I installed Ubuntu 10.10 along side windows 7, It works flawlessly accept for one issue: no widescreen resolution (1440x900).I have some CIBOX screen and XFX HD 6850.
View 3 RepliesHow can I install the video card of this netbook with widescreen resolution?
View 4 Replies View RelatedI have installed Ubuntu 10.10 on my computer. And now for some reasons I need to install Windows 7 side by side with it. I tried it before and ended up loosing my Ubuntu partition. I wanna keep Ubuntu as my main operating system.
View 7 Replies View Relatedso I've finally told myself i'd be better off with ubuntu instead of windows. And now I'm seeing I've made the wrong decision. I've spent 4 hours searching the web about how to get the 1440x900, tried some of the solutions and nothing worked. The resolution doesnt show up in the nvidia control panel. I tried somehow editing xorg.conf which just messed everything up so i had to put it in the default state..
View 2 Replies View RelatedI run RHEL5 on Dell GX280 with "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)" and i810 driver. But I cannot obtain 1440x900 resolution. Here's my xorg.conf:
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
I've been loitering over my resolution and nvidia xserver settings for about 2 days now, fiddling with xorg.conf and breaking ubuntu in the process trying to get my resolution at it's native settings. I've searched through many forums and none of them have solved my problem. Its maximum resolution is 1360x768, which isn't enough. It should be 1440x900. I have tried adding custom modes to the xorg.conf file and it wouldn't work. I don't know what's going on. Also here is my xorg.conf since I saved the nvidia settings to it...
[Code].....
I have installed Ubuntu 11.04 on my Dell Latitude D610 (with ATI X300 graphics card) and am trying to set the default resolution to 1440x900 for my Samsung Syncmaster 931 monitor. I have installed "fglrx" and when I run "xrandr -q" I get the following information.
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1440 x 1440
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 410mm x 257mm
1440x900 59.9 + 75.0
1280x1024 75.0 60.0
[Code]....
Other posts say I need to edit "etc/x11/xorg.conf" but this file does not appear to exist.
I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge black space both left and right side of the monitor. I have tried many times to solve it but unable to do it.The max screen resolution is 1024*768 and minimum is 640*480.
Here is the xorg.conf file:
After update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
After having problems with an onboard graphics chipset I've just installed an ATI Radeon 128Mb 9000 Pro AGP graphics card into my old computer... The problem is that I can't get it to use 1440x900 resolution that my LG L194WT (Ubuntu won't detect it) requires and the highest I can select is 1360x768 and that looks all wrong
lspci gives:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)
And /var/log/Xorg.0.log gives:
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
[code]....
My monitor's dvi jack is damaged so my nvidia geforce 210 does not recognise the supported resolutions correctly.
result: while it actually can support upto 1440x900, the highest available resolution is 1360x768.
While on windows, i used the nvidia utility to add the custom resolution and everything was nice.
On ubuntu 10.04, i haven't found a way to do that yet. yes, i searched forums, tried a couple of things with the xorg.conf file and lxrandr, etc. but to no avail.
I did manage to get the resolution listed in ubuntu's own display manager, and it shows 1440x900, but it doesn't apply when i hit 'apply'.
The nvidia settings manager does not show the resolution.
it will NEVER let me change the screen resolution to 1440x900. It never gives me the option. I then spend hours looking for fixes, making Xconf files and editing them to no avail. The same is true for Fedora 15 (Beta). what can i do to get the 1440x900 option in my "Display" list in Fedora.
View 2 Replies View RelatedI'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800.
Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work.
Testing it from the GRUB2 command line:
set gxfmode=1440x900
terminal_output gfxterm
# -> garbled nonsense
# back to trusty 640x480
terminal_output console
[Code]....
New install of 5.4 and I have a dell S1909W display that runs 1440x900. I don't run a windowed environment and only use CLI. I am only getting 25 lines per screen with huge text and I need to set the resolution so I can actually work :) I tried adding vga=866 to my /boot/grub/menu.lst file at the end of the kernel line but nothing changes after reboot.
View 2 Replies View RelatedI am running linuxmint . Trying to configure my start-up resolutions using the Startup Manager. But they only offer 4:3 resolutions. (My screen is a widescreen, 1600 by 900). So I could check the 1600 x 1200 option but that is not the correct resolution. And I get a reminder from my screen that the resolution is wrong.
View 2 Replies View RelatedWill I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?
View 2 Replies View RelatedI would like to know how I can view two windows side by side on the same desktop (ex. have two openoffice files side by side) and be able to work on both of them at the same time rather than having to click back and forth from window to window. I have seen this done on people that have MAC computers is there anyway to do this on Ubuntu?
View 8 Replies View RelatedI got a new laptop less than a month ago, wanted to put Ubuntu on it recently. I wanted to install it along side windows 7, but i am having issues with it. So i installed the right one for windows, ran it it installed ok, the problem is after i reboot my computer and i go to ubuntu it says it can't find the iso image.But in windows i checked and it is there... it asked me to run chkdsk /r i did two times.. and nothing was wrong with the volume. So i am confused .
Some PC info:
Windows 7 Home Premiem SP1 64-bit
Model: Presario CQ57 Notebook PC
Compaq/HP
After installing Debian for the first time earlier today, I tried to setup my display for a 1440x900 resolution. However, the "Monitor Preferences" setting won't allow me to set a resolution higher than 1280x1024.
View 3 Replies View RelatedI updated from 11.2 to 11.3 on my dual boot system and I cannot get to the Windows side. This has happened before and I know that I must change a file but I do not remember which file.
View 6 Replies View RelatedI currently have Ubuntu installed on my laptop.I have it set up the way I like it. However, I want Windows on here too...the thing is, I dont want to have to format if possible, I know that you need to install windows before Ubuntu. I have ubuntu all set up how I Like it and it would be a shame to have to wipe it.Is there any way at all I can install windows along side it without having to do a complete format?
View 3 Replies View RelatedI downloaded Ubuntu 10.4. Then I downloaded Windows 7 Pro. the bootloader got overwritten with windows 7. I cant get to the ubuntu side to do the whole sudo command to reinstall the bootloader because I do not have my ubuntu cd. Can someone please explain to me in detail how to install the bootloader from my windows side.
View 6 Replies View RelatedHow do i install Foroda 15 side of windows vista,on my desktop, cannot see a box to select it, did install it once ask me to enter a root password when it installed it and rebooted a flashing icon to enter the root password but kept saying wrong password
View 10 Replies View RelatedI want to install either windows xp or windows server 2003 or 2008. Now i want to make it so when i boot i get the bootloader window asking for windows or linux. How do i install my windows so when i click enter on windows it boots windows?
View 4 Replies View RelatedJust installed Ubuntu 10.04 on my home laptop after testing it (and loving it) on my work desktop just this morning. First time Ubuntu user and looking to be a long one, too.Anyways, I used the "install side-by-side" on both machines, but my laptop, with Vista, has a weird side effect. At the boot screen, I chose Windows Vista and it booted the recovery tool (I forgot the exact name). I was worried at first, but when I chose the actual Windows Recovery option below it to attempt to fix it, it booted Vista. So it seems in the process of partitioning the HDD for Ubuntu I somehow switched what each partition boots. Is there a way to correct this?
View 4 Replies View RelatedI have 6 year old computer with Geforce 2 Integrated GPU . Windows XP serivce pack 3 supports 1440x900 resoultion with no issues of my new LCD display. But hearing lot of linux improvements,I thought Ubuntu/Fedora/Suse over past few years must have become equivalent to XP. Friends of mine use Fedora in office. So got Live CD and installed . Installed fine but my monitor resolution only displayed 800x600. (highest possible). Thought that since Linux runs on mobile it can very well run on my Old Computer.
View 4 Replies View RelatedIt used to be a sysadmin/yast setting wherein you configured the display.It is now done under "personal settings"-->"display" meaning ordinary users can set their own preferences. That's really nice and all, but I'd rather it be sysadmin-only than have to go through several minutes of futzing around with it every blasted time I login. So, how can I make side-by-side permanent either for myself or for all the people who use my system (just me)? Thank you.
This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration.Since I obviously do and since I can get the desktops to spread across the monitors (after futzing for several minutes).
I am running Lucid, but i want to test Debian OS, but i don't want to run in VM, therefore i had decided to install Debian side-by-side to Ubuntu.Debian also uses Grub-2..? i am asking this because once i install it, i don't want to lose my Ubuntu, therefore i need Advice before install it,.
View 4 Replies View RelatedI am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies View RelatedI just installed openSuse11.3 on my desktop, but when I switch on my pc, windows starts aumatically. I can run openSuse only if I insert installation cd, select BOOT FORM HARD DISK and then Grub appears...I have a problem also with screen resolution, I installed nVidia drivers, but the maximum resolution is 1024X768...
View 3 Replies View Related