I've never really found an FTP client that I really like, but until recently I've been using gftp. Now I'd like to switch from ftp to sftp, and when I try this in gftp (using the host ftps://ftp.website.com) it just says this:FTPS Support unavailable since SSL support was not compiled in. Aborting connection.
View 3 RepliesI have setup SFTP and it is running without any problems. The problem I have is finding a client that supports key based logins through Linux. I do not want user based logins available and so far the solution works through my Windows machines using WinSCP. The only client I have found for Linux seems to be FileZilla but I have to convert my private key to the FileZilla format which removes the passphrase leaving it nice and insecure.
View 4 Replies View RelatedCan i block on debian that user can not download any files from host via winscp or other SFTP client ?
View 4 Replies View RelatedI'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
I have changed my web server from FTP to SFTP for security reasons. I am used to Nautilus randomly crashing, but usually I got to connect fine via FTP. Now I could connect exactly once with SFTP, but ever since I only get the useful message:Oops! Something went wrong. Unhandled error message: SSH program unexpectedly exited
View 1 Replies View RelatedI'm having problems installing Debian 6.0I can't load the graphical enviroment. I've tried the gnome and lxde but both of them freezes on screen.
View 1 Replies View RelatedRecently switched from windows XP on Debian. Very happy) After reading smth my eyes are really tired, fonts are smoothed or smth like that But! Do not like the font settings, there is no definition that is in the windows. Very tired eyes, advise how to configure?KDE stands Smoothing, that is just not done
View 11 Replies View RelatedSo I've upgraded from Lenny to Squeeze, which has been a tadge more interesting than I would like, but there it is. But I've got one problem that is eluding me still. When I load up, but before login, my second monitor displays what I can only describe as a glitched-up memory of something it was displaying before, unless it has been turned off and turned back on again (as opposed to restarted), in which case it displays a very bizarre tiled image. I can't help but feel this is something obvious I've missed.
View 1 Replies View RelatedRequirements - 1) Should have options to show only graphical packages.2) Easy to use.Software-center is outdated and packagekit doesn't work well (search for 'winff' with graphical packages filter) with any backend.
View 14 Replies View RelatedI have a sles 10 server that I need an iseries 5 client to make an sftp connection to. I'm getting the following error in the /var/logs/message log:
[Code]...
If i were to build an sftp client which launched with logon details, and could then controlled by sending commands to that daemon; would that be ideal way to create an sftp client with disposable credentials?
View 1 Replies View RelatedI have a web server that hosts multiple websites. Am looking for an application that can be run on my workstation and makes it possible to watch Apache logs live.
It should have a tabbed interface. When I launch the application, it has to connect to my server and should automatically open all access.log and error.log files and display all changes in real time (similar to tail -f command).
Does anything like this exist?
I'm tired of logging in many times in Konsole and executing tail -f commands to see parallel logs.
I have remote server and when I want to connect to it from internet I need to choose port 2222. I tryed to do it using filezilla, gftp, it can be done. Because they want from me to use default ssh port 22
View 1 Replies View RelatedI've got Fedora core 12 - I'm ex windows user.I have these 3 websites to maintain.These are in finnish language. So called pikalaina sites: Now I would like to add some database driven functionality to these sites.I don't wanna use command line - too dangerous for type errors.MySQL own programs is not very good.In windows I used to use MysqlYog, it was nice.Is there a good graphical MySQL client available for Fedora core 12 ?
View 2 Replies View RelatedKernel 2.6.21.5, Slackware 12.0Mozilla Thunderbird 2.0.0.4I have just typed, using a GUI mail client (or the graphical front end of a mail client) the text of a letter and am about to send it. Before I do so, I'd like to see how the letter will look to the recipient. But I can't find anything similar to a 'Preview' button. The client I use is Thunderbird. What do users of mail clients (graphical) do in a similar situation? I mean "to preview", when writing. Form among all mail clients, many must share the same features.
View 7 Replies View RelatedDoes anyone know of a VNC client that can access a mac (OS X 10.6)? When I try Vinagre, I get the message:
Authentication method to host <ip address> is unsupported. (30)
Tried to install aMSN using Sid package... can't do it because no TK8.5. Installed TK8.5 and aMSN, now I get another strange message ...
Error in startup script:
OK ...
Let's check out 'Empathy IM Client' , no longer any support for MSN because ...?
Tried to setup Mercury which needs Java. Go to run Mercury, no java!
Had to set up Pidgin so that I could go on msn!
I have installed squeeze with KDE. I have xterm bugs, this last kill alone with command apt-get, the xterm is killed! There are another xterm client that I install under KDE?
>> apt-get install another xterm ........
I use a P2P application (KMLDonkey), whose client (mlnet) can be either started automatically, at startup, or manually, after login. At installation, when prompted, I chose the former so as to minimise the number of clicks. However, with time I found it inconvenient because, of course, it would start downloading even though I haven't started its GUI yet or don't plan to use it at all.
What I would like is to click on 1 entry in the menu and have the client and, in sequence, the GUI start when I decide to use the application. Perhaps this would require a short script in /usr/local/bin? I've tried to write one, but failed miserably, as I'm not good at it. I use KDE, but the application or the desktop manager themselves are not important here, for the solution would apply to any application with a separate client/GUI.
Is there any way get a VoIP-client with ZRTP-support for SIP, without having to add extra third party repos, ect.? Is there anything in the the Debian repo's that actually support this protocol at all?
None of the two clients I've tried so far (Linphone and SFLphone) work out of the box on Debian. Linphone doesn't work with ZRTP on Debian (bug #743474), it work an all other systems, but not for Debian. SFLphone is no longer supported, as it has gone to the project Ring, which cannot be installed without adding additional repos.
I am running debian testing, amd64 architecture on my box. I have 3 gmail accounts that I use regularly. I have used mainly thunderbird/icedove to access my mailboxes via imap.However, now two of them have really several tens of thousands of emails I often experience difficulties in dealing with them (the connection often freezes, browsing my folders is a pain).I tried also sylpheed and claws, but the situation has not really improved.I do not think there is anything fundamentally wrong in the way I configured my accounts on the various clients (actually, some of them even boast automatic setup of gmail accounts).
View 5 Replies View RelatedSpice server/client configuration. I used remote viewer on debian jessie to connect to a guest virtual machine on kvm and everything works fine. It used a spice server / client and qxl. After I upgraded to debian stretch, I suddenly face issues with black bars in the remote client window. Those black bars appear only on the left and right side of the remote viewer window. Also in full screen mode the black bars sadly appear. Maybe the scaling mode is somehow disabled or my screen resolution of the host was wrong calculated related to that i can change the guest screen resolution but the spice remote client keeps its window size with the black bars. I was trying the last couple of days to resolve this issue, unfortunately without success.
View 10 Replies View Relatedi have a vsftpd server running well but i want to make/force all users to use sftp and not just ftp is this possible?
View 1 Replies View RelatedI'm trying to connect to my server (to the gnome session) using vnc. I run vino-server on debian
I get pass the authentication (configured none) but I get a blank screen instead of my session.
Log from vino on the console:
root@B10-20-30-4:/etc/vnc# /usr/lib/vino/vino-server
** (vino-server:2547): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-7l6BcHLxb5: Connection refused
(vino-server:2547): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion 'global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed
20/03/2016 05:20:28 PM WARNING: Width (3046) is not a multiple of 4. VncViewer has problems with that.
20/03/2016 05:20:28 PM Autoprobing TCP port in (all) network interface
20/03/2016 05:20:28 PM Listening IPv6://[::]:5900
[Code] .....
trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
I know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedI have done a minimal install of jessie stable on a 2004 laptop with openbox as the window manager. My problem is the nautilus connect-to-server returns "This file server type is not recognized" when entering sftp: or ssh: I have also tried installing Thunar with the same result. I can use cli and connect using both sftp and ssh.
View 3 Replies View RelatedI am using debian squeeze. I haven't changed much and I am a newb at this sorry. I can use the SFTP, but I can't use the FTP under any account. I can't find a conf file or anything for this.
View 8 Replies View RelatedAs a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies View RelatedI have Samsung NP145 with intel atom n450
And this is what terminal says: 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
Do graphical effects work on my netbook?