Debian Multimedia :: Can't Load Graphical Enviroment
Apr 5, 2011I'm having problems installing Debian 6.0I can't load the graphical enviroment. I've tried the gnome and lxde but both of them freezes on screen.
View 1 RepliesI'm having problems installing Debian 6.0I can't load the graphical enviroment. I've tried the gnome and lxde but both of them freezes on screen.
View 1 RepliesHave been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...
View 1 Replies View RelatedI'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
I installed debian without a desktop enviroment. Say I next used aptitude to download and install openbox, ice, enlightenment, or some other window manager/ desktop enviroment. On the next boot up, would I get the command line or a login screen?
View 3 Replies View RelatedI've never really found an FTP client that I really like, but until recently I've been using gftp. Now I'd like to switch from ftp to sftp, and when I try this in gftp (using the host ftps://ftp.website.com) it just says this:FTPS Support unavailable since SSL support was not compiled in. Aborting connection.
View 3 Replies View RelatedRecently switched from windows XP on Debian. Very happy) After reading smth my eyes are really tired, fonts are smoothed or smth like that But! Do not like the font settings, there is no definition that is in the windows. Very tired eyes, advise how to configure?KDE stands Smoothing, that is just not done
View 11 Replies View RelatedSo I've upgraded from Lenny to Squeeze, which has been a tadge more interesting than I would like, but there it is. But I've got one problem that is eluding me still. When I load up, but before login, my second monitor displays what I can only describe as a glitched-up memory of something it was displaying before, unless it has been turned off and turned back on again (as opposed to restarted), in which case it displays a very bizarre tiled image. I can't help but feel this is something obvious I've missed.
View 1 Replies View RelatedRequirements - 1) Should have options to show only graphical packages.2) Easy to use.Software-center is outdated and packagekit doesn't work well (search for 'winff' with graphical packages filter) with any backend.
View 14 Replies View RelatedI have a web server that hosts multiple websites. Am looking for an application that can be run on my workstation and makes it possible to watch Apache logs live.
It should have a tabbed interface. When I launch the application, it has to connect to my server and should automatically open all access.log and error.log files and display all changes in real time (similar to tail -f command).
Does anything like this exist?
I'm tired of logging in many times in Konsole and executing tail -f commands to see parallel logs.
I installed CentOS with KDE and Gnome. the computer starts with a console instead of a window manager. When I try to start Gnome (using either startx or gdm), it freezes the whole computer. I can't even get to another command prompt using Control+Alt+F2, when I try to start Gnome.
After rebooting I tried starting KDE using the kdm command, but it prints out some error messages and logs me out of my session. (I've never seen a program force a log out of a session before! I thought that was strange.) I tried to record the errors by using the command "kdm > errors.log" and "kdm >> errors.log", but nothing is written to the errors.log file.
Also, under the (likely?) case that this problem is caused by the graphics card, I ran lspci and discovered that this computer contains this graphics card: VGA Compatible Controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
I'm facing a problem installing Fedora 12 x64 on my desktop.I've been trying to get the Graphical Installer (anaconda) to run, in vain. The error message I get is reproduced below:
Code:
(EE) [drm] drmOpen failed
(EE) NOUVEAU(0): [drm] error opening the drm
[code]....
I had just upgraded when after the first reboot I noticed that the black Ubuntu screen (with the little red/white dots) is actually white and buggy. It's unreadable and looks trashed.
After the first login, the desktop wasn't able to load properly, leaving me with a blinking, unresponsive icons and no menubars.
The only way to use the desktop environment is to choose Ubuntu Classic (both with and without effects) and Ubuntu Safe Mode.
I do have nvidia drivers installed (173).
I have my first problem with drivers in Linux! I installed openSuSE 11.4 x86 on my computer (Intel Dual-Core 2,5 Ghz; Nvidia 7300 GS) and after installing graphical drivers (proprietary) I can't load the system. All I have is a progress bar of user's profile loading and playing the startup sound. I already installed openSUSE 11.4 x86_64 version on this computer and there was no problem with drivers.
View 8 Replies View RelatedI've been trying to get SELinux working in OpenSUSE 11.2. So far I can get to runlevel 3 with enforcing=0. Before I start tinkering with audit2allow, The 11.2 repository gives me these policy rpms:
[URL]
But that version of policy has some issues in OpenSUSE:
1) failure to allow the graphical desktop to load (even with enforcing=0) . The following message appears in the console during boot:
** (gdm:1073): WARNING **: Couldn't connect to system bus: A SELinux policy prevents this sender from sending this message to this recipient (rejected message had sender "(unset)" interface "org.freedesktop.DBus" member "Hello" erro name "(unset)" destination "org.freedesktop.DBus") startproc: exit status of parent of /usr/sbin/gdm: 1 Since enforcing is off, I'm surprised to see a message like that. SELinux shouldn't be preventing anything, so I don't see how modifying policy will solve that. Ideas?
2) Attempting to boot to runlevel 5 with kernel parms "security=selinux selinux=1 enforcing=0", I'm dropped off in runlevel 3 instead. I'm getting a couple of pages of AVC errors after boot (see below). I've tried several other versions of the policy without luck:
- the version included in Fedora 12 (refpolicy-2.2009117
- the latest release from Tresys
- the latest from the repository at Tresys
[Code]....
After regular upgrade (I am using Unstable) I boot my system today but failed to load X using xinit (which I always use). Using startx X loads but leaves it unusable, both mouse and keyboard don't work (I never use startx really as regular user but in root). The message is:
Code: Select allxf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
In my /etc/X11/Xwrapper.config I changed "allowed_users=console" to "allowed_users=anybody" and that doesn't work.
Gnome loads without problems when Kernel Mode Setting is enabled. Original message
Daily updated Debian Testing | Custom Gnome installation
Intel GS45 chipset | Intel GMA 4500HD graphic card
The title is rather vague because I haven't been able to identify the cause of the problem. I installed Debian Testing using the daily builds of March 6th and 7th with the same results: the system fails to load the Gnome desktop after the log in. Instead, a pale blue background is shown. No panels, no window manager, nothing. I can move the cursor but there's no context menu and the key bindings don't work, turning the session useless. The problem exists in all accounts, and persists even when the dot-files are deleted after the first Gnome start.
After trial and error, I found out that if I changed to a virtual console (VC1 to VC6) and go back to VC7 (sometimes VC8), the Gnome desktop loads as expected. The pale blue background is shown over/instead of the actual background and I need to cover ("paint") it with a window to show the actual one. This pointed me to a Gnome Session or a graphics card error. Indeed, if I disable Gnome Session, the Gnome desktop loads after the log in. Of course, no interface settings are set. I checked the Gnome Session's bug list without luck and the error messages in .xsession-errors aren't conclusive, for they appear in other cases.
About the graphics card: the video settings work (screen settings, 3D accelaration, recovery after suspend to RAM/disk) but Xorg's log shows several erros and warnings when setting up the system (mostly related to the video and touchpad settings). Right now, I'm building a custom xorg.conf file to try to decreases udev's errors and see if it affects the Gnome problem. I've spent hours trying to solve this problem. It's annoying to lose interface settings after closing the session (key bindings and brightness settings, for example).
I installed 1.3.3 + wbar dfsg2-1 it works almost correctly
I have a small problem on the second line of the file dot.wbar line is as follows
When I run the command "wbar - config dot.wbar" I get the message
With the parameter:
i cant load PNG image extensions..i dont know what to do.when i pressed the button printscreen of my keyboard the system shows me an error dialog:"Unable to save screenshot to disk:The type 'png' is not suported."what is the problem??i try to rebuild libpng and libjpeg, but i cant solve the problem.
View 3 Replies View RelatedI upgraded the distro (Strecht - Testing) and the result was almost the same mentioned by mittgreen, when I boot the system it fails to load the X, ending in the "oh no something has gone wrong" screen.Now, the only possible way to use the GUI is to start it manually by startx command. Reading the Xorg.log I saw a "No screens found" error.
View 1 Replies View RelatedBeen running into a problem where the desktop won't load after I login. It'll just flash my wallpaper for a second and goes back to this blue-ish background and stays there, so the only solution I found was to just press and hold down the power switch, turn on the system again, and login again.
View 7 Replies View RelatedI have a system with 2 hard drives (Ubuntu 10.10 and Windows XP) on them. Grub allows me to select which system to boot to.
Ubuntu 10.10 has stopped working (not loading gnome graphical interface) for some reason.
I can boot to a command line (after many errors on screen). When I try the command "gnome-terminal" I get: "Failed to Parse Arguments: Cannot open display:"
I am running squeeze on a PC 1386 and installed nvidia by using the packages in unstable. I was able to install nvidia and there was no error until the time I started X. The error is unable to load module "nvidia" (module does not exist, 0).
I looked up the log for Xorg and it says Unloadable Module "nvidia".
I spent the entire 24 hours to fix it because this is my office computer and I practically done all the stuff found in the forums. I already did nvidia-xconfig to no avail. I even edited xorg.conf manually and still it was not up.
I have some suspects however which are:
1. Different versions between kernel and nvidia (but since I did it the debian way then I should not have any problems).
2. Nvidia-glx is unusable in Squeeze, so does it mean I go for the unstable distro?
3. Or I miss something crucial on how I installed it?
By the way, I installed Nvidia because I am using a SAMSUNG 21' LED monitor.
After a fresh custom install of Squeeze I could not play any video. debian-multimedia.org repository is in my sources.list. Trying to play an AVI video with totem I get the message
[code]...
I know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedI upgraded to jessie today and I am having problems with my background. When I log in, the background tries to start on the external monitor but then it fails to load. I can change the background in settings but it does not show up. The background just becomes black and I am not sure why.
View 3 Replies View RelatedI have a computer with Windows and I am running a Matlab program remotely in a Linux server. That (matlab) program will use an executable file (.exe) to analize some data; and that data will be used as input to a program that I can only run in the linux server.I need to run an executable file (.exe) from matlab in a linux enviroment. Is this possible?
View 13 Replies View RelatedI didnt quite understand the guide on S2RAM. For example, when doing this:
Code:
linux-a7dy:/home/gabriel # s2ram -f -a3
switching from vt7 to vt1... succeeded
fbcon fb0 state 1
s2ram_do: No such device
fbcon fb0 state 0
switching back to vt7... succeeded
Does that mean it worked? I ran it both from the minimun enviroment and from KDE and got the same things on text, but no actual suspend of the system!
This is not Ubuntu-specific thing-y per se but i will go on. I cant connect to msn messenger service from my university's environment cause the administration has blocked all the ports that messenger needs.
I have a server in my home which runs Ubuntu and i would like to create a tunnel from my school to this server, and connect to messenger service through that tunnel, i have been trying to get this working with ssh, and i successfully made it in a test environment in my home, but the same thing wont work from school.
[Code]...
I 've been trying to install Globalmenu menubar after having installed all the other Global menu packages that appear on the Ubuntu Software Center. I 'm using Ubuntu 10.10 with Gnome environment and mostly as a graphic environment (i don't have knowledge on source codes)..The error message that i get when i try to install the menubar is the following: Package dependencies cannot be resolvedThis error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.
View 9 Replies View RelatedI have Samsung NP145 with intel atom n450
And this is what terminal says: 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Do graphical effects work on my netbook?