Debian :: Resizng Partition LVM Partitioning
Oct 18, 2010/home is running out of space, the partition on my computer is LVM, any software like Partition Magic etc to handle it? If doing from command line, any know of any tutorial?
View 6 Replies
ADVERTISEMENT
General :: Partitioning - Copy GNU Installation From A Smaller Partition To A Bigger Partition?
May 4, 2011I got a new hard disk for my laptop and I want to move my Gentoo installation from old HDD to new.
Most simple guides recommend use of dd to copy the whole partition byte by byte.
I'm moving to the new drive because I don't have enough space on the old drive, so I don't want to simply clone the partition. Instead I need the destination partition to be bigger. Would dd work well in that case?
Assuming that I use same partition types on the new drive, would I be able to use simple cp with appropriate settings?
CentOS 5 :: Gpt Partitioning - XFS \ Error, That Boot Partition Is On A Gpt Partition And This Machine Cannot Boot That?
May 21, 2010I am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
View 1 Replies View RelatedGeneral :: Partitioning: How To Remove A Partition From A Volume
Feb 8, 2010When I recently installed Redhat onto my system, I had 2 hard drives in it, and apparently the default usage for the two hard drive is to put them all into 1 volume, so now I have files scattered across both hard drives (with boot on /dev/sdb). LVM won't let me remove the /dev/sdb partition due to not enough room in volume or whatever. What is the easiest way to shift everything, including the boot partition, onto one hard drive so I can remove the other one without reinstalling everything?
View 2 Replies View RelatedGeneral :: Partitioning - Trim / Discard A Whole SSD Partition?
Jul 8, 2011My partition /dev/sda3 on an SSD drive doesn't contain any filesystem, but it contains garbage. How do I do a TRIM/DISCARD operation on the whole partition?
View 2 Replies View RelatedGeneral :: Partitioning - How To Recover NTFS Partition ?
Jul 21, 2011I've formated partition to empty - only erased information that partition is NTFS.
Partition data haven't been changed. So i think only little change to partition table is required.
How can i recover it?
Ubuntu :: Partition Tools - Build In Partitioning Application
Jan 23, 2010Do Ubuntu have a build in partitioning application. What is the name this application and where is it located?
Also is it possible to create or resize other (out-side) partitions from my Ubuntu partition? I have a 1000GB drive and Ubunta now has the first 100GB. I want to work with the other 900GB of disk space useing the partiton tool from WITH-IN Ubuntu while running, if possible.
What is the name of this tool and where is it. Are there more than one partitioning tools inside the latest version of Ubuntu?
Ubuntu :: Partitioning Attempt In Win 7 Resulting In No Recognition Of Partition?
Jan 5, 2011Allow me to preface this post with fact I am 80 and the PC challenges seem to be greater and comprehension a major focus. I just finished a 12 hour recovery on due to this new Toshiba Satellite not recognizing the partition I created with gparted.
The out of the box configuration is unallocated 100 Mib, sda1 NTFS System Boot, sda 2 NTFS WOG with 286'59 GiB, sda3 NTFS Recovery. IIts scary for me to attempt it again but I will try given some clear directions. An option would be my 149 GB external formatted with EXT 3 file system
Fedora Installation :: F12 Partitioning - Create A Custom Partition Layout?
Nov 29, 2009I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.
I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.
How do I install F12 and tell anaconda exactly which partitions I want to use and format?
My current working partition layout is shown in the attached screenshot.
I want to use the following custom partition layout during the initial F12 installation:
Code:
/dev/sda2 / Fedora-12-root
/dev/sda3 SWAP
/dev/sda11 /var/log/ var-log
/dev/sda12 /tmp tmp
This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.
The other partitions with data on will be mounted when the intiall installation has been completed
Fedora Installation :: Default Partitioning And Size Of Temp Partition?
May 12, 2010I use Fedora 12 AMD64 and I partition my HDD with Default partitioning what happen when temp partition is full by files ?Can this happen ? for example my temp partition full by files and my system can not use temp partition .!can I say my Fedora clear temp after each reboot .?
View 5 Replies View RelatedGeneral :: Partitioning / Perform Bad Blocks Scan On Root Partition
Nov 28, 2010My root partition is formatted as ext3 and I would like to perform a bad blocks scan on it. Normally e2fsck -c -c does this, but you can not run it on a mounted partition. I know it is possible to force a fsck to run at boot by creating the file /forcefsck but is it possible to specify that it should also check for bad blocks? If not, what is the recommended way to check for bad blocks on the root partition? I would like to avoid having to create a rescue disk and boot off of it.
View 2 Replies View RelatedUbuntu Installation :: Optimal Partition Scheme - Manually Partitioning HD?
Apr 9, 2010I am a total noob for Linux / Ubuntu. I have been using windows all my life and I decided to get rid of Bill finally. I want to install Ubuntu by Manually partitioning my HD. I have a 500GB HDD. optimal partition scheme. I repeat i am a total Noob. please let me know details for each partition like
1. Primary or Logical
2. type
3. mount point
4. size
I am having no other OS in the pc. just planning to have ubuntu. no dual boot needed.
General :: Partitioning - Install Mint 11 To Small Partition On Large USB Drive
May 12, 2011I want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
Ubuntu Installation :: Installer Partition 10.10 - Hangs When Select Manual Partitioning
Oct 14, 2010I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
Ubuntu Installation :: Partitioning For Dual Boot-- Windows Is On An Extended Partition - Other Weirdness??
Jan 9, 2011I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
Ubuntu Installation :: Dual Boot Partitioning \ What File System Should Use For Windows Swap Partition
Sep 1, 2011I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies View RelatedDebian Configuration :: How To Best Manage Partitioning When Install Programs Not From Debian Repositories
Dec 4, 2010How to best manage partitioning when install programs not from debian repositories?I just discovered that Debian installs applications not from repositories to /opt and /lib. Both directories or folders reside in root (/) partition.Having made my root (/) partition (which is only around 500MB) -- more than sufficient for holding a couple of linux images but NOT good for holding application.What is the best solution for resolving this? It's annoying and worrying that my system always reminds of a close to full capacity root partition.
View 7 Replies View RelatedDebian :: Partitioning For 2 OS's ?
Oct 30, 2010Q:How to set a Dual boot for 2 linux OS's on a 80GB HD? I have 5 Lenny 5.0.5 DVD's and that is currently installed. No data on current setup needs to be saved. So a reinstall is not a problem.
Would like to set up as follows:
1st OS permanent Lenny 5.05 (about 50GB).
2nd OS space (about 30mg) is (testing) or playing with CD/DVD's of the month.
My background: I did S/W development on the HPUX about 100 yrs. ago, so I can just get around the command line.
Debian :: Partitioning The HD During Installation?
Dec 15, 2010I am trying to install Debian Lenny on my iMac. When the installer menu comes to the partitioning scheme, I have no choice other than "manual partitioning".
Based on what I have read so far, I think I need to have at least two partitions:
- a root partition (/) but for how much space I am not so sure yet
- a swap partition equal to the amount of my RAM (which in this case is 2 GB DDR3): is this correct?
I wonder if I should furthermore make a "free space" (around 1 GB) and a boot partitions as well. Should I make any further partitions?
I want to devote some 50 GB of space to Debian so how the rest of this space should be partitioned: that is, when I am done with root, swap, free space, and boot, I am still left with a considerable amount of space.
CentOS 5 :: Boot Partition Is On A Disk Using The GPT Partitioning Scheme But Machines Cannot Boot Using GPT?
Jun 27, 2011I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies View RelatedDebian Installation :: Partitioning Scheme For GPT On A SSD
Sep 23, 2014I have a Intel DH67CL motherboard with UEFI support(and updated to latest BIOS). I have connected a 180GB Intel 330 SSD into my system so as to install Debian testing.
Presently, a 160GB sata hard drive is connected along with SSD and is used to boot default OS.
1. I am planning to do GPT partitioning. I am totally new to GPT partitioning. from what I understands, It needs some mandatory partitions like ESP. My doubt is, in a SSD solely booting Linux, will I need to create separate /(root) and /home and /data partitions? Also, I plan to use /var/log and some other frequently updated directories moved into existing harddrive.
So, what is the partitioning order - is this fine - ESP(512MB), /boot(100MB), /(30GB), /home(50GB) and /DATA(50GB) and remaining 16-17GB for over provisioning for the SSD?
2. is there a need to have 128MB MSR(microsoft reserved) in the case of Linux
3. With gdisk or parted for creating partitions? how to verify if partitions are aligned. In GPT, only primary partitions are supported?
4. Some answers in askubuntu/superuser says ext4 is not really good for SSD, instead take JFS? is this true? Is Btrfs mature enough to use with Desktop system
5. Which bootloader? gdisk creator Roderick is pushing for rEFInd or gummyboot instead of GRUB2.
6. In my PC, 4GB RAM is available with a core i3 processor. Shall I mount /tmp in RAM? Will I need to specify the size of RAM when mounting using /etc/fstab? A size of 1GB is fine?
7. using deadline I/O Scheduler instead of CFQ?
Debian Installation :: Partitioning Fails During Install?
Feb 11, 2011So I am helping a friend (computer n00b) to install Debian Squeeze over the telephone, since his Vista had crashed, and after we set up the partitions like so:9 GB /1GB swap 150 GB /homeIt "hangs" for a while, i.e. nothing happens, and then it says that it "failed to partition disks". It did not give any error codes, and I did not see the message first hand, since I was doing it over the phone, but I was thinking that there is something wrong with the hard drive (causing Vista to crash perhaps?) so could this be circumvented by just using the first (or last) 10-15 GB of the disk?
View 7 Replies View RelatedDebian Installation :: Partitioning Fails On Sun Ultra 450?
Apr 3, 2011So, I've got as far as partitioning the hard disks on my Sun Ultra 450 Enterprise system, but it always fails with:
SILO (Sparc Linux Loader) can only boot the kernel off of a disk with the "sun" partition table. In the current partitioning scheme the kernel is going to be installed on the /boot partition located on a disk with the partition table of type "msdos".
What is this error message trying to say in its ambiguous way?
I selected automatic partitioning, but it got me to the same place as manual partitioning before it failed in the same way.
I installed four used hard drives in this system - they may have come from PCs for all I know. However, they are SCSI SCA drives, which makes it hard for me to believe they came from a PC environment.
If they did, do I need to to a low-level (or high-level) format of these drives to wipe out the "msdos"ness of them? If so, how do I do that in the SILO installer?
Debian :: Installation Freezes During Disk Partitioning?
Apr 5, 2011This has now happened with 3 computers. I boot the i386 iso on a usb stick and I enter my name fine and create an account with a password, and then after the time is checked, the installation gets halfway through the hard disk bar and then suddenly it freezes. Sorry if i'm a little unspecific, I've forgotten what the name of the process was exactly and I don't want to have to try again if unnecessary.
View 2 Replies View RelatedUbuntu :: Partitioning A 1TB HD With A "storage Partition"?
Feb 26, 2011My last HD recently got fried, so I'm installing on a new one... (or maybe I used fsck on it because it had so many bad sectors, and now it wouldn't boot anymore).I want to make 3/4 of the drive for general storage and the rest for the OS (10.10). It would look something like this:
Code:
/dev/sda...
...
[code]....
Debian :: Libgdu-WARNING : Partition /org/freedesktop/UDisks/devices/sdb7 Is A Logical Partition But No Extended Partition Exists
May 27, 2011I installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
Debian Installation :: IMac G3 - When Partitioning The HD - Just Shuts Down And Restarts From The Beginning
Jul 31, 2011I have downloaded the latest version of Debian for PPC to run on my iMac G3 600MHz 1GB ram. The problem is, is when it is partitioning the HD the computer just shuts down and restarts from the beginning. I don't understand this. I chose it to erase and use the entire disk. The HD is 80GB. I really want to install this OS!
View 6 Replies View RelatedDebian :: Manually Partitioning And Formatting Large Hard Disk
Jan 5, 2016What is the recommended method these days for command line partitioning and formatting for the Terabyte size hard disk.?
It was easy to keep up when your working or have access to hardware for re-purposing, but that has all dried up and my knowledge has been left behind. The problem(s) are with new, recent hardware
Following a crash from a now detectable faulty stick of RAMM, I've lost one of my data hard disks and my fiddling with replacement seems to leave various errors/warnings mainly about GPT not supported and this message is still present despite trying fdisk, cfdisk, gpart, gparted, and(?).
System is an ASUS mobo using SATA drives (root 500Gb: MBR+3 partitions;/, swap, /home), and two 2.4TB with single partitions.
Debian Installation :: Disk Partitioning Consistently Triggers Computer Restart
Jan 3, 2016I'm trying to perform a clean installation of 8.0.0-i386 from a CD. Seven consecutive attempts all result in the same issue: Almost immediately after commiting the disk partitioning settings (i.e., to begin formatting), the computer does a hard restart. I have tried doing the partitioning as early as possible in the installation process, just in case the system is running out of memory; I have also tried using the lowmem option. I suspect the problem may be related to my very old hardware...
Micronics serverboard 440BX chipset*
Dual Pentium II 450MHz CPUs*
1GB ECC RAM*
Adaptec AHA-2940UW SCSI adapter
IBM Ultrastar 36GB UW-SCSI HDD
ATAPI CD-ROM
Matrox G100 AGP video card*
*starred items are all original parts from an Intergraph server with validation/verification stickers attesting to their intercompatibility
No POST errors, the HDD passed verification using the Adaptec ROM utility, all unnecessary hardware removed
Could it be that I need an older release or some custom-compiled kernel? The only thing I could come up with on the web was that a lot of people have a similar failure with modern distros on non-PAE CPUs, but the P-II should not be susceptible to this problem.
Debian Configuration :: Partitioning The Four Individual Drives To Get Maximum Performance / Space From Them?
Jan 25, 2011I've got 4 identical 1 TB drives and would like to use them in a software RAID configuration on my home server. I'm running Debian Linux using 'mdadm' utility to manage the software RAID. I don't know how much I've read is fact or dated or even false so I decided I would ask here to get help from people who know more about this than I do. This is essentially just a file server machine to store all my data so being that I've got four identical SATA hard drives, I was thinking about doing RAID level 5. I guess I'll start here and ask if that is the recommended level of RAID. I think RAID level 5 will be fine for my general server usage. My second issue is partitioning the four individual drives to get maximum performance / space from them. Basically just asking here how would you or you recommend I partition the drives? I was thinking about doing three seperate partitions per drive:
/dev/sda1 = 4 GB (swap)/dev/sda2 = 1 GB (/boot)/dev/sda3 = 995 GB (/Now from that partition schema above, obviously all the types will be 'fd' for RAID and the partition for /boot is going to be bootable. My confusion is that I read Grub doesn't support booting from RAID 5 since Grub can't handle disk assembly. If /dev/sdx2 (sda2, sdb2, sdc2, sdd2) are partitioned for /boot (bootable), how would you guys configure this RAID to match up equally? I don't think I do a RAID level 1 on 4 identical partitions, right?
