I just noticed that my ClamAV is too old, and it will no longer start:
Starting ClamAV daemon: clamd LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
[code]...
Problem is, that there is no newer version for Debian Lenny.I did my aptitude-update and aptitude safe-upgrade, but nothing newer is available.I want to stay within stable (cuz it is a production server). What am I to do?
I'm getting this error when restarting clamav-daemon:clamd libClamAV Error: cli_dbgets: Line too long for provided bufferThis happened on two systems today after I upgraded via apt. Versions used: Debian Lenny w/ clamav-daemon 0.96.3+dfsg-1~volatile1Has anyone seen this and know what to do? clamd seems to be running, and the
I am running on a laptop and cron.daily is set to run at 0625 So I wonder what happens if my machine is not turned on at that time.. At that rate it could also be off for the other periods as well (weekly, monthly) Is there solution that will allow them to run once they are online after the appointed time? using a cron entry that runs every 15 or 5 or 1 minute.
I'm using Debian 5.0.4 Lenny. Daily my logs kern.log, messages, and syslog are filled with errors regarding dircolors: Quote: Aug 24 23:05:34 myserver.com kernel: [1906415.362252] dircolors[11556]: segfault at 0 ip 08049e30 sp bfffcd4c error 6 in dircolors[8048000+8000] Aug 24 23:08:02 myserver.com kernel: [1906563.298468] dircolors[12296]: segfault at 0 ip 08049e30 sp bffff61c error 6 in dircolors[8048000+8000] Aug 24 23:10:30 myserver.com kernel: [1906711.794160] dircolors[12914]: segfault at 0 ip 08049e30 sp bfffe8fc error 6 in dircolors[8048000+8000] etc...
I've googled this to death and still haven't found a solution to fix or stop this. I read on man dircolors to: dircolors --version The output I receive on this cmd is only: Segmentation fault I do: dircolors --print-database The output I pasted here since it is quite long: [URL] It ends with: .wav 00;36 Segmentation fault
I got my version of clamav working and it's fully updated. Problem is I can't seem to get my LibClamAV to function correctly. The output of #freshclam works But when I do: #service clamd.amavisd restart
This is the error:
LibClamAV Warning: *********************************************************** LibClamAV Warning: *** This version of the ClamAV engine is outdated. *** LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq *** LibClamAV Warning: ***********************************************************
My version is updtodate and I am unsure why the error. I am using amavisd-new-2.5.2 (20070627) and Clamav 0.95.3
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:
since I setup my system so that I'd receive system errors via email, I get an email each day from /etc/cron.daily/apt.Just wondering why this is, how I can fix it, or if I can just remove apt from cron.daily?uote:
To: root@jon-desktop Subject: fcron <systab@jon-desktop> run-parts --report /etc/cron.daily /etc/cron.daily/apt:
I was having a problem on my squid server whereby 1 website would timeout daily and return a nscd not found error: [url]....There may be other sites but this is the only one I know of. A selection of other sites still work correctly, which is the strange thing.I have found that by restarting the dns cache everything works again: /etc/init.d/nscd restart.I never know quite when this will timeout so it is not very good for people accessing that site on the server.
I installed Chromium Browser and made it default. The version which is available through squeeze and wheezy main is a dinosaur, and as such I cannot install any Chrome addons. I tried ubuntu or launchpad ppa for Chromium-Daily. I added [URL] maverick main to my Third party Repositories. Its not working.
The terminal returns an error: W: GPG error: [URL] maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9BF3BB4E5E17B5
Any attempt to load a webpage gives a Cannot Resolve Hostname error. i can ping [URL], but cannot load the page. However, the page will load by typing its IP address [URL] I have been trying to figure this out for days. cat /etc/resolv.conf nameserver 192.168.1.254
My problem is that my debian in hard drive 1 wont load, gives me a fatal error.
This is my computer: Hard drive 1 (1TB): broken debian 333gb, windows7 666GB (approximately) Hard drive 2 (250GB): debian (working fine, im using it now).
Details: I tried to install some webcam software thing and I think somehow i deleted some system files... ...So now when I start my computer, grub loads and i choose Debian on hard drive 1,i click it but when it goes through the list of things, it says
FATAL ERROR /lib/modules/2.6.32-5-amd64/kernel/fs/fuse/fuse.ko: No such file or directory
And it just goes to a blank screen with a blinking cursor.
Now that's not all. I did something else wrong... I ran Gparted from a usb stick to create an extra partition on hard drive 1 because i was trying to install another linux on it or something so I can access my computer.
But, when I tried to shrink it and create an extra partition on the disk of about 150gb, it was taking so long and i read that it may take about 40 hours, so i turned it off after a few hours. So, I may have created more problems than my original problem.... I can still boot into Windows 7 though.
So now i have: Hard drive 1 (1TB): broken debian about 120gb, windows7 666gb (approximately), free partition Hard drive 2 (250GB): debian (working fine, im using it now).
Also, of interest: When I look at the folders of the messed up debian, there is nothing in the /lib/modules/2.6.32-5-amd64/kernel folder. Empty.
So basically. my problem is that I get the fatal error, and then maybe i create some extra problem by stopping the partitioning when it wasnt done. so please help me try to fix the fatal error first
I am trying to build a test VM with VirtualBox 3.2.8, hosted on Ubuntu 10.04 amd64. I am trying to install Debian Squeeze from the daily build (specifically, from the following URL):
[URL]
(I've also tried the netinst ISO in the same directory.) The sha1sums are correct for each image.
When I start the VM, it refuses to boot, giving me the message "FATAL: No bootable medium found! System halted."
I would like to note that I've used VirtualBox for several years now, and GNU/Linux since 1995. So I have some experience in the field. (Of course experience is not much guard against brown-bag mistakes.) I've tried this same VM with an Ubuntu ISO (simply switching the attached ISO in the config), and it boots and installs OK.
Is there a known problem with the daily builds vs. VirtualBox?
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start then this $ /etc/init.d/httpd graceful
I haven't been able to use clamav for a few weeks now. The problem I am having is the share library libclamav.so.6 won't open. I have tried reinstalling it but that doesn't seem to work.
I reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
I dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
I installed few fonts in fedora. but after rebooting, fedora boots up but returns to run level 3. Showing an error: "Can't load 'fixed' font". error. I checked the /etc/inittab, the runlevel is defined as default 5. I think its the font problem, But i don't know how to reset & get back the 'fixed' font.
I have ubuntu 9.04 ultimate edition 2.4 ,I am getting grub load error 18 from many days .. how can i get rid of this problem .. i used to remove the jumper & CMOS battery of motherboard whenever i got this problem ,but now even that is also not helping .. for some 2 days there wont be any problem & then the problem again repeats
So after having performance issues with Karmic in ext4 I decided to install Hardy with ext3. Was blazing fast, epic, I loved it. But I wanted firefox 3.5 & all the other cool stuff Karmic has.. so I decide to install Karmic, but this time with ext3 instead of 4.
First installation: After the installation went fine, no errors while installing or anything. I remove the CD and reboot. "GRUB Loading, please wait.. Error 15" I did my googling, with the live CD to try and figure out a way of fixing this error. No luck. I did find out that the error is caused by the GRUB trying to load form the wrong drive. So I try to boot directly from the Karmic drive, Error 15. Try to boot directly from the Windows drive, Error 17.
This is the first time this has ever happened to me. First time installing Hardy, everything went great. Installing Jaunty, everything went great. Installing Karmic (for the first time) everything went great. Uninstalled Karmic and installed Hardy, everything went great. Uninstalled Hardy to install Karmic = FAIL!. I did a clean install every single time. The OS is being installed (clean) in the same drive.
A 40GB drive for Windows. A 200GB drive for Ubuntu +/home +swap, and a 120GB(FAT32) for storage.
I installed Karmic 3 times, yes.. 3 times. The last time I installed I removed both the 40GB & the 120GB drives. Leaving only the one I was going to use for Ubuntu, the 200GB drive. After the installation I rebooted and Karmic loaded without problems. I'm in Karmic right now and it isn't all sluggish like it was with ext4, guess my old drives aren't good with ext4 *sight*.
But I can't use my Windows drive. When trying to boot directly from it, it gives me "GRUB Error 17" - I have to disconnect the Ubuntu drive to boot into Windows. Quick question: What the **** is going on?
Someone help, please.. I'm tired of this ****.. and if I have to install Karmic one more time, I won't. I'll just give up and disconnect my Ubuntu drive, put it away and let it accumulate dust somewhere, seriously.. Someone help me correct this without having to install the OS again.
The GRUB error is while the GRUB is loading. It doesn't give me the option to select a OS.
I have windows xp and now I have installed UBUNTU 9.10. When my laptop starts it comes up with the option of Windows Xp and Ubuntu. Selecting windows xp works fine here but Selecting UBUNTU comes up with another screen giving three options.
1. UBUNTU 2. UBUNTU recovery and 3. Windows Xp
Selecting any of the above doesnt work here. With option 1 & 2 it gives the error message
This is the error message that appears when I try to run the application through the terminal - ERROR: Could not load classifier cascade /usr/share/opencv/haarcascades/haarcasca Could not initialize GStreamer: Error re-scanning registry , child terminated by signal
I've finally gotten around to installing Ubuntu 10.10. I currently have it installed on on a 320GB HDD. It's the 64bit. I also have Windows 7 x64 on a 1TB HDD. After I installed it, I keeping getting "Error: You Need To Load the Kernel First." Windows 7 boots up fine, but Ubuntu doesn't. I'm almost completely new to Ubuntu so I don't know how I would go about fixing this.
I have been loading Red Hat OS 5.5 x86_64 version in HP's Proliant DL 380 G7. One of the Server's after triggering the iLO and setting the Server to the determine the hostname so that, it can check the eth0 settings and then it probes for the video adapter, the screen goes completely blue and the characters that are on the screen at this point are not readable at all..Looks like to me the screen is throwing the system characters completely leaving no trace of what's going on. The screen is blue with those characters and the server is freezing...Looks like a hardware iLO issue, but not sure. When I restarted the server, it picked up the PXE boot and loaded windows upto the serial key and all that loading process was readable.
