Debian :: BSD Kernel - Internet Connection?
Feb 10, 2011what do u feel now on ur Debian 6? did any body tried debian 6 BSD kernel? i use now ubuntu but i want to try Debian but due to internet connection problem
View 14 Replies
ADVERTISEMENT
Debian :: Updating The Kernel Without An Internet Connection?
May 19, 2011I recently installed Debian "Squeeze" onto a Thinkpad T420, alongside Windows 7. During the installation Debian was unable to detect my NIC (Intel 82579LM), but otherwise the installation completed normally. I've installed the required e1000e drivers, and added "alias eth0 e1000e" to the modules file. Using lspci I can see that the computer detects the card, but still fails to load the drivers for it.
I'm at a bit of a loss, as this is my first time using Linux. After a bit of searching it looks like the 2.6.38 kernel resolves the issue with this card, so I guess that's my next step.Unfortunately all the installation instructions I've found assume an internet connection.Is there a simple way to update the kernel without a connection, or -even better- an install disc with 2.6.38 so I can start from scratch?
Debian Configuration :: Connection WPA Personal Says Connected To Wl Network But No Internet Connection
Apr 15, 20111 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
Ubuntu Installation :: 10.04 - Installing Kernel Without Internet Connection
Nov 26, 2010I have Ubuntu 10.04 on my PC but I do not have access to internet (I have an Acer 3610 and before to install NDSI wrapper I have to install a Kernel). I have the most recent Kernel available on my external hardrive. I do not know how to use sudo command to install it.
View 1 Replies View RelatedUbuntu Networking :: Use Internet Connection From LAN To Share Internet Connection Through Wireless?
Jan 9, 2011I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedDebian :: No Internet Connection / Network
Sep 26, 2010I am working on a cross-platform application for Linux ,Apple and Windows, so I have a full tower system with four SATA hard drives that be selected with a switch, so that I can change drives and operating systems at will. -sort of makes me a jack of linux systems, but master of none.It's important to mention this, because it shows the strangeness of the problem as it is isolated to Debian* systems.
So where does debian/ubuntu get it's information to establish a network connection?How do I rectify the problem? I can hardly blame the hardware (RTL8111B), because the problem is isolated to Debian systems.
Debian :: Net-install Cd Without Internet Connection?
Aug 7, 2011I am planning to install debian in my pc,.I have xp in one partition and want to install debian in 4gb partition (+500mb for swap).PC: intel p4, 3.0ghz, 1gb ram i install debian from net-install cd without internet connection? If so, after installing the cd can i connect to internet using my usb modem (T-mobile/Huawei modem UMG1831). In case of ubuntu i heard of an app to switch the device between mass storage and modem. How in Debian?
View 1 Replies View RelatedDebian :: Updating A Pc With Debian Without Internet Connection?
May 6, 2010I have a pc with debian lenny, this machine doesn't have internet connection, when I need a new package I installed it with dpkg, updating phyton I got some broken dependences and some services doesn't work properly. I have another pc with debian lenny that is updated, my question is: what is the process to extract the packages downloaded in the pc-B, and create a mobile repository?
View 1 Replies View RelatedDebian :: How To Block Internet Connection When VPN Fails
Oct 21, 2013I am running Debian on my server (OpenMediaVault) and i am connected to a VPN service, using openvpn. BUT! How do i make sure that the internet connection, stays through my VPN service, or gets blocked, if the connection through the VPN tunnel fails? Jeah, yeah call me paranoid..
I have read this: [URL] ....
I don't know how i use the source code. Is there a script somewhere i can just download? And i don't want the LAN connection to be blocked.. only outgoing traffic!!
Debian :: Internet Connection Dies After Suspend?
Jan 31, 2010I followed this guide for my Acer Aspire One A150, and got wireless and suspend working fine:[URL]pendtoRAMThe only problem is that wireless is dead after resuming from suspend. I have to type:/etc/init.d/networking restart and after that everything works just fine and I get internet again.Is there a way to automate that process on resuming from suspend, so that I won`t have to type it manually each time?
View 4 Replies View RelatedDebian Installation :: How To Check Internet Connection From CLI
Oct 29, 2014freshly installed Debian-netinst, configured internet connection. Pinged Google - all transmitted packets were received, 0% loss.
Yet I am not sure if I have internet connection for what ever package I am trying to install using apt-get install package_name, I receive
E: Unable to locate package package_name
How can I check internet connection from CLI?
Debian :: Can't Get Wired Internet Connection After Reboot
Oct 25, 2015I have been using this fresh Debian 8.2 install for 3 days without any network problems.
What I did this morning :
- Booted in my windows partition and rebooted immediately just to remove the system from the sleep state
- Mounted a NTFS hard drive and copied some file to my .wine drive_c
Thats when I noticed that my connection was down.
I verified all the physical layer. My laptop has access to the internet tried to connect on an another router with eht0, changed the wire, nothing worked.
It seems like the interface can't get a dhcp ipv4 address even when I try to force is with dhclient, I get no offer when my laptop works just fine.
- Booted on my windows partition without changing any connection and my internet was working.
- Booted back on debian still not working...
Debian :: Why Only Root Has Internet Connection And Other Users Don't
Jan 12, 2016When launching any program (iceweasel, ssh, dropbox) that requires internet connection as a normal user it does not connect.
However if I try launching them as root it does. Sometimes, I have to manually disable/enable wifi and then reboot in order to access Internet, sometimes it works and sometimes it does not.
I have Code: Select all3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14) x86_64 GNU/Linux
My resolv.conf has the following permissions
Code: Select allsudo ls -l /etc/resolv.conf
-rw-r--r-- 1 root root 26 Jan 12 05:03 /etc/resolv.conf
My Code: Select allsudo lspci is
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
[Code] .....
Debian Configuration :: No Internet Connection After Reboot
Feb 20, 2016I rebooted my vServer (Debian 8) and it doesn't came back up. Well, I used the rescue console on my server and the server seems to be running fine, except the network was broken. So I tried 'ifconfig' but nothing came up. So I tried to enable my interface with 'ifconfig venet0 up', and now it appears in my ifconfig list
Code: Select allroot@i67svof:/var/www# ifconfig
venet0Â Â Link encap:UNSPECÂ HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00Â
     UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
     RX packets:557 errors:0 dropped:0 overruns:0 frame:0
     TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:0
     RX bytes:36463 (35.6 KiB) TX bytes:0 (0.0 B)
My HWaddr doesn't look that well :) 'ip addr' prints this result:
Code: Select allroot@i67svof:/var/www# ip addr
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
These are the last lines in /var/log/syslog:
Code: Select allroot@i67svof:/var/www# tail /var/log/syslog
Feb 20 11:34:16 i67svof systemd[1]: Stopping memcached daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Network Name Resolution...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Regular background program processing daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Login Prompts.
[Code] .....
And finally my network config in /etc/network/interfaces
Code: Select all# Auto generated lo interface
auto lo
iface lo inet loopback
# Auto generated venet0 interface
auto venet0
[Code] .....
Debian :: Whenever Boot - Internet Connection Kicks In Automatically
May 9, 2011I've installed Debian squeeze using the net installer and while beginning the installation I loaded the 'ppp-udeb' module to connect to the internet for accessing the Debian mirrors during the installation. Now, whenever I boot into Debian, internet connection kicks in automatically. I would want to have control over when to start the internet connection. I don't want it to be triggered during my login.
View 2 Replies View RelatedDebian Configuration :: New Internet Connection Have No Public IPV4
Aug 17, 2015In one of my customers, the new internet connection have no public IPV4(using GCNAT), only public IPV6.
And there are various services that require external access, like, vpn (openvpn), a java/web system, ssh, rdp(windows).
fileServer(by vpn).
All is running ok in IPV4.Maybe, the solution is a NAT 6to4. We know this is the future, no more public IPV4.
Debian Configuration :: Openvpn And Internet Connection Lost
Oct 29, 2010When I make a vpn connection to an openvpn server, I loose the internet connection.
The VPN works all right.
Server config (extract)
Client config
Client route without the VPN connection
client route with VPN connected (internet lost)
Is there anything I can do to the push rule of the servers's config file?
Debian Configuration :: Unable To Connect To Internet Connection
Apr 15, 2011I am using Empathy IM client to access to gadu gadu and to message with my friends. The strange thing that is happening is that I keep on being connected and then disconnected and then connected again even if I am continuously connected to my internet connection (no problem when surfing or using skype for example)It also seems to come only from me because when my girlfriend is using the same gadu gadu on her windows laptop simultaneously, she doesn´t get disconnected (whether when she is at home and using the same connection as I am or when she is outside, meaning that it doesn´t seem to come from the whole gadu gadu network)maybe it has something to do with the ports that gadu gadu is using but it is strange that sometimes it is working for a period of time and then not and then again.
View 1 Replies View RelatedDebian Configuration :: Cannot Configure Internet Connection Via Terminal
Aug 13, 2011I have just installed Debian Squeeze on my spare computer (dual booted with Ubuntu 11.04) and I cannot connect to the internet using Squeeze. Due to my ISP, I have to manually connect this computer and on Ubuntu copying and pasting a text file such as this into the terminal works with no problems.What do I need to do to manually configure my Squeeze internet connection?
View 5 Replies View RelatedDebian Configuration :: Swapped Mobo And No Internet Connection / Get That?
Aug 31, 2011I replaced my motherboard and processor but am keeping my old hard drive without reformatting it. Things work well except that I cannot connect to the internet. I am thinking that I just need to reconfigure the connection to see the new network hardware. I tried /etc/init.d/networking restart but that doesn't do anything. What am I missing? By the way it is a wired connection - not wireless.
View 6 Replies View RelatedDebian :: OpenVPN And Loose The Basic Internet Connection In The Browser
Sep 6, 2011I have succesflly installed OpenVPN server and clients(followed tuts). Everything is great, however when I have openvpn connection established on the clients I loose the basic internet connection in the browser, but my clients can see the vpn server(even I can ssh to the server via the openvpn client ip). I am guessing that all the traffic is routed through the server. I am just not knowledgable enough with routing , iptables and internet sharing. I am using tun based setup on OpenVPN. I am just not even sure if this is a server or a client issue, sorry for ignorance and illeteracy.
View 5 Replies View RelatedDebian Installation :: WiFi Connection Visible But No Working Internet
Oct 22, 2014I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...
View 14 Replies View RelatedDebian :: Setting Up Internet Connection On Dual Boot System
Dec 14, 2010I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies View RelatedDebian Configuration :: Update Testing Killed Internet Connection?
Jul 5, 2011AMD 64 Upgrade to testing last night killed my internet connection. The lan works, I can ping the dns server from my IP, however no mail, browser possible. Is something in testing broken again?
View 5 Replies View RelatedDebian Hardware :: Load Firmware For BCM Card With No Internet Connection
Jun 19, 2014I performed an update that has caused issues with my wireless. Errors relating to wireless firmware missing and consequently no internet connection.
I've been through this before with my 2008 macbook air BCM card whose firmware isn't included in installs. In the past I've manually installed the b43-fwcutter package an extracted some firmware... That doesn't seem to be working here.
I've used [URL]i ... cefirmware to troubleshoot. I have not been able to get b43 or wl to work.
I attempted to install the "firmware-b43-installer_015-14.1_all.deb" package; however it depends on wget to download and install "broadcom-wl-5.100.138.tar.bz2" from wlfinger.com.
So I manually installed b43-fwcutter and used it to extract the broadcom-wl-5 file referenced....
modprobe wl says wl doesn't exist and modprobe b43 doesn't seem to work.
Details:
Code: Select allname-a
Linux air 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux
lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 05)
Other things I've tried:
Code: Select allsudo dpkg -i broadcom-sta-dkms_5.100.82.112-8_all.deb
Setting up broadcom-sta-dkms (5.100.82.112-8) ...
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.2.0-4-amd64
Module build for the currently running kernel was skipped since the
kernel source for this kernel does not seem to be installed.
I tried something from broadcom that produced make errors "/lib/modules/3.2.0-4-amd64/build: No such file or directory"... I think this means I need some kernel development packages, broadcom says:
Code: Select allOn Fedora install 'kernel-devel' (Development Package for building kernel
modules to match the kernel) from the Package Manager (System->
Administration-> Add/Remove Software).
On Ubuntu, you will need headers and tools. Try these commands:
# apt-get install build-essential linux-headers-generic
# apt-get build-dep linux
I'm having trouble install this stuff without the net and not sure installing generic headers and build-dep outside of apt-get is the way to go... linux-headers-3.2.0-4-amd64_3.2.57-3+deb7u2_amd64.deb has alot of dependencies that would take me a while to find and download.
Debian Configuration :: Unstable Internet Connection Squeeze - Realtek Adapter
Jul 14, 2011I'm going to start using Debian as my desktop system rather than Ubuntu since I'm not really liking all the crazy eye candy and just wanted a fast and simple system. My main problem is networking, I guess I'll start off with my system specs and other information for problem solving.
My specs are:
- Intel Core i7 2600K CPU
- Gigabyte Z68X-UD3P-B3 Motherboard
- 8GB DDR3 1600Mhz RAM
I have a Realtek RTL8111/8168B Ethernet Adapter builtin to my motherboad which I am using, I could only get a basic connection, by basic I mean that it allowed me to connect to my local area network but not the internet. I then modified /etc/NetworkManager/NetworkManager.conf to change to managed=true this allowed me to use the internet, but the problem is, that it is a very unstable connection, the speed is very slow and it drops a lot! I have to carry on running /etc/init.d/network-manager restart twice to get my connection back, which lasts for about a minute.
output of lspci | grep -i eth
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Output of cat /var/log/dmesg | grep -i eth
[ 1.414250] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.415080] eth0: RTL8168b/8111b at 0xffffc90000c7c000, 1c:6f:65:c5:7c:34, XID 0c900800 IRQ 31
[ 9.213351] r8169: eth0: link up
[ 9.213392] r8169: eth0: link up
[ 13.813496] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Debian Configuration :: NetworkManager Doesn't Show (working) Internet Connection / Sort It?
May 14, 2010I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.
Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).
Software :: Internet Connection - Fluent Under Debian Connects And Disconnects Repeatedly At Short Amounts Of Time
Aug 2, 2010Though under Windows my Internet connection works fine and fluent under Debian linux it connects and disconnects repeatedly at short amounts of time. It didn't used to be like that but at a certain time i was forced to install pppoeconf to get my DSL internet connection going, after that even if i've uninstall pppoeconf and now i'm only using nm-applet to monitor my internet connection i still have this annoying problem.
View 1 Replies View RelatedDebian Configuration :: Networking - Netinst CD - Internet Connection Only Works After Edit The Interfaces And Resolv.conf Files Manually
Aug 3, 2010I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies View RelatedUbuntu Networking :: Wireless Network Connection Active But Still Not Internet Connection?
Jan 24, 2010Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....