General :: Partitioning: How To Remove A Partition From A Volume
Feb 8, 2010
When I recently installed Redhat onto my system, I had 2 hard drives in it, and apparently the default usage for the two hard drive is to put them all into 1 volume, so now I have files scattered across both hard drives (with boot on /dev/sdb). LVM won't let me remove the /dev/sdb partition due to not enough room in volume or whatever. What is the easiest way to shift everything, including the boot partition, onto one hard drive so I can remove the other one without reinstalling everything?
View 2 Replies
ADVERTISEMENT
May 4, 2011
I got a new hard disk for my laptop and I want to move my Gentoo installation from old HDD to new.
Most simple guides recommend use of dd to copy the whole partition byte by byte.
I'm moving to the new drive because I don't have enough space on the old drive, so I don't want to simply clone the partition. Instead I need the destination partition to be bigger. Would dd work well in that case?
Assuming that I use same partition types on the new drive, would I be able to use simple cp with appropriate settings?
View 1 Replies
View Related
Jul 8, 2011
My partition /dev/sda3 on an SSD drive doesn't contain any filesystem, but it contains garbage. How do I do a TRIM/DISCARD operation on the whole partition?
View 2 Replies
View Related
Jul 21, 2011
I've formated partition to empty - only erased information that partition is NTFS.
Partition data haven't been changed. So i think only little change to partition table is required.
How can i recover it?
View 1 Replies
View Related
Nov 28, 2010
My root partition is formatted as ext3 and I would like to perform a bad blocks scan on it. Normally e2fsck -c -c does this, but you can not run it on a mounted partition. I know it is possible to force a fsck to run at boot by creating the file /forcefsck but is it possible to specify that it should also check for bad blocks? If not, what is the recommended way to check for bad blocks on the root partition? I would like to avoid having to create a rescue disk and boot off of it.
View 2 Replies
View Related
May 12, 2011
I want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
View 1 Replies
View Related
Oct 18, 2010
/home is running out of space, the partition on my computer is LVM, any software like Partition Magic etc to handle it? If doing from command line, any know of any tutorial?
View 6 Replies
View Related
May 21, 2010
I am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
View 1 Replies
View Related
Aug 24, 2010
I installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
View 1 Replies
View Related
Jan 23, 2010
Do Ubuntu have a build in partitioning application. What is the name this application and where is it located?
Also is it possible to create or resize other (out-side) partitions from my Ubuntu partition? I have a 1000GB drive and Ubunta now has the first 100GB. I want to work with the other 900GB of disk space useing the partiton tool from WITH-IN Ubuntu while running, if possible.
What is the name of this tool and where is it. Are there more than one partitioning tools inside the latest version of Ubuntu?
View 5 Replies
View Related
Jan 5, 2011
Allow me to preface this post with fact I am 80 and the PC challenges seem to be greater and comprehension a major focus. I just finished a 12 hour recovery on due to this new Toshiba Satellite not recognizing the partition I created with gparted.
The out of the box configuration is unallocated 100 Mib, sda1 NTFS System Boot, sda 2 NTFS WOG with 286'59 GiB, sda3 NTFS Recovery. IIts scary for me to attempt it again but I will try given some clear directions. An option would be my 149 GB external formatted with EXT 3 file system
View 1 Replies
View Related
Nov 29, 2009
I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.
I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.
How do I install F12 and tell anaconda exactly which partitions I want to use and format?
My current working partition layout is shown in the attached screenshot.
I want to use the following custom partition layout during the initial F12 installation:
Code:
/dev/sda2 / Fedora-12-root
/dev/sda3 SWAP
/dev/sda11 /var/log/ var-log
/dev/sda12 /tmp tmp
This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.
The other partitions with data on will be mounted when the intiall installation has been completed
View 4 Replies
View Related
May 12, 2010
I use Fedora 12 AMD64 and I partition my HDD with Default partitioning what happen when temp partition is full by files ?Can this happen ? for example my temp partition full by files and my system can not use temp partition .!can I say my Fedora clear temp after each reboot .?
View 5 Replies
View Related
Apr 9, 2010
I am a total noob for Linux / Ubuntu. I have been using windows all my life and I decided to get rid of Bill finally. I want to install Ubuntu by Manually partitioning my HD. I have a 500GB HDD. optimal partition scheme. I repeat i am a total Noob. please let me know details for each partition like
1. Primary or Logical
2. type
3. mount point
4. size
I am having no other OS in the pc. just planning to have ubuntu. no dual boot needed.
View 2 Replies
View Related
Oct 14, 2010
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
View 7 Replies
View Related
Jul 27, 2011
I know this is a familiar looking question, but please hear me out.
I want to dual boot Fedora 15 with Ubuntu 11.04 (to try out GNOME Shell whilst not breaking Unity, which I quite like). As it's mostly to just to try out, I'll probably want to remove Fedora and go back to just Ubuntu, so I wan to ask how to remove the Fedora partition without doing any damage, and how to remove it from the GRUB menu at boot.
View 6 Replies
View Related
Nov 18, 2010
I have a hard disk that I would like to completely remove UBUNTU from. There is no other OS on it. UBUNTU is on all of the HD no unused partitions that I can see or other windows system here at all. I would like to completely remove UBUNTU and remove GRUB also. and be able to use this HDD for a windows system. Most of the threads I have read here in the forum relate to removing ubuntu from a dual OS HDD . There is talk of using partition magic or other utility to remove or change the partitions,but most of them are about a dual OS system, whereas I have an HDD with only ubuntu on it. Does UBUNTU have an uninstall program that I can download? Does partition magic remove the Ubuntu OS? Grub?
View 7 Replies
View Related
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
View 9 Replies
View Related
Sep 1, 2011
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies
View Related
Jun 11, 2011
I have 4 OSes installed:
Windows XP on sda1
Backtrack on sda5-6
Ubuntu 11.04 on sda7-8
Ubuntu 10.10 on sda9-10
I want to remove Ubuntu 11.04 (partitions sda7-8). I tried using GParted from Ubuntu 10.10, but it says that I have to unmount logical partitions with a number higher than the one being removed.
View 2 Replies
View Related
Nov 16, 2010
I'm trying to do a disk upgrade on some servers. They are using LVM with DRBD on top and each LVM volume contains a Xen image. I have already created identical volumes on another volume group, copied the data and pointed DRBD to the new source (Which seems to have worked).
What I am unsure of is how to safely remove the disks. The disks are an Areca Raid 1 array and support hotswap. Can I just pull them out of the machine or is some sort of command needed to tell LVM or the kernel to disconnect from the physical array device? Is removing the raid array from the Areca management GUI first a good idea?
View 3 Replies
View Related
Jun 4, 2011
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies
View Related
Apr 18, 2010
I currently have both Ubuntu 9.10 and Windows XP installed on my PC. I want to remove the Ubuntu partition and leave the Windows partition. The question that I have is that when I remove it, Grub will go with it. Will that mess up my Windows partition?
What I need to do is remove Ubuntu and add the hdd space back to the other partition. I just don't want Grub's absence to keep me from being able to load Windows.
View 5 Replies
View Related
Mar 9, 2010
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies
View Related
Nov 1, 2010
I was wondering if there is some ind of way of removing the rhythmbox link in the volume menu in the indicator applet..It's just that I hardly use it and it's pretty annoying and redundant as well having it there. I don't want to get rid of the volume menu completely nor of rhythmbox. I just want the link gone from there. Actually it never was there until I decided to open it once. After that day, it wouldn't go, no matter how I would exit the program. I didn't have this problem in 10.04. It's just in 10.10.
View 3 Replies
View Related
Dec 1, 2010
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies
View Related
Jun 13, 2010
Is it possible to remove evolution notification icon and stay only with volume control?I appreciate the effort made to integrate everything in 10.04, but it is not a really nice feature to me, since i do not like empathy and i hate evolution. I think ubuntu should put more effort in freedom and less effort in making people all obliged to use the same apps.
View 4 Replies
View Related
Jun 27, 2011
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies
View Related
Oct 18, 2009
can we use partition typ 83(linux) for creating a LVM partition.
View 2 Replies
View Related
Feb 26, 2011
My last HD recently got fried, so I'm installing on a new one... (or maybe I used fsck on it because it had so many bad sectors, and now it wouldn't boot anymore).I want to make 3/4 of the drive for general storage and the rest for the OS (10.10). It would look something like this:
Code:
/dev/sda...
...
[code]....
View 9 Replies
View Related
