My last HD recently got fried, so I'm installing on a new one... (or maybe I used fsck on it because it had so many bad sectors, and now it wouldn't boot anymore).I want to make 3/4 of the drive for general storage and the rest for the OS (10.10). It would look something like this:
Code:
/dev/sda...
...
[code]....
I got a new hard disk for my laptop and I want to move my Gentoo installation from old HDD to new.
Most simple guides recommend use of dd to copy the whole partition byte by byte.
I'm moving to the new drive because I don't have enough space on the old drive, so I don't want to simply clone the partition. Instead I need the destination partition to be bigger. Would dd work well in that case?
Assuming that I use same partition types on the new drive, would I be able to use simple cp with appropriate settings?
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedDo Ubuntu have a build in partitioning application. What is the name this application and where is it located?
Also is it possible to create or resize other (out-side) partitions from my Ubuntu partition? I have a 1000GB drive and Ubunta now has the first 100GB. I want to work with the other 900GB of disk space useing the partiton tool from WITH-IN Ubuntu while running, if possible.
What is the name of this tool and where is it. Are there more than one partitioning tools inside the latest version of Ubuntu?
Allow me to preface this post with fact I am 80 and the PC challenges seem to be greater and comprehension a major focus. I just finished a 12 hour recovery on due to this new Toshiba Satellite not recognizing the partition I created with gparted.
The out of the box configuration is unallocated 100 Mib, sda1 NTFS System Boot, sda 2 NTFS WOG with 286'59 GiB, sda3 NTFS Recovery. IIts scary for me to attempt it again but I will try given some clear directions. An option would be my 149 GB external formatted with EXT 3 file system
/home is running out of space, the partition on my computer is LVM, any software like Partition Magic etc to handle it? If doing from command line, any know of any tutorial?
View 6 Replies View RelatedI am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
View 1 Replies View RelatedI am a total noob for Linux / Ubuntu. I have been using windows all my life and I decided to get rid of Bill finally. I want to install Ubuntu by Manually partitioning my HD. I have a 500GB HDD. optimal partition scheme. I repeat i am a total Noob. please let me know details for each partition like
1. Primary or Logical
2. type
3. mount point
4. size
I am having no other OS in the pc. just planning to have ubuntu. no dual boot needed.
When I recently installed Redhat onto my system, I had 2 hard drives in it, and apparently the default usage for the two hard drive is to put them all into 1 volume, so now I have files scattered across both hard drives (with boot on /dev/sdb). LVM won't let me remove the /dev/sdb partition due to not enough room in volume or whatever. What is the easiest way to shift everything, including the boot partition, onto one hard drive so I can remove the other one without reinstalling everything?
View 2 Replies View RelatedMy partition /dev/sda3 on an SSD drive doesn't contain any filesystem, but it contains garbage. How do I do a TRIM/DISCARD operation on the whole partition?
View 2 Replies View RelatedI've formated partition to empty - only erased information that partition is NTFS.
Partition data haven't been changed. So i think only little change to partition table is required.
How can i recover it?
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
One of the things I wanna do is create a partition which spans across multiple HDD's. is this possible? would I need to cluster the HDD's first then add the cluster to the partition?
View 3 Replies View RelatedI have a 32g usb stick and I am trying to install Ubuntu on it. But I want to keep 16g as storage space so that I can have it as a normal USB storage for daily use. It's my understanding that I need to create 2 partition ( Since I want to use ext4 for the system which windows doesn't recognize?). But when I created two logical partition and installed ubuntu onto the second partition <sdc6>, I can't seem to boot into there,the screen stays on the white cursor blinking mode, and the usb isn't being read. Is there any way that I could do this? I just want half used as storage and half as Ubuntu system.
View 1 Replies View RelatedI formatted a new 2tb drive with XFS filesystem it appears as /dev/sdc on my system and I can mount it ok (I've copied stuff to it and can read and write from it fine)
However when I do fdisk -l it says invalid partition table for this drive only.
I'm assuming I should have created a partition like /dev/sdc1 and then formatted it?
Is there any risk/disadvantage in leaving it as it is - it will hold media files mostly.
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.
I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.
How do I install F12 and tell anaconda exactly which partitions I want to use and format?
My current working partition layout is shown in the attached screenshot.
I want to use the following custom partition layout during the initial F12 installation:
Code:
/dev/sda2 / Fedora-12-root
/dev/sda3 SWAP
/dev/sda11 /var/log/ var-log
/dev/sda12 /tmp tmp
This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.
The other partitions with data on will be mounted when the intiall installation has been completed
I use Fedora 12 AMD64 and I partition my HDD with Default partitioning what happen when temp partition is full by files ?Can this happen ? for example my temp partition full by files and my system can not use temp partition .!can I say my Fedora clear temp after each reboot .?
View 5 Replies View RelatedMy root partition is formatted as ext3 and I would like to perform a bad blocks scan on it. Normally e2fsck -c -c does this, but you can not run it on a mounted partition. I know it is possible to force a fsck to run at boot by creating the file /forcefsck but is it possible to specify that it should also check for bad blocks? If not, what is the recommended way to check for bad blocks on the root partition? I would like to avoid having to create a rescue disk and boot off of it.
View 2 Replies View RelatedI am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies View RelatedI used to have three partitions: Win7, Fedora 12 and a NTFS-Storage-Partition.Now I had to reinstall Win7, it doesn't see any files on the storage partition;Windows shows the whole rest of the disk including the linux partition as one drive with 7gb of 80gb free, I can also open it but then there is nothing in it.Linux is still working and everything on the storage partition is still there and accessible in linux.any suggestions? do i have to tell windows the partitions or does it have to do a scan or something?
View 2 Replies View RelatedI have a fairly large home partition,and several directories with content in, that currently reside in my home account.I now have two slackware installs and would like the content to be available to both installs.Is it OK/advisable to make a directory in /home that has the content in, that both user accounts are mapped to for the content (music and video mainly)? I was thinking of setting the folder as readable/writable by all. This bit makes me wonder if I might encounter problems.There is no spare partition or alternative drive that I could use for this purpose and there is too much data for me to duplicate it in both user accounts.
View 8 Replies View RelatedI want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
At present, In web server 97% space has been occupied in /usr/share/squirrelmail partition. Therefore, we need to increase the partition of our existing storage device (NAS Storage box) either by creating new partion or merged the same along with the existing partition. Local Partition Map on Mail Server.File System Name Mount Point Size (1K Blocks) Remarks
/dev/cciss/c0d0p2 / 15119928
/dev/cciss/c0d0p1 /boot 98747
/dev/cciss/c0d0p7 /data 40580552
[code]...
My linux system is running from the ram (ramfs/tmpfs). Crated a partition type 'tmpfs'. Processes are reading/ writing from/to this partition files. I am looking for utilities to sync this partition to the remote storage regularly (say, once in 10 sec). Normal copy command will produce partial files, if the copy is getting executed during a write operation.
View 2 Replies View RelatedI'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies View RelatedI have a 300 Gb Hard drive, I used to have windows xp on it but decided to install ubuntu, so what I did (after some suggestions) was to create 3 partitions, one of 30 Gb for windows (I use Adobe software), one of 10 Gb for Ubuntu 9.10 and the rest as a common partition used for storage. Started ok, but I really got hooked with ubuntu and now my partition is full!. My question is ( and here is where I show my deep ignorance and shame): can I "expand" the ubuntu partition gaining space from the storage one? If not, how many Gb would you recommend for an Ubuntu partition? I'm using a lot of music/video/graphics production software.
View 9 Replies View RelatedI am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
I'm just diving in to figuring out how to partition/utilise BTRFS.I am used to just installing with EXT4 and carving out a / and a /homeBut, from what I understand, this isn't the case with BTRFS?I know you have to create a separate /boot as grub doesn't support the file system.But, with BTRFS, we just create a / and /home and others would then just be subvolumes?What happens if I want to reinstall? I have liked being able to just wipe / and reinstall the OS, leaving my personal files in tact. Does this still happen if the /home is just a subvolume? Hopefully that makes sense
View 3 Replies View Related
