Debian Configuration :: NVidia Driver Fails With Built Kernel?
Jul 30, 2011
I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
code....
View 6 Replies
ADVERTISEMENT
Apr 26, 2011
Squeeze-beta was my first foray into Debian, and I love it. I changed my setup to a rolling setup with testing (Wheezy), and have done that for several months. Lately, I got a new kernel, but it reboots to a terminal rather than GUI (I'm a simple laptop user). I think it's because of the NVIDIA drivers, and here is what I've tried (meanwhile, I'm using the previous kernel):
# apt-get install module-assistant nvidia-kernel-common
# m-a auto-install nvidia-kernel${VERSION}-source
A blue screen appears that says:
module-assistant error message Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use.
You can try:
module-assistant prepare
or
apt-get install linux-headers-2.6.38-2-amd64
I have done both, rebooted, and I still get the blue screen. I also see this message:
nvidia-kernel-source was not built successfully, see:
/var/cache/modass/nvidia-kernel-source*buildlog*
...and I have copy/pasted the file below (which omits lines 101-200 because this message is too long then):
/usr/bin/make -f debian/rules clean
make[1]: Entering directory `/usr/src/modules/nvidia-kernel'
test -f debian/control || cp debian/control.template debian/control
[code]....
View 1 Replies
View Related
Jun 26, 2010
Is there a way to programmatically determine whether a particular driver support is built-in rather than a loadable module? I'd be grateful if somebody would share how. I have written a shell script using the RTC (real time clock). I can check whether the rtc-cmos kernel module exists and load the module accordingly as needed, but I don't know how to determine when the driver is built-in. Of course, if the driver is built-in then the module does not exist.
I seem to recall there is a method to query the kernel config file (/proc/config.gz), through which I probably could grep for the CONFIG_RTC_DRV_CMOS parameter. I also can check whether /proc/driver/rtc exists. If that file exists then either the driver is built-in or the module was loaded.I realize the rtc-cmos driver is built-in with the standard Debian kernel build, but I still would like a way to query where the driver is supported.Is there a straightforward or direct method to query the kernel whether a particular driver is built-in?
View 3 Replies
View Related
May 10, 2011
I'm encountering a problem running X and Gnome from a Xen-enabled Kernel with NVIDIA Binary driver compiled with IGNORE_XEN_PRESENCE=y on debian squeeze
Hardware:
NVIDIA NVS 5100M
Kernel:
Debian Squeeze : 2.6.32-5-xen-amd64
NVIDIA Kernel from the official package
Boot and module loading are successful, but when X starts, I only get a black screen. I attached here my Xorg.0.log, however it doesn't seems to have any problem.
View 5 Replies
View Related
May 19, 2010
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
View 14 Replies
View Related
Apr 17, 2010
I just updated to 2.6.33 kernel and I am using an Intel Mac with ubuntu 9.10 running native. I upgraded because the new kernel has sound working for the imac (at least through headphones). Once the kernel was updated to 2.6.33 the proprietary NVIDIA graphics driver which I had activated through systems -> administration -> hardware drivers is now inactive and will not work. systems -> administration -> hardware drivers says to look in /var/log/jockey.log, here is the last part of that file [URL]. PLEASE HELP OUT. I hate using the Mac os on the other partition.
View 2 Replies
View Related
Oct 1, 2010
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
View 1 Replies
View Related
Jan 24, 2010
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies
View Related
Sep 4, 2015
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies
View Related
Jun 7, 2010
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
View 14 Replies
View Related
Aug 27, 2011
I'm having problems with resume after suspend to RAM. The machine starts to wake up, but the screens (multi mon VGA and DVI setup) are black and the keyboard doesn't light up. After ~20 seconds there's some brief disk activity and then the computer reboots. 100% repeatable with affected kernel versions. My test method is simple, I boot the machine on the kernel's recovery option, log on as root and run "PM_DEBUG=1 pm-suspend". I haven't found anything in the logs after a failed resume.
Here's the situation:
I have a SSD disk. To get TRIM support I have to use kernel 2.6.33 or later, which means that the standard kernel in Squeeze is too old.I have Nvidia graphics, and there was a change in 2.6.34 that breaks older versions of xserver-xorg-video-nouveau (version 0.0.15, used in Squeeze), I can't use Debian Squeeze with a kernel newer than 2.6.33.x.My machine (XFX GeForce 9300 motherboard) won't resume from suspend to RAM if I use a kernel newer than 2.6.36. There are no BIOS updates available.
My options:
Install newer kernel from Squeeze backports (2.6.38.2 last time I tried). <--- Not doable b/c of resume problems. Upgrade to Wheezy, which uses kernel 3.0.x. <--- Not doable b/c of resume problems.Compile a vanilla kernel. So basically I'm forced to compile my own vanilla kernel, 2.6.33.x on Squeeze or 2.6.35.x on Wheezy. I won't be stuck with an unsupported kernel version in the near future, but so far I've failed miserably.
I know that the latest kernel version where everything works is 2.6.36.x (no longer maintained), 2.6.37.0 and later cause resume problems (I've tried 2.6.37, 38, 39 and 3.0.0, .0.1). I've tried doing a git bisect on the kernel, but didn't succeed, ended up on 2.6.36-rc5 which is weird considering that 2.6.36.4 works. There may be several suspend/resume bugs in different kernel versions that messed up the bisecting results.
View 2 Replies
View Related
Apr 2, 2010
I follow a french tutorial to install the nvidia pilots. So, i did :
$ su
# apt-get install module-assistant
# m-a prepare
# m-a clean nvidia-kernel
# m-a a-i -i nvidia-kernel-source
[Code]....
View 6 Replies
View Related
Jul 14, 2011
I get plymouth and install it success, but it only support nouveau(nvidia) mode.
When I update my driver with [URL] , plymouth gone.
Is there any other way to do boot-image with the driver from [URL] ?
I find super-image-manager(buc), but I can not install it.
Addition: What is buc ?
View 3 Replies
View Related
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
View Related
Aug 17, 2011
After I've installed nvidia-vdpau-driver 280.13-1 from debian testing repositories, all the colors on the screen became too bright, except dark colors.
I've tried to change the values from Brightness, Contrast and Gamma, in NVIDIA X Server Settings -> X Server Color Correction, but it doesn't bring everything back to normal.
Either the nvidia driver has problems, or I don't know how to calibrate. But before I installed nvidia-vdpau-driver, I had the nouveau display driver (experimental), and all colors were displayed normally, the same as in Windows 7 and XP.
View 1 Replies
View Related
May 4, 2010
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
Here is /var/log/nvidia-installer.log:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7
[code].....
View 12 Replies
View Related
Apr 20, 2011
How do I determine which nVidia kernel to use with my system? I'm running a GeForce9800GT
View 11 Replies
View Related
Jan 23, 2010
I read over the X11 acceleration in this forum but I'm not having issues with acceleration - running slackware 13 with built in ATI AGP stuff in kernel. Glxgears is putting out what I would expect for a 9600 pro (2500 FPS in the little window). I haven't needed you guys for a very long time but I just formatted Ubuntu (was getting on my nerves) and installed slack 12 on my hp netbook and 13 on my old desktop without a hitch - except this
I NEED BIG DESKTOP! I've searched, I've read, I've wondered! What's the normal setup in xorg.conf for bigdesktop WITHOUT the ATI driver (I ran the driver after building a custom kernel and the installer crashed with "Error: ./default_policy.sh does not support version" - I think I should of renamed my kernel path and setup differently or something)? Is BigDesktop ONLY supported with the driver? I know now that the driver wont work for my system - How do I enable bigdesktop with the open source driver I built in?
View 1 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Dec 17, 2010
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
View 14 Replies
View Related
Mar 23, 2011
I have 64bit debian 6 squeeze installed on my 64bit pc. I have an NVIDIA gpu which I have installed the drivers for and they work just fine. I also have a 32 bit chroot located at /32 which was created using debootstrap. The NVIDIA 64bit driver gives the option to install compatability driver libraries into the 32bit chroot. Whenever I run any application that uses opengl rendering within the chroot, they segfault. When I uninstalled and reinstalled the NVIDIA driver without installing the libraries to the chroot, and instead replaced them with mesa gl libraries, the programs complain about framebuffer missing. They do not segfault, and some programs that can use sdl instead will work fine. I have xhost + set to allow any programs in the chroot to use the host's xorg. I have the host's proc mounted to the chroot proc directory, and i also have dev mount --bind 'ed to the chroot.
View 11 Replies
View Related
Aug 4, 2010
I am fairly new to Linux. My machine is running Debian 5.0.5 with gcc version 4.3. When I try to install the Nvidia QuadroFX 3450 driver I got from the Nvidia web site I get an error saying:
"The compiler used to compile the kernel (gcc 4.1) does not exactly match the current compiler (gcc 4.3)....."
Does this mean my gcc version is too new for the driver? if so, how do I roll back to a older version?
View 8 Replies
View Related
May 17, 2010
Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
View 2 Replies
View Related
Jun 16, 2011
I'm running Debian wheezy on a Toshiba NB505 and I've noticed that the wireless connectivity can be painfully slow at times. I know it's not our home network because my desktop flies (running Windows).Currently, I have the driver from this guide installed. I went to Realtek's site to download the latest driver for this wireless card (RTL8188CE, the Linux/UNIX version) thinking maybe this more up-to-date driver would operate better than the one used in the guide above.Is there a possible way to install this driver, or should I just stick with the current driver I'm using from the guide above?
View 11 Replies
View Related
May 3, 2011
When I only change a driver file manually, for example /newkernel/linux-source-.6.32/drivers/gpu/drm/i915_drv.h, do I need to run "make config" or similar like "make menuconfig" or can I just skip? I mean these steps:
1.) apt-get install linux-source-2.6.32
2.) mkdir ~/newkernel/
3.) cp /usr/src/linux-source-2.6.32.tar.bz2 ~/newkernel/
4.) cd /newkernel/
5.) tar xjf linux-source-2.6.32.tar.bz2
6.) cd linux-source-2.6.32
7.) cp /boot/config-$(uname -r) ./.config yes "" | make oldconfig
8.) change the driver file /newkernel/linux-source-2.6.32/drivers/gpu/drm/i915_drv.h manually
8.) make-kpkg clean
9.) make-kpkg --rootcmd fakeroot --initrd --revision=custom.001 kernel_image kernel_headers
10.) dpkg -i *.deb
Is this way OK or do I miss something?
View 14 Replies
View Related
May 21, 2011
I' d like to apply this patch into my squeeze: [URL] Can someone pls explain howto apply driver diff patch into a custom kernel?
View 9 Replies
View Related
Mar 3, 2011
i couldn't get out after many hours of reading documents/posts/forums etc.
The issue:In Kde 4.4.5, using xorg and radeon opensource driver, i can't set OpenGL for desktop effects. Clicking "Apply" it fails. OpenGL seems corrupted someway. I have to stay on XRender. This is the glxinfo output:
glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.7.1
OpenGL shading language version string: 1.20
OpenGL extensions:
The story:i was running previously kde with nvidia propertary driver and a nvidia board. Then i removed the board for a fault and put a sapphire radeon HD5450. Initially i set up propertary radeon fglrx. At the end, i decided to use the opensource drivers, removed in the best way all fglrx files and links. So i then followed the wiki for reinstall open source radeon drivers, did it many times, also reinstalling xorg with purge, same for libgl1-mesa-xxx etc, but i still cannot use the OpenGL hardware support (should be DRI, that is correctly installed but not loaded).
Seems to be really an opengl corruption, if i disable the check on apply, and select OpenGL rendering, i get a complete blank screen.
Some information of the system:
01:12 ] angelo@angel3 [~] cat /proc/cpuinfo
processor: 0
vendor_id : GenuineIntel
cpu family : 6
code....
View 3 Replies
View Related
Jul 4, 2010
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
May 25, 2010
I got last night debian 5 stable, but it has an older version of kernel, I think 2.6.26, which doesn't have my network card drivers. I tried to install myself the kernel, but I a newbie in linux, so something failed and I give up until next time. Is this version: [URL] a safer one for a desktop computer, daily usage? How to I know it has the latest kernel?
View 3 Replies
View Related