Hardware :: New Graphics Card For A New Widescreen Monitor?
Dec 22, 2010
i have a fairly outmoded system:
mb gigabyte ga--m57sli-s4
cpu athlon 3800
memory corsair ddr2 xms 2gb
graphics nvidia gforce 8500gt
hdd western digital 400gb sata
monitor hp lcd hp1740
the screen plays up sometimes. it gets a yellow line down one side. it's the office type 4:3 aspect monitor which seem to be getting rarer. if i switch to a widescreen 16:9 format, would i need a new graphics card?
i don't play games. but sometimes there'll be stuttering when i'm watching a videos video. whether this is the screen or something else i don't know.
View 2 Replies
ADVERTISEMENT
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Jan 4, 2011
the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time.
The exact message is:
The current settings cannot be applied. Possible issues may include:
- Display(s) cannot be enabled.
- Setting(s) cannot be applied due to insufficient video memory.
So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question:
First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. UPDATE: I got my active adapter in the mail today (it's DisplayPort to DVI) and so far things seem to be better. I can run my third screen, drag things seamlessly between them, and I am also running compiz. The adapter I'm using is a "B087B-005B" made by "Accell", UPC is "826388106239".
There's still a couple "annoyances" that need worked out though: The left most screen is always the primary monitor. Which means the "gnome bar" (is that what you call the applications-places-system menu?) is always on the left most screen. It also means that new dialogue boxes always opened centred on the left screen, which is counter intuitive. Especially if you're using a program like GIMP and the text editor or color picker pops up on the left. Does anyone know of a way to change it so that new windows always pop up on the center screen?
View 3 Replies
View Related
Apr 26, 2010
I'm using an Intel Q45 graphic card, VGA and HDMI. I have two monitors and both work with Win7, splitting nicely. However in Suse it doesn't find the second monitor, the one on the HDMI port. However Suse does find that there is a HDMI port it could use. It's just not set up to have a screen attached to it.Xinerama won't work. I tried it despite the fact that it shouldn't I have tried numerous xorg.conf setting according to a number of sites that were very helpful and very thorough. I tried to modify their advice but it simply didn't work out for me.It seems like the screen is simply not acknowledged within the system for some reason. I'm running OpenSUSE 11.2 with KDE4.4, factory and my other systems pick up the screen without a hitch. My home system did the same with a HDMI connection so if anyone can point me in the right direction or even better
View 6 Replies
View Related
Jan 5, 2011
What graphics card will support (without too much fiddling) three 24" displays? I just got rid of my mac and am now going to get a linux desktop. I am not sure what distro yet, probably fedora although I am thinking about arch. I have some experience in linux, although nearly none when it comes to hardware configurations. I have two 24" BenQ monitors (DVI and HDMI inputs) and will buy a third 24" display with the pc.
Now I have been looking at some forums about triple monitor setups, but they are almost all about troubleshooting existing hardware compatibility issues. I guess I am at an advantage since I haven't bough any hardware yet, so here is my question. What graphics card would you buy to support 3 24" displays together (meaning that I want to be able to drag windows from one display to the next). I was looking at the ATI HD 5770 and some mention of the eyefinity stuff.
View 7 Replies
View Related
Aug 22, 2010
the solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
View 9 Replies
View Related
May 20, 2010
I'm planning my next desktop build (currently only have a laptop that is falling apart), and one of the features I'm really looking forward to is multiple monitors. I'm thinking a 1920x1200 center monitor and two 1600x1200 on either side, but I'm not decided just yet. I don't know if I really need that resolution.
I have a few specific questions though. The only time I've ever messed with multiple monitors is way back when I had Windows, so I'm not sure what to expect on Ubuntu.
1: What is the best Graphics card brand/series to use? I've seen that ATI has more powerful hardware than nVidia for the same price range, but nVidia seems to support Linux better. I'm using an ATI card in my laptop now and have never had any problems with it (with either open source or proprietary drives, other than open source drivers didn't do well with 3d). I would also like these GPUs to be running F@H while I'm away, so GFLOPS is just important as gaming performance.
2: Since I want to use 3 monitors, I assume I should get 3 of the same graphics card or a card with 3 identical outputs (do those exist?).
Or can this be done some other way. For example, a more powerful card for the center monitor, and less powerful cards for the other two. Do those need to be the same brand, or could I use, for example, ATI and nVidia cards on the same desktop simultaneously?
3: Is it possible to have a virtual console on one monitor with a desktop on the other two, or do I need to set up a terminal on the desktop to use that monitor?
4: How can I run fullscreen SDL games with multiple monitors? Will it only show on one screen or stretch across them all? Is it possible to have a fullscreen game running on one monitor with the desktop visible on the others? How would the mouse focus work with that? Or does it just all depend on how I setup the monitors?
View 2 Replies
View Related
Nov 22, 2010
I know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
View 1 Replies
View Related
May 8, 2011
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
View 1 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Mar 11, 2010
I have a widescreen monitor, but it's looking as if the settings are appearing as 4:3, the screen is stretched, my display settings are 1024*768.
View 9 Replies
View Related
Apr 5, 2010
I picked up a Soyo inc. (GOVideo) Model GVKL 3278 AB t.v. a while back.
Well I think my current monitor is starting to go so I thought wouldn't it be nice to have a 32" wide-screen?
Unfortunately I can not figure out how to make this work work. I am currently running Ubuntu 9.10. This, I can honestly say is the only thing I have found that windows works on and not my Linux
Oh on the back I also found
Power -110V - 240V AC
60Hz 180w
View 4 Replies
View Related
Mar 17, 2010
I have a nice widescreen HPL2045w monitor. My system has an NVIDIA GeForce 6150 card and I'm using the NVIDIA driver for X (Linux AMD64) and it's GREAT ... except I have A HUGE PROBLEM when I try to use xrandr to rotate the screen over to the left!
(And that it the whole point of this monitor, since it's so wide... I want to have a "long" screen for viewing lots of text and stuff!)
Ok what happens is when I do "randr -o left" it rotates, but there's a huge chunk of the X desktop off to the right of the screen and I can't see it. Is there a way to resize it? Also, most of the time the desktop ends well before the bottom of the monitor. I can see the background image that I have on my xdm screen peeking through, so it MUST be possible to utilize the whole screen ... I found a few modes where I can get to the bottom of the screen, but ALWAYS no matter what about half of the desktop is lost and hidden to the right.
I have been trying to create a new mode with xrandr but this has not been working.
What do you do when you have a widescreen tilt monitor and want to rotate it and use the long vertical screen for your X session? Shouldn't the X session just resize everything to fit? Or can this be done? I don't need super resolution guys, I just need to get everything to fit in the screen... would love your help!
I'm using stable Debian (lenny), with all the latest X, xrandr, the nvidia package, etc. I'm not afraid to experiment but I'm coming up empty!
View 1 Replies
View Related
Jul 15, 2011
My old 19" LCD Samsung monitor has given up, I find it is very expensive to replace it with a new LCD monitor of the same size and geometry as most new monitors on the market are now "widescreen".
My question is: is there anything odd I should expect if I buy one of those (Samsung S20A300B) for word processing applications (no interest in graphics)?
At first glance, the wide screen seems to be a bonus as it displays more of the layout of (my) HTML pages but I need more crisp characters than good and nice colors.
View 3 Replies
View Related
Jun 18, 2011
I am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies
View Related
Sep 25, 2010
I have tried it with several window managers, xfce, gnome, kde, etc...OK, have tried every thing the monitor its self will let me do (horizontal position, clock) The screen works fine in lower resolutions. It does not work on 1920 x 1080 which is what the monitor says it will do, and it does it just fine under Ubuntu and Fedora as well as winders. I guess basically i just need to know if there are any tricks you all may know or if you can direct me to a place where i may find linux driver for this monitor because im at a loss, BTW it does this on all slackware based distros. Acer P215H 21.5" Widescreen
View 1 Replies
View Related
Dec 15, 2009
I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge black space both left and right side of the monitor. I have tried many times to solve it but unable to do it.The max screen resolution is 1024*768 and minimum is 640*480.
Here is the xorg.conf file:
View 2 Replies
View Related
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jan 3, 2010
How can I install the video card of this netbook with widescreen resolution?
View 4 Replies
View Related
Sep 5, 2011
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
View 3 Replies
View Related
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Jan 27, 2011
I just installed Ubuntu 10.10 on my Dell Latitude D430 that I use at work. I have it on my desk docked going to a Dell LCD Monitor. When I go into the monitor set up it says Unknown for the monitor and Laptop for the actual laptop display. Also, I have very low resolutions for the "Unknown" monitor.
I am trying to resolved this issue so that I have better resolutions on the external monitor and then I can try to extend the desktop between 2 screens.
I found something online about adding the intel PPA and I did that, but now what. There is no xorg.conf that I can find for 10.10.
View 7 Replies
View Related
May 18, 2011
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies
View Related
Jan 11, 2010
9.10 Problem with Graphics/3D and other I have a Thinkpad T42, 1.7GHz, 1Gb Ram and a Radeon 7500 Graphics card. Everything that I am having trouble with works just fine in Ubuntu 9.04(except for the sound). There are two problems that I think are linked or really the same. First off, When I turn off Compiz(Compiz works by default) then gnome-system-monitor does not work properly. At least the graphics side of it; the window appears black with random lines running threw it. The same thing will happen to Gnome-do if Compiz is off.
The second problem is getting 3d support to work. I installed and tried to run blender and I got this from the terminal:
[Code]...
Then it ether does not open or the computer locks up completely and I have to force a shutdown. Which ever one it does I do not get my desired results. When trying to do chess in 3D it tells that I have 'No Python OpenGL support'. So I install the python-opengl package from the repositories; the program now just errors on start and I had to uninstall python-opengl to get Chess to work again. I have tried all this with Compiz on and off with the same results. Anyways thats about it, unless somebody knows how to setup the sound so a program won't lock it from other, then thats all I am having trouble with.
[Code]....
View 3 Replies
View Related
May 12, 2010
i'm trying since ubuntu karmic to set up a xorg.conf for a special purpose. I've a htpc connected to my tv. Intel GMA 4500, DVI->HDMI-cable connected, Lucid Lynx installed. When the machine boots with the TV powered on, everything is perfect. xrandr reports all valid modes on output "DP2". Without the TV powerd on, Lucid starts in the low graphics mode, with the funny zenity-message. So far, i managed to disable all useless outputs (VGA1, HDMI1, DP1, HDMI2), leaving DP2 enabled. I managed this by assigning outputs to monitors and adding Option "Ignore" "True" to the corresponding monitor-sections. My only remaining problem is, that the intel-driver reports no connected monitor on output DP2. The TV is connected, but shut off. Has anyone got a hint to tell the driver to ignore the presence of a monitor?
[Code]...
View 7 Replies
View Related
Nov 26, 2010
I've installed CentOS 5.5 64 bit on a Dell Latitude e6410. This model only contains Intel HD Graphics, not the extra Nvidia card you could also buy in addition. The getinfo output can be found here:[URL] Initially X11 did not work at all (blank screen), but using hints from other posts in this forum I was able to fix this by editing the file xorg.conf using the vesa driver, although I still do not get the native screen resolution of 1200x800 (I alwas get 1152x768).
Now I want to add an external monitor (Samsung Monitor connected via DVI, screen resolution 1680x1050). Unfortunately as soon as I try to configure the dual head mode using the system-config-display tool after restart of the X server there will be the the blank screen again. I tried various drivers with no luck.Has anyone succeeded setting up dual head on an Intel HD Graphics machine? I understand that this hardware is quite new and and would be easier to set up with more recent distros, but I would like to stick to CentOS, but cannot wait for CentOS 6.
View 1 Replies
View Related
May 30, 2011
having fitted my computer with a quieter case fan and power supply, the loudest component is now my nvidia geforce 7900gs graphics card. Whilst not intolerable, I would like a solution to make it near, or absolute silent, and so in light of this a few questions:
1) How can I be sure the noise i'm hearing is the fan, and not a whine from the card?
2) How do I find out at what temperature low - if at all! - the fan switches off at? i.e. driver functionality
3) Do I dare use nvclock (nvclock -f -fanspeed x) to go below my current 20% fanspeed at a temp of 56C?
4) Would a cooling unit make any difference, especially if the driver won't shut down the fan anyway?
5) Is there a safe script I could try out?
View 14 Replies
View Related
Jan 13, 2010
I installed the "recommended" graphic driver that pops up at top right and once I restarted the laptop, my graphics card no longer works with Ubuntu.
using Nvidia GeForce GT240M
View 2 Replies
View Related
