I'm currently experiencing some problems when plugging my linux box into a Widescreen monitor / HDTV (using the VGA slot). The problem is that it the driver only seems to support 640x480 and 800x600 resolutions on this Full HD TV / Monitor; however, when plugged into a standard monitor the 'xrandr -q' command shows a vast array of resolutions from 640x480 upto 1280x1024.
This is a pretty skinny install of Debian Lenny using just LXDE desktop and hardly anything else.
Can Linux support widescreen / HD resolutions and if so, how do I configure this install to work with my spanking HDTV using the VGA port?
I am getting this error on the screen when the system boots up...
"The current input timing is not supported by the monitor display. change your input timing to 1920x1080@60Hz or any other monitor listed timing as per the monitor specifications"
This monitor is a Dell U2311H, it's default resolution is 1920*1080.
My motherboard is ASUS M4A785T-M with onboard display card ATI HD4200.
The first time I installed the whole desktop system but it can't enter the gdm and the monitor is black and above error message shown. At this moment, I even don't know how to go back to console. I press CTRL+ALT+DEL, nothing happened. So I have to reinstall the system.
So the second time I only install the base system. Then install X and gnome. Then type "startx". It happen again. But fortunately this time, when I press "ESC", I can go back to console.
I also tried ATI's driver, but it was also an error during installing their driver "ati-driver-installer-10-10-x86.x86_64.run".
I also tried modified the "xorg.conf". But still not working.
I have some experience using linux systems, but my recent Fedora 10 (x86_64) install is my first attempt at installing and maintaining my own. I installed it to a clean second hard drive in my computer (Vista and XP partitions were previously installed on the first drive).The install was a bit of a fight, anaconda seemed to dislike my graphics card (ATI HD2900) and I finally got this issue resolved by running the install with 'linux xdriver=vesa'. Once the install completed I had to run a repair install to get a functioning grub, and even that I had to manually fix during the boot process because grub mixed up the two hard drives.
In Fedora I cannot choose any widescreen resolutions. I think this is either related to my hacky install process or ATI driver incompatibilities. I followed the URL... guide to try to update the drivers and have run a full system update. Neither has resolved my problems, and now I am fresh out of ideas.
Is there some other driver update process I should try, or should I just reformat the drive and try again with crossed fingers and a clean Fedora install?As an infuriating side note, I helped a friend install from the same DVD after my install fearing he might have the same issues, but the installer seemed to do everything automatically (his install was also on a second drive with Vista on the first, but his video card is a newer model ATI card than mine).
I picked up a Soyo inc. (GOVideo) Model GVKL 3278 AB t.v. a while back.
Well I think my current monitor is starting to go so I thought wouldn't it be nice to have a 32" wide-screen?
Unfortunately I can not figure out how to make this work work. I am currently running Ubuntu 9.10. This, I can honestly say is the only thing I have found that windows works on and not my Linux
Oh on the back I also found Power -110V - 240V AC 60Hz 180w
Qemu works normally for me, but the available resolutions do not include a widescreen option. Is there a work around or a command line parameter I can add to enable widescreen resolutions?
I have a nice widescreen HPL2045w monitor. My system has an NVIDIA GeForce 6150 card and I'm using the NVIDIA driver for X (Linux AMD64) and it's GREAT ... except I have A HUGE PROBLEM when I try to use xrandr to rotate the screen over to the left!
(And that it the whole point of this monitor, since it's so wide... I want to have a "long" screen for viewing lots of text and stuff!)
Ok what happens is when I do "randr -o left" it rotates, but there's a huge chunk of the X desktop off to the right of the screen and I can't see it. Is there a way to resize it? Also, most of the time the desktop ends well before the bottom of the monitor. I can see the background image that I have on my xdm screen peeking through, so it MUST be possible to utilize the whole screen ... I found a few modes where I can get to the bottom of the screen, but ALWAYS no matter what about half of the desktop is lost and hidden to the right.
I have been trying to create a new mode with xrandr but this has not been working.
What do you do when you have a widescreen tilt monitor and want to rotate it and use the long vertical screen for your X session? Shouldn't the X session just resize everything to fit? Or can this be done? I don't need super resolution guys, I just need to get everything to fit in the screen... would love your help!
I'm using stable Debian (lenny), with all the latest X, xrandr, the nvidia package, etc. I'm not afraid to experiment but I'm coming up empty!
My old 19" LCD Samsung monitor has given up, I find it is very expensive to replace it with a new LCD monitor of the same size and geometry as most new monitors on the market are now "widescreen".
My question is: is there anything odd I should expect if I buy one of those (Samsung S20A300B) for word processing applications (no interest in graphics)?
At first glance, the wide screen seems to be a bonus as it displays more of the layout of (my) HTML pages but I need more crisp characters than good and nice colors.
I have just installed Fedora 12 (64 bit), and I'm having troubles getting it working on my widescreen LCD TV. Before I installed the nvidia driver, it worked fine. After I installed the nvidia driver, it showed output on the screen until it gets to the logon screen (I never actually see the logon screen), where it goes black.
I'm assuming this is to do with my xorg.conf file, but I cant for the life of me work out what I need to change. I have been playing with all sorts of options, with no success.
Ive installed Lucid in my vaio. The vga is 4350 ATi.
The videos and games have two black stripes at the monitors edges this is due to Widescreen monitor.
At windows you can go at catalyst control center and in monitor configuration has the option for scaling so i can configured my vga to play the videos and the games at full screen with out any black gaps (right-left)
I just got an LG widescreen monitor, but i just cant set it to use a widescreen definition. It still has my old CRT monitor as the default and it does not recognize the new one Im using the nvidia card and its own settings driver.
I am running linuxmint . Trying to configure my start-up resolutions using the Startup Manager. But they only offer 4:3 resolutions. (My screen is a widescreen, 1600 by 900). So I could check the 1600 x 1200 option but that is not the correct resolution. And I get a reminder from my screen that the resolution is wrong.
mb gigabyte ga--m57sli-s4 cpu athlon 3800 memory corsair ddr2 xms 2gb graphics nvidia gforce 8500gt hdd western digital 400gb sata monitor hp lcd hp1740
the screen plays up sometimes. it gets a yellow line down one side. it's the office type 4:3 aspect monitor which seem to be getting rarer. if i switch to a widescreen 16:9 format, would i need a new graphics card?
i don't play games. but sometimes there'll be stuttering when i'm watching a videos video. whether this is the screen or something else i don't know.
When I do use Internet Explorer on a computer with widescreen (which is rare), it will automatically accomodate sites to the widescreen. I cannot get this behaviour from Firefox, however (version 3.5.13). Is there any way to get this behaviour going in Firefox?
I finally clicked on the upgrade to fedora core 11 notice.The upgrade seemed to go absolutely fine, but when I opened up a terminal, the aspect ratio of the text was all wrong. I tried "gnome falling blocks" - it looks awful.I have a 64 bit machine and a acer widescreen monitor. Fedora 10 was fine!
I have a bunch of old machines that a Client has asked us to convert into Citrix terminals. We installed Ubuntu 10 and Citrix Receiver on them, but about 5 of them are connected to new widescreen LCD's and they boot into console mode (older monitors are fine). If we unplug the cable during the boot process and then plug it in, the monitor works fine. It's only when it's auto-detected during boot that it will not load the GUI. I believe it's an old TNT64 chipset.
I am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
I installed Ubuntu 10.10 along side windows 7, It works flawlessly accept for one issue: no widescreen resolution (1440x900).I have some CIBOX screen and XFX HD 6850.
Just bought this monitor and it doesnt have widescreen support like my old Dell one but the crystal display in it is leaking across the screen. Maybe its just too new or something. I have little experience in configuring Xorg.conf although I'm pretty adept in other areas of Linux. Running ubuntu 11.04 gnome not unity or gnome-shell. The resolution is 1920x1080 (16:9), 60 Hz. with the default recommended nvidia driver. Maybe ran into the same situation or knows how to configure X.
My Toshiba Satellite C600/C has a widescreen format. Ubuntu 11.04 fills the screen as it boots but once it goes to the Unity Desktop it goes non-widescreen with bars down both sides of unused and unusable space.
I have tried it with several window managers, xfce, gnome, kde, etc...OK, have tried every thing the monitor its self will let me do (horizontal position, clock) The screen works fine in lower resolutions. It does not work on 1920 x 1080 which is what the monitor says it will do, and it does it just fine under Ubuntu and Fedora as well as winders. I guess basically i just need to know if there are any tricks you all may know or if you can direct me to a place where i may find linux driver for this monitor because im at a loss, BTW it does this on all slackware based distros. Acer P215H 21.5" Widescreen
I've recently installed Slackware 13.0 without a hitch (I haven't tweaked much yet), ran adduser, switched to the new account in a second virtual screen, typed in 'startx' and was pleased to see things start up.
Then I discovered the widescreen display was off center, leaving a black bar on the right edge of the screen and the menu button in the lower left corner completely off screen and not visible (even the menu when I was able to click around and pull it up shows only the right edge of the menu box). I have no idea how to properly configure a widescreen and the documentation is a little confusing.
I'm using slack 12.2 with a custom 2.6.27.31 kernel with uvesafb already working- 1280x800 isn't natively supported by my graphics though :-(. Which is why I'm doing this.
So I'm trying to use this gentoo tutorial to get 915resolution working on my laptop for a widescreen framebuffer. Problem is, he doesn't give any documentation on what the files in the initramfs are supposed to be or do:
Code:
Can I put it in /sbin instead without breaking anything? I don't even know what v86d.real is, it doesn't exist on my system. If somebody could explain that, that would be great.
2.) There's also a script called "dump_bios" in the slackbuild of 915resolution that's supposed to go into /usr/sbin along with the 915resolution binary. If I'm moving this to /sbin, should the dump_bios script go with it? Well, since it's only a dd command, might as well post it:
Code:
I think those are the only questions I have right now, though I'm probably leaving some out.
Ah, here's one hurdle: /usr is on a different partition than /, so I can't just change the initramfs script (I think- isn't the initramfs called before everything in fstab is mounted?).
Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel.
My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display
I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge black space both left and right side of the monitor. I have tried many times to solve it but unable to do it.The max screen resolution is 1024*768 and minimum is 640*480.
I have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations: Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020 of the same hard drive for core.img, core.img is at this location on /dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
I know of 3 at least so far Sidux and GRML and DRBL are there any others that are based on stabel or sid? or what? frugal as in like puppy, tinycore, dsl, etc nomadic like, usb, hd, etc?
I have a Windows domain with a proxy. I have an account that can use the proxy and the URL that points to the proxy.pac file. this might seem a stupid question but can anyone tell me how do I enter the username and password for my test Windows account so that Debian can authenticate it?
