OpenSUSE Install :: Both From The Minimun Enviroment And From KDE And Got The Same Things On Text?
Apr 12, 2011
I didnt quite understand the guide on S2RAM. For example, when doing this:
Code:
linux-a7dy:/home/gabriel # s2ram -f -a3
switching from vt7 to vt1... succeeded
fbcon fb0 state 1
s2ram_do: No such device
fbcon fb0 state 0
switching back to vt7... succeeded
Does that mean it worked? I ran it both from the minimun enviroment and from KDE and got the same things on text, but no actual suspend of the system!
View 2 Replies
ADVERTISEMENT
Mar 26, 2011
I 've been trying to install Globalmenu menubar after having installed all the other Global menu packages that appear on the Ubuntu Software Center. I 'm using Ubuntu 10.10 with Gnome environment and mostly as a graphic environment (i don't have knowledge on source codes)..The error message that i get when i try to install the menubar is the following: Package dependencies cannot be resolvedThis error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.
View 9 Replies
View Related
Aug 19, 2011
Firefox informed me that I should get the latest version. I naively listened to that voice, and was taken to a download screen. I downloaded it. I was hoping for a self-installer, because I'm used to windows. It opened in KPackageKit, or something named similar. I extracted it to my documents, because frankly, I have no idea where to extract it to. Anywhere's I've looked says that most software comes as a package, which you can search for and install in YaST. I searched for "firefox", and nothing new came up. how to extract things to the right place/install them correctly with YaST?
View 2 Replies
View Related
Mar 12, 2011
I have a Tecra A7 with Intel 945GM. /boot is in a Ext4 partition and the rest is LVM2 splitten in 3 (/: Ext4, /home: Ext4 and swap). There is also a windows partition in the disk: I have installed openSUSE 11.4 (clean but keeping my /home directory untouched why is there since my openSUSE 11.2 installation). I have the following questions:
1.- During the installation I tried to shrink the windows partition and grow the LVM2 . The installer said that the partition was in use and could not be modified. I thought that during the installation the parititions where not mounted. Why is this? How can I grow now the physical volume (not the logical ones)?
2.- Solving this problem I realized that there a lot of duplicate files in .kde and .kde4. Can some of these be deleted?
3.- At boot, the computer frequently freezes after GRUB. Is right after selecting an option in GRUB, so it might be at mounting. In the failsafe configuration, it happens less frequently. How can I diagnose what is really going on?
4.- Every time I navigate into a webpage which contains a login form, Chrome ask me to unlock kdewallet. It is extremely annoying because this happens with all webpages, not just the ones in which I am registered.
View 1 Replies
View Related
Jan 15, 2011
Debian squeeze amd_65, using gde3/gnome.I'd like to use KMyMoney, but the latest packages (v4.5.2) and not the v3.9.8/test version that's in Synaptic Package Manager.I'd rather not install every package that contains *kde* in the name, but I'm more than willing to install the minimum required to compile and run them.Trying to build kmymoney v4.5.2. After some google searches on the specific errors, I initially learned about apt-file and the find feature.
I'm unable to determine what package I need for 'Boost', and although apt-file reports that kdepimlibs5-dev is the package for gpgme - I still have no files called QGpgmeConfig.cmake or qgpgme-config.cmake, and the log still shows 'Could NOT find QGpgme'.Any pointers on what package(s) I'm missing, or other ways to determine what I need?
View 3 Replies
View Related
Aug 11, 2011
I have a question regarding to the Graphical Splash Screen. Is their a way to show the text based startup on booting your OS? So. I don't the OpenSuse Background with the loading line. But i want the half transparent black background if possible or just the black background with all the loading texts. The black and white screen.
View 9 Replies
View Related
Jul 22, 2011
I'm working through some problems in a beginners programming book. The author mentions a formula for calculating the number of ways of picking out n things from a collection of m of them:
Code:
/ m m!
| | = -----------
n / n! (m-n)!
But he does not give a name for the formula. Does anyone happen to know what it is called? I need to do some related research.
View 3 Replies
View Related
Jan 28, 2010
Ive noticed this in 2 places specifically.The first is when I try to open the only "tarball" program Ive ever tried to install, Celtx. I unpacked the program into my bin folder, and when clicking (or double clicking) on either the executable file or the shell script nothing happens. If I double click on shell script, and then on the executable, I get an error saying "celtx is already running but not responding. To open a new window you must first close the existing celtx process, or restart your computer".
The second time is when I get a notice on my screen about new security updates available.I click on it, and it opens up the "software update" window with the updates it wants to nstall already checked. I click "install updates" and nothing happens. If I click the help button, it gives me an error "failed to execute child process "gnome-help"". Im guessing this one is because Im not using gnome, but XFCE. If I open up online update using yast, I can update from there and install these files fine.So basically the second problem is not that big of a deal, since Im able to install the files from a different area. Its just annoying and I dont know if it means there is a deeper bug in my system. The first problem makes me unable to run a program I really wan to run, so thats the one I really need the most help with.
View 9 Replies
View Related
Jan 31, 2010
Does a repo exist for this organizer program for openSuse? It looks like it has potential.
program is "Getting Things Gnome" GTG is in openSUSE repo's, but I'm looking for a third party repo to keep it updated.
View 4 Replies
View Related
Apr 5, 2011
I'm having problems installing Debian 6.0I can't load the graphical enviroment. I've tried the gnome and lxde but both of them freezes on screen.
View 1 Replies
View Related
Jun 22, 2011
I have a computer with Windows and I am running a Matlab program remotely in a Linux server. That (matlab) program will use an executable file (.exe) to analize some data; and that data will be used as input to a program that I can only run in the linux server.I need to run an executable file (.exe) from matlab in a linux enviroment. Is this possible?
View 13 Replies
View Related
Jun 28, 2011
I installed debian without a desktop enviroment. Say I next used aptitude to download and install openbox, ice, enlightenment, or some other window manager/ desktop enviroment. On the next boot up, would I get the command line or a login screen?
View 3 Replies
View Related
Oct 27, 2010
I am looking for a simple app that cut and past some thing that is been displayed on my desktop.
For example, I am writing a document and need to put a image there, but this image is in another document!
I do not know if I have made myself clear! If you guys did not understand I van try explain better!
View 3 Replies
View Related
Dec 19, 2009
Text does not scroll properly in terminal windows or in any KDE4 application window including Yast's windows.
When I scroll up or down the text either rolls in the upper line or two in a window or the lower line or two and nothing rolls in the middle.
View 1 Replies
View Related
Jan 7, 2010
I tried running the live cd of opensuse 11.2, everything works ok except all the text is microscopic, I can't see any thing to change any settings, I did mange to read that it had the right screen resolution under a icon of a display, this happens with Kubuntu to, Ubuntu and PCLinux work fine.I tried changing what I thought was the resolution settings but got the old black screen and signal out of range etc, is this just the live cd that causes this. Also is there a way to reboot if things go blank or freeze when running live cd's,
View 9 Replies
View Related
Apr 19, 2010
It takes about 25 seconds for my Grub to load, about 10-15 seconds of a black screen with flashing cursor before the first (Grub version 1.5 etc) message, then another ten seconds or so with the message "grub loading please wait" (from memory) before the menu appears. Is that normal for a system with three HDs and three different OS (SUSE 11.2 and 11,1, Ubuntu 10.04)? Maybe it is, but it would be nice to shave off a few seconds as Grub now takes longer than booting the OS... Also, when I set the resolution in YaST2 of the Bootloader to my maximum of 1920x1200 (24bit), I get scrolling text over the bootsplash which I didn't get when the resolution was set to the previous value of 1600x1200 (8bit).
View 9 Replies
View Related
Mar 7, 2011
how can i strip out the # command in CLI on openSUSE? or the exact way of this command in ubuntu
sh -c "grep -v -e '^#' /etc/squid/squid.conf.backup | cat -s > /etc/squid/squid.conf"
View 6 Replies
View Related
Jan 29, 2010
hows it goin ?? anyways i would like to know how to install firefox 3.6 and just to tell you that i used this tutorial to do it http://linuxhub.net/2009/11/how-to-install-firefox-3-6-on-ubuntu-karmic-koala/ and i did everything perfectly but at the end it told me to download a plug in which i dont want to ( not secure ) so i was just wondering if there was a way just to treplace the ubuntu version of firefox into to the Mozilla version ! how to run things in terminal
View 1 Replies
View Related
Feb 12, 2010
This is not Ubuntu-specific thing-y per se but i will go on. I cant connect to msn messenger service from my university's environment cause the administration has blocked all the ports that messenger needs.
I have a server in my home which runs Ubuntu and i would like to create a tunnel from my school to this server, and connect to messenger service through that tunnel, i have been trying to get this working with ssh, and i successfully made it in a test environment in my home, but the same thing wont work from school.
[Code]...
View 1 Replies
View Related
Apr 17, 2011
At least with 11.4 on a 12-core AMD, the NOUVEAU driver is a crock for this. Not merely does character reflection and many other things take ages, it dies horribly far too often. NVIDIA's driver seems better. This is purely for information, as my problem is solved for now.
View 7 Replies
View Related
Sep 28, 2010
I was using openSUSE, then went to Mint. Before I had to tinker with all sorts of settings, and things to get wireless internet to work. Ubuntu just detected what drivers I needed & its simply got my wireless to work all on its' own.
Is 11.3 similar? I want to move back to openSUSE, but I don't want to tinker with this. I want to use my time on the computer for more productive things.
View 6 Replies
View Related
Feb 28, 2010
When an installed package name appears red text in YaST, is it because the repository wasn't kept --- as in one-click remove the repository after install?
View 3 Replies
View Related
Dec 28, 2010
I installed OpenSUSE 11.3 in text only mode and on 1st console (tty1) I see background (wallpaper) and logo at upper left corner: I know that I can to disable this splash permanently (menu.lst) or temporarily ('echo 0 > /proc/splash'). How I can:
1. Change the background (/etc/bootsplash/themes - is this here?).
2. Change the logo on my picture
View 3 Replies
View Related
Sep 24, 2010
I'm at step 2c in the sticky "My wireless doesn't work - A primer." and yes, my HTC G1 phone isn't listed and your sticky says nothing more can be done. So, my question is how lsusb generates that list... Is it querying the device, extracts the information and prints that information to the display or is SuSE comparing whatever info is returned, matches that information (eg VendorID/ProductID) to a database of supported devices, then prints the result to display?
This is important, because if the former is true, then it looks like I may be SOL getting this to work in SuSE. If the latter is how things really work, then I assume that if I'm able to add an entry for my phone things can proceed.
View 9 Replies
View Related
Jul 27, 2010
When installer is loading linux kernel and it goes to 100%, the next thing that I can see is black screen and can just use shut-down button. This situation appears about 90% tries. After 7 reboots I installed Suse successful but the problem appears also now. Just after select Suse in GRUB, the screen print some text about half a second and it goes black. Sometime I can start system normal. I use openSUSE 11.3 Intel Core 2 Duo 2GHz, 4gb ram, Geforce 8600M GT graphic card
View 6 Replies
View Related
Jul 1, 2010
Running Opensuse 11.1 on an HP laptop. When I resume from hibernation or standby, I usually have to wait for about a minute for the wireless card to find my router. Is there any way to speed up this time to connect process ?
Interestingly when I boot from cold, the wireless connection is most times ready to go as soon as the boot has finished. So just wondering how I can make things quicker for resume from standby or hibernation
View 4 Replies
View Related
Jan 10, 2011
since some days I have a strange problem with KMail (1.13.5) in KDE4.5.5. When I try to copy some text from an email and past it to any other program (e.g. Openoffice), not only the marked text will be pasted, but a kind of HTML code including the text.
This bug is not OpenSuse specific. I found the same bug in a Fedora mailing list (of course, whithout an answer): Strange Copy/Paste behavior in KMail 1.13.5/Kontact 4.4.8
View 6 Replies
View Related
Jun 19, 2010
I am currently running OpenSuse newest version but this problem has been happening to every linux installation I have done. My Computer is a ACER ASPIRE 5515. Here are specs:
ProductAspire 5515
LanguageEnglish
ModelAspire 5515 Series
Specifications
Part Number
[code]....
Operating System Windows Vista Home Basic (Service Pack 1)(varies by model) Anyways here is what happens, and this only happens to me when i run linux. THIS NEVER HAPPENED WHILE RUNNING WINDOWS VISTA OR WINDOWS XP. First icons will disapear and text will not work, images wont be there, system dock and explorer will just not work, the start menu will have nothing in it, and when i restart it, (manual) it will boot and show me specs and say "NO OPERATING SYSTEM FOUND" and when i go into BIOS it says IDE0:_______ not the hard drive name and size like it usually does.
View 9 Replies
View Related
Mar 3, 2010
Have been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...
View 1 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
