Fedora Installation :: Default Partitioning And Size Of Temp Partition?

May 12, 2010

I use Fedora 12 AMD64 and I partition my HDD with Default partitioning what happen when temp partition is full by files ?Can this happen ? for example my temp partition full by files and my system can not use temp partition .!can I say my Fedora clear temp after each reboot .?

View 5 Replies


ADVERTISEMENT

Fedora Installation :: F12 Partitioning - Create A Custom Partition Layout?

Nov 29, 2009

I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.

I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.

How do I install F12 and tell anaconda exactly which partitions I want to use and format?

My current working partition layout is shown in the attached screenshot.

I want to use the following custom partition layout during the initial F12 installation:

Code:
/dev/sda2 / Fedora-12-root
/dev/sda3 SWAP
/dev/sda11 /var/log/ var-log
/dev/sda12 /tmp tmp

This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.

The other partitions with data on will be mounted when the intiall installation has been completed

View 4 Replies View Related

Ubuntu Installation :: Minimum Disk Size For Automatic Partitioning?

Dec 23, 2010

I want to create several virtual machines based on a minimal (no GUI) Ubuntu installation. I'm using VirtualBox (on Windows 7), the VMs are being created with 256MB RAM and using the Ubuntu Minimal CD Image [URL]. Because I want 4-5 of these virtual machines I want to use minimal disk space for storage too, which means restricting the virtual hard disk size for each. My first attempt was to limit it to 300MB, but when I got to the partitioning section of the installer it would not allow me to do automatic partitioning and forced me to do manual partitioning, it did moan about the size of the disk.

So I started again with a 1GB virtual hard disk, this time the installer was quite happy to do the automatic partitioning. My question is how small can I make my virtual hard disk without having to do manual partitioning? I don't have a problem with doing the partitioning manually but for easiness I just want to do it automatically and find it strange the acceptable size isn't mentioned anywhere (that I could find).

View 1 Replies View Related

General :: Partitioning - Copy GNU Installation From A Smaller Partition To A Bigger Partition?

May 4, 2011

I got a new hard disk for my laptop and I want to move my Gentoo installation from old HDD to new.

Most simple guides recommend use of dd to copy the whole partition byte by byte.

I'm moving to the new drive because I don't have enough space on the old drive, so I don't want to simply clone the partition. Instead I need the destination partition to be bigger. Would dd work well in that case?

Assuming that I use same partition types on the new drive, would I be able to use simple cp with appropriate settings?

View 1 Replies View Related

OpenSUSE Install :: Default Root Partition Size For 11.2 - Too Large?

Jan 28, 2010

When I installed opensuse 11.2 64-bit (KDE) the installer set the root partition to 20GB by default. That seemed unnecessarily large, so I reduced it to 16GB. I then completed the install (basically a default KDE install minus games & educational stuff) and still had more than 8GB free. I'm aware that these days hard drive storage space is quite cheap, but it's not so cheap for me as I have an SSD. Would it not be reasonable to reduce the default root partition size to 12GB, or perhaps vary it according to the software package load selected?

View 3 Replies View Related

Fedora Installation :: Possible To Increase Size Of Partition That Is Using LVM?

Jul 2, 2009

Is it possible to increase the size of a partition that is using LVM?I have 5GB of unpartitioned and unallocated space on my disk. I wish to add this to my VG. This free space is physically before the LVM partition.Can I increase the size of the physical partition using pvresize? Or is the only way to to create a new 5GB partition, add it to the VG and allocate it to the LVs? This is not ideal as I wish to minimise the number of partitions I have on the one disk.

View 1 Replies View Related

OpenSUSE Install :: Quick Query About Default Root Partition Size?

Sep 14, 2011

I'm dual booting with Win Xp at the moment and have been google-ing and tinkering about with my distro and i'm learning new stuff everyday but I have a question about something that's been bothering me. I think i've figured out that the / partition is similar to the C: Drive in windows which contains program files n stuff am i right? and the home partition which contains users and their files is an offshoot of the root?

So if this is the case, i was in the expert partitioner in YAST to see how the the drive was partitioned and was wondering if the / partition was too big and if i could decrease the size and add it to the /home?. My sys specs are 512mb RAM Dell Dimension 3000 with an 80GB HDD 2.8Ghz Intel Celeron. I also have a 80Gb and 160Gb External laptop drives mainly for my movies n music n stuff. Also is the Swap partition a good size for the spec of computer i have?

Here's the HDD Breakdown:

/dev/sda 74.51GB
/dev/sda1 29.52 GB NTFS /windows/c
/dev/sda2 44.99GB Extended

[code]....

View 9 Replies View Related

Fedora Installation :: Partition Size After F14 Install With Resize Option

Apr 11, 2011

I've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:

# fsck /dev/sda6
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
The filesystem size (according to the superblock) is 15360000 blocks
The physical size of the device is 15359895 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes

# dumpe2fs /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
# dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
Same thing for all the other backup superblocks I've tried.
# echo '15360000 4 * p' | dc
61440000
# fdisk -s /dev/sda6
61439583

Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.

View 1 Replies View Related

Fedora Installation :: Recommendation (e.g. Size) For Hard Disk Partition Allocation?

Nov 4, 2010

I want to add Fedora 14 to my triplecore 3GB RAM computer which has windows, Fedora 12 & ubuntu installed. What are the recommendation (e.g. size) for harddisk partition allocation? I can reuse the swap partition, can't I? Should I install Fedora 14 to a single partition (ie. /)? Should I use only ext4?

[Code]...

View 1 Replies View Related

General :: How To Find Size Of Flash File Not Stored In Temp

Apr 8, 2011

How to find the filesize of a flash which is not exactly stored in the temp but redirected by a fd.
flash31 -> /tmp/FlashXXvsg1uY (deleted) directory is /proc/processid
Chrome is downloading a flash and I can see in the proc directory the flash file, How can I see the current file size of such a file ?

View 1 Replies View Related

Ubuntu Installation :: Optimal Partition Scheme - Manually Partitioning HD?

Apr 9, 2010

I am a total noob for Linux / Ubuntu. I have been using windows all my life and I decided to get rid of Bill finally. I want to install Ubuntu by Manually partitioning my HD. I have a 500GB HDD. optimal partition scheme. I repeat i am a total Noob. please let me know details for each partition like

1. Primary or Logical
2. type
3. mount point
4. size

I am having no other OS in the pc. just planning to have ubuntu. no dual boot needed.

View 2 Replies View Related

Ubuntu Installation :: Installer Partition 10.10 - Hangs When Select Manual Partitioning

Oct 14, 2010

I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...

1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.

2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.

View 7 Replies View Related

Ubuntu Installation :: Partitioning For Dual Boot-- Windows Is On An Extended Partition - Other Weirdness??

Jan 9, 2011

I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.

Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:

How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.

It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.

View 9 Replies View Related

Ubuntu Installation :: Dual Boot Partitioning \ What File System Should Use For Windows Swap Partition

Sep 1, 2011

I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?

View 6 Replies View Related

Fedora :: What Is The LVM Default Extent Size

Nov 5, 2010

What is the LVM default extent size? is it changeable? is it different between distributions?

View 1 Replies View Related

Fedora :: Nautilus Sorts By Size (Default Settings)

Jun 24, 2011

I have set Nautilus to sort files by type, but for some reason it always, by default, arranges files by size, meaning I have to actually click the "type" column every time I open a new folder. How do I make it sort stuff by type like it's supposed to?

View 5 Replies View Related

Ubuntu Installation :: Xrandr: Failed To Get Size Of Gamma For Output Default

Apr 30, 2011

i tried updating ubuntu from 10.10 to 11.04. It didn't work out, i got just a black screen trying to load new ubuntu. Nevermind, after multiple tries to recover it i simply installed ubuntu 11.04 over it. It works fine now, but i already got some problems Mainly, i can't find a way to pick the appropriate resolution. I have a 19" monitor with 1280x1024 resolution, video card is nvidia 8500gt. Any GUI tool (nvidia driver settings or 'monitors' tool) doesn't allow me to pick what i want. xorg.cong is nearly empty, that's all what i have there

Quote:

Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
EndSection

I did some google searches and found out about Xrandr (i'm not much a techy really). That's what i get running xrandr in the terminal

Quote:

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm

[code]....

View 7 Replies View Related

Ubuntu :: Possible? /temp/www/fake/ Contents (directory) Avaliable Through /temp/www/?

Dec 20, 2010

I have a web server whos DocumentRoot is:/tmp/wwwNow, /temp/www/fake/ is a directory that contains a series of other files/folders.What I want to do is access the files in /temp/www/fake as if they were in the root directory (/temp/www/)For example:

could either be located in "/temp/www/test.php"
-or-
located in "/temp/www/fake/test.php"

so "http://127.0.0.1/test.php" would essentially call both directories. Is this possible? Whould I do this through apache or through the actual file system somehow? (Like some sort of symbolic link?) I would love to hear your input.

View 8 Replies View Related

Hardware :: Partition Size Detected By Testdisk Bigger Than Disk Size

Mar 17, 2011

a client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.

I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?

View 2 Replies View Related

Ubuntu Installation :: 11.04 - Appropriate Values For Various Partition Size

Jun 26, 2011

I had installed ubuntu 10.10 long back but never really used it much due to academical commitments. I had installed ubuntu on a separate partition of 20 gb. I don't remember exactly what all values I had selected for various partition and I was very much confused while installation! I somehow managed to install it and this is what I got while booting my laptop! Apart from that my home and desktop size were very less.

I remembered myself giving 6 gb to swap (as I considered swap to be important). Here is what I get when I mount type in terminal!! I have downloaded the new ubuntu 11.04 and I want to start over again by totally formatting my 20 gb hard disk that I created!! Also I want to keep at least 30 gb for my new drive! What sizes exactly should I used for this installation for various file systems!

View 6 Replies View Related

Fedora :: Increase Default Large Text Size In Universal Access Settings?

May 28, 2011

I installed Fedora 15/Gnome 3 because I liked the Universal Access Settings widget for controlling the appearance of my living room computer attached to my TV. It should (when it becomes more stable) make it easy to zoom in on the screen when I'm on the couch. There is also a Large Text setting that allows me to toggle between normal text size and perhaps 125% text size.

I'd like to set that value to about 200%, but don't see how to do it. dconf-editor didn't seem to have a way. gnome-tweak-tool has a way to make all fonts bigger or smaller but I want to easily switch between normal text size when I'm sitting close and large text from the UAS. Screwing around with gnome-tweak-tool would require me to be up-close. It looks like UAS is controlled by /usr/share/gnome-control-center/ui/uap.ui, but it is a wickedly complex xml file & I don't know what to edit. Is there a per user way to change the behavior?

View 1 Replies View Related

Fedora :: Partition Only A Fraction Of Size?

Oct 11, 2010

I created a fat32 partition using command line (parted) and though I specified it to be 100 GB, it only has a 10 gig storage capacity. Disk full prompts when I try to exceed 10 gigs.

fdisk -l
...
/dev/sda2 1 12158 97654784 c W95 FAT32 (LBA)
...

View 3 Replies View Related

Fedora :: Can Someone Help Reducing Size Of Lvm Partition?

Jun 15, 2011

I have installed Fedora 15 on my laptop a couple of days ago, but now i want to install windows next to it.To do this i have to resize the lvm partition.But at the final step (vgreduce) i get this message:Physical volume "/dev/sda2" still in use.What now? Can someone help me reducing the size of my lvm partition?

View 3 Replies View Related

Fedora :: Expand The Size Of A Partition?

Aug 29, 2011

When partitioning disk devices for F14 on my new x86-64 box, I allocated 100G for / mounted on /dev/sda1. It's now 100% full. I have 365G free space available on the disk. Can I somehow extend /dev/sda1 to use some of this free space?

View 7 Replies View Related

Ubuntu Installation :: Dual Boot Partition Size

Feb 18, 2010

I must say that until now I have worked with Win2000/Xp. Long time ago I worked with Xenix and in the last 2 month sometimes with Ubuntu.Now I have brought a new PC with 320Gb HD and 4 Gb RAM, and I wish to built a dual boot system, with Win7 and Ubuntu.

View 3 Replies View Related

Ubuntu Installation :: Increase The Size Of An Extended Partition?

Apr 8, 2011

I have Ubuntu 10.10 installed on my 80gb hdd, disk has following partitions :

1. /dev/sda1 = /boot (500mb)
2. /dev/sda2 = / (20000mb)
3. /dev/sda3 = linux-swap (2000mb)
4. /dev/sda4 = extended (7000mb)
5. /dev/sda5 = /home (7000mb)
6. unallocated = (40000mb)

how can i use this unallocated space to create an NTFS partition.

View 9 Replies View Related

CentOS 5 :: Default Partitioning Not Include Separate /home?

Jun 26, 2011

Centos noob with fresh install of Centos 5 DVD on AMD w ATI Radeon 9250 /1 gb RAM/320gb HDD. Don't see an "installation" forum so posting here. Read here -> and following page which seems to indicate the default option on a new unformatted 320gb HD is suitable for most users, so selected it just to see. Install went fine. Using KDE as default desktop.cat /etc/fstab shows:

[root@centosdesktop user]# cat /etc/fstab
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2

[code]....

View 6 Replies View Related

Fedora :: Inconsistent Partition Size Between Parted And Df

Apr 17, 2010

I have a 10GB IDE disk that Parted says has a single 10GB partition (/dev/sdb1) which is mounted at /home. However, df and the Gnome file managers see it only as a 3GB partition. It was a 3GB partition when I was using Fedora 9 but the partition was resized to 10GB during the installation of Fedora 11.Can anyone suggest how to make df and Gnome see it as a 10GB partition?

View 3 Replies View Related

Fedora :: Increasing Size Of System Partition?

Jul 29, 2011

I am running Fedora 15 along with Windows 7 on my Dell laptop. Yesterday, when I was trying to install TeX Live, it stopped in between saying that there is no space left in File System. Even though I have space in my hard drive volumes, space seems to be running out of my system partition which is only 9GB in size (I guess!).I am posting a few results that might help you guys. I have an unformatted 15GB partition. How can I add it to my system partition? And is my var folder too big (1.5GB)? If yes, how do I backup its contents and then delete them? Additionally, the File System shows a folder 'media' (89GB) which links the C: drive that contains Windows 7 and my personal files. Should it remain that way or should I separate it? If the latter, how? I just couldn't find any.

Code:
#df -h
Filesystem Size Used Avail Use% Mounted on

[code]....

View 3 Replies View Related

Red Hat / Fedora :: Nfs Acting Weird For Different Size Partition

Jul 14, 2010

I am setting up a server and trying to access its partition over the nfs on a client machine. Our server has 4 1.5TB disks and the idea was to make a RAID 5 out of it.Now here is the problem:When I used only 1 disk that is nfs partition was of 1.5TB, I got fine speed(30MBps), but with multiple disks whether I am making 3TB (Raid 10) or 4.5TB (Raid 5), I get a really poor speed of 5-6MBps. I/O just waits.But for all above cases, disk I/O locally works fine.Does anyone knows any NFS limitation that is causing this problem?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved