1]: Stopping memcached daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Network Name Resolution...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Regular background program processing daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Login Prompts.
[Code] .....
And finally my network config in /etc/network/interfaces
Code: Select all# Auto generated lo interface
auto lo
iface lo inet loopback
# Auto generated venet0 interface
auto venet0
[Code] .....
View 1 Replies
View Related
Apr 5, 2010
Can I install Ubuntu Studio 9.10, Ubuntu 9.10 or Kubuntu 9.10 Live CD/DVD on a computer without internet connection? becouse I build computer for ubuntu professional photography only Data like external HD
View 4 Replies
View Related
May 24, 2010
I am using Ubuntu 10.04 alongwith Linux Mint & Windows XP. A friend of mine who has the same computer configuration & same hardware is planning to install Ubuntu 10.04. But he'll not be having internet connection at that place. So I was thinking of helping him by giving a CD which will be having all the required software on that which I have installed in my ubuntu 10.04. So that when he installs Ubuntu he just need to put the CD. So is there someway thru which we can put our installed programs on the CD so that we can use them again when we don't have internet connection? Like APT on CD...
View 3 Replies
View Related
Jul 20, 2011
Trying to install Ubuntu Studio 11.04 on an old pc. It has no internet connection at its location.
When the install cd goes to retrieve files obviously it's not getting them. Is there another way to get the required files from another cd?
Screen goes red and network interface isn't detected
.
Dmraid is another file it goes "looking " for...
Can get any required file, just has to go onto the machine via cd.
View 4 Replies
View Related
May 9, 2011
I've installed Debian squeeze using the net installer and while beginning the installation I loaded the 'ppp-udeb' module to connect to the internet for accessing the Debian mirrors during the installation. Now, whenever I boot into Debian, internet connection kicks in automatically. I would want to have control over when to start the internet connection. I don't want it to be triggered during my login.
View 2 Replies
View Related
Aug 17, 2015
In one of my customers, the new internet connection have no public IPV4(using GCNAT), only public IPV6.
And there are various services that require external access, like, vpn (openvpn), a java/web system, ssh, rdp(windows).
fileServer(by vpn).
All is running ok in IPV4.Maybe, the solution is a NAT 6to4. We know this is the future, no more public IPV4.
View 0 Replies
View Related
Oct 29, 2010
When I make a vpn connection to an openvpn server, I loose the internet connection.
The VPN works all right.
Server config (extract)
Client config
Client route without the VPN connection
client route with VPN connected (internet lost)
Is there anything I can do to the push rule of the servers's config file?
View 1 Replies
View Related
Apr 15, 2011
I am using Empathy IM client to access to gadu gadu and to message with my friends. The strange thing that is happening is that I keep on being connected and then disconnected and then connected again even if I am continuously connected to my internet connection (no problem when surfing or using skype for example)It also seems to come only from me because when my girlfriend is using the same gadu gadu on her windows laptop simultaneously, she doesn´t get disconnected (whether when she is at home and using the same connection as I am or when she is outside, meaning that it doesn´t seem to come from the whole gadu gadu network)maybe it has something to do with the ports that gadu gadu is using but it is strange that sometimes it is working for a period of time and then not and then again.
View 1 Replies
View Related
Aug 13, 2011
I have just installed Debian Squeeze on my spare computer (dual booted with Ubuntu 11.04) and I cannot connect to the internet using Squeeze. Due to my ISP, I have to manually connect this computer and on Ubuntu copying and pasting a text file such as this into the terminal works with no problems.What do I need to do to manually configure my Squeeze internet connection?
View 5 Replies
View Related
Aug 31, 2011
I replaced my motherboard and processor but am keeping my old hard drive without reformatting it. Things work well except that I cannot connect to the internet. I am thinking that I just need to reconfigure the connection to see the new network hardware. I tried /etc/init.d/networking restart but that doesn't do anything. What am I missing? By the way it is a wired connection - not wireless.
View 6 Replies
View Related
Mar 24, 2011
Fresh installed Fedora 14, I need to make install the NIC driver from source. I downloaded rpm files for kernel-headers, kernel-devel, perl and perl-libs. Trying to install them, Perl asks for perl-libs and a few other lib files. And perl-libs ask for perl D:
how to off-line install perl?
View 2 Replies
View Related
Jan 4, 2010
I have problem after install opensuse 11.2 on lenovo R61. I have no connection to internet, although on liveCD (opensuse 11.2) is internet connection functional. In ubuntu or opensuse 11.1 was all OK, connection was functional.- at DSL Configuration / Ethernet Card is Unknown device- in hardware is Card: 82566MC Gigabit Network Connection (eth0)- modprobe wl write it FATAL: Module wl not found.
View 9 Replies
View Related
Oct 11, 2010
So I have installed Ubuntu on my desktop, I have a wireless card that I know works w/ ndiswrapper and the INF/sys files I have, but I have no way of getting connecte to the internet (Ethernet requires and update) . So, My question is, Can I install Ndiswrapper w/o an internet connection (maybe put it on a CD or Flashdrive?).
View 3 Replies
View Related
Apr 29, 2010
Sir..I tried Gentoo x86: iso Minimal CD and Universal CD but both after booting from CD-ROM at one stage are stopped and asking for network set-up.But my net is not getting connected in this Gentoo installation.I am from India my network connection is of DSL type. So I request You to kindly tell me a way to install Gentoo without any network connectin(Internet).And also tell me which ISO I have to download for this purpose.
View 1 Replies
View Related
Apr 17, 2010
I posted this question in the linux mint forum but now thinking it may have been better to post it here, rather than duplicate the thread, ill just link to it.
http://www.linuxquestions.org/questi...23#post3938723
View 2 Replies
View Related
Feb 11, 2011
how to install yum in RHEL 5 I want to install yum with internet connection I tried to install by FTP but I'm getting problem of RHN...
View 1 Replies
View Related
Mar 28, 2010
Does anyone know how to install Firefox Add-Ons without an Internet connection? I need to install Firebug on a Slackware 13 machine that's not connected to Internet
The version of Firefox is 3.5.2.
View 3 Replies
View Related
