Fedora Installation :: Update Error At Yum - Error Cannot Load Module

Jul 28, 2011

After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:

[code]...

View 8 Replies


ADVERTISEMENT

Fedora :: Error "Failed To Load Module "nvidia" (module-specific Error,0) No Drivers Available

May 1, 2011

I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.

View 5 Replies View Related

Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?

Jun 1, 2009

When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:

[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists

[code]...

Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.

Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.

View 3 Replies View Related

Fedora Installation :: Whenever Load The Url Http://localhost In Mozilla It Shows A Page Load Error?

Aug 8, 2010

I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,

$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful

[code]....

View 3 Replies View Related

Ubuntu :: ERROR: Unable To Load The Kernel Module Nvidia.ko

May 16, 2010

for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).

so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:

Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:

Quote: sudo nano /etc/modprobe.d/blacklist.conf

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv

[Code]...

View 5 Replies View Related

CentOS 5 :: DStat Error Message - Module Topio Failed To Load

Aug 8, 2010

I need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message

View 2 Replies View Related

Ubuntu Installation :: Getting "Module Unknown" Login Error After Update To 11.04 / Fix It?

May 1, 2011

I've just upgraded to Natty and lost ability to login through the Gnome login screen - "Module is unknown" message appears after I enter the correct password and hit "Enter".

I'm still able to switch to a text console and login there, both as root and as a restricted user.

Here is an excerpt from my /var/log/auth.log file code...

View 5 Replies View Related

OpenSUSE :: "canberra-gtk-module" Error Failed To Load Module "canberra-gtk-module"

Jan 28, 2010

OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!

now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more

View 3 Replies View Related

CentOS 5 :: Create New RAM Image File To Get Server Load Raid1 Module Upon Start - Mkinited Error No Kernel Available For 'inited-2.6.18-128.el5"

Nov 12, 2009

I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"

View 4 Replies View Related

Fedora Installation :: Crippling Graphics Error When Trying To Load Live CD

Aug 4, 2010

I'm not entirely new to Linux, but I'm far from a standard user. I decided to give it another try with Fedora on my new Asus G60JX laptop. Specs: Intel Core i5 430m, Nvidia GeForce GTX 360m, Windows 7 Home Premium 64bit.

When I attempt to run the live CD from either a physical CD or a bootable flash drive, it loads as usual. However, once Fedora goes to the desktop, I get this screen:

As you may be able to tell, it's a garbled version of the Windows desktop I had previous to the reboot. Evidently, something in my hardware is not supported. However, I fail to see how I can install drivers when this is literally all I can coax the computer into doing.

View 13 Replies View Related

General :: Update Manager - Error: You Need To Load The Kernel First

May 25, 2011

I updated the Ubuntu version 10.04.1. After updating the program it tells to restart the system. After restarting the system the following message appears:

error: can not read the linux header
error: you need to load the kernel first

View 4 Replies View Related

Fedora Installation :: How And When To Load Kernel Module In Boot Up Process?

Jul 19, 2010

For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.

View 8 Replies View Related

Fedora Installation :: Update Error Missing Dependency?

Sep 26, 2009

I got the following errors in spite of having both the packages installed. What can be done?

Quote:

gstreamer-plugins-bad-0.10.13-6.fc11.i586 from installed has depsolving problems
Missing Dependency: libass.so.3 is needed by package gstreamer-plugins-bad-0.10.13-6.fc11.i586 (installed)
Error: Missing Dependency: libass.so.3 is needed by package gstreamer-plugins-bad-0.10.13-6.fc11.i586 (installed)
code....

View 3 Replies View Related

Fedora Installation :: Getting Error When Running Auto Update

Oct 31, 2009

I keep getting this error when I try to run the auto update. b43 conflicts with broadcom-wl

View 2 Replies View Related

Fedora Installation :: Update - Unexpected Error And Could Not Continue

Apr 10, 2010

I just installed F12 lastnight and I went to run updates and the update manager said that there were unexpected errors and could not continue. I tried again today and same results. There are something like 321Mb of updates to run so...would be nice to get this machine updated.

View 2 Replies View Related

Fedora Installation :: Update - Error Getting Repository Data

May 5, 2010

I have just installed Fedora on my laptop. I tried to install the updates but there is something wrong:

Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)

View 2 Replies View Related

Fedora Installation :: Nvidia Error Cant Update The Driver?

Oct 30, 2010

a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error

4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:

[code]....

View 2 Replies View Related

Fedora Installation :: Yum Update Error Fc14 - Fc15

Apr 25, 2011

I have work through fedora project guides and got these messages beneath.

[code]...

View 4 Replies View Related

Fedora :: Error: "Can't Load 'fixed' Font". Error

May 28, 2011

I installed few fonts in fedora. but after rebooting, fedora boots up but returns to run level 3. Showing an error: "Can't load 'fixed' font". error. I checked the /etc/inittab, the runlevel is defined as default 5. I think its the font problem, But i don't know how to reset & get back the 'fixed' font.

View 2 Replies View Related

Fedora Installation :: Xfce - Update Chokes On Dependency Error

Mar 23, 2010

I am not having a lot of good fortune with Xfce, this time. The LiveCD had a kernal error, and after doing an install, the update chokes on dependency errors. I tried unchecking the problem update files, but then I ended up in a loop that I couldn't find what else was causing these problems. This doesn't seem to be a big problem listed in this forum, so how do I resolve this?

View 2 Replies View Related

Fedora Installation :: Can't Update Version 13 - ERROR With Rpm_check_debug Vs Depsolve

Mar 28, 2011

After I enter command: # yum update I got a output like below, and I don't know how to deal with it, i am a newbie.

[code]...

View 2 Replies View Related

Fedora Installation :: RPM Fusion Error - Can't Update Packages / Solve It?

Jun 1, 2011

I wanted to do a routine check/update today and I received this error code...

View 3 Replies View Related

Ubuntu :: Error While Hash Checking Of Torrent - The Sha Module Is Deprecated - Use The Hashlib Module Instead From Sha Import Sha

Jun 8, 2010

Code:

nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha

These errors occurred during execution:

[09:37:48] IOError - [Errno 5] Input/output error

Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.

View 2 Replies View Related

Fedora Installation :: F12 LiveCD Does Not Boot - Error "error:[drm:drm_mode_rmfb] *ERROR* Tried To Remove A Fb That We Didn't Own"

Dec 14, 2009

Make: Fujitsu-Siemens
Model: LifeBook P7120

For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'

The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.

[Code]...

View 1 Replies View Related

OpenSUSE Install :: Update Failure - "PackageKit Error Internal-error: Installation Aborted By User"

Jul 13, 2009

Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?

View 8 Replies View Related

Ubuntu Multimedia :: VLC No Longer Working After Update - Cannot Load Module

May 15, 2010

Since my latest update to Ubuntu Lucid, VLC is no longer working. When starting VLC, I get an impractical dark interface that doesn't response to any command.
vlc -v gives this output:

Code:
VLC media player 1.0.6 Goldeneye
[0x9d7f668] main libvlc warning: cannot load module `/usr/lib/vlc/gui/libqt4_plugin.so' (/usr/lib/vlc/gui/libqt4_plugin.so: undefined symbol: _ZN9QListData7append2ERKS_)
[0x9e2e6d0] main demux warning: no access_demux module matching "file" could be loaded
[0x9d7f668] main libvlc: Start vlc met standaardinterface. Gebruik 'cvlc' om vlc zonder interface te gebruiken.
[0x9e5bfa0] main generic error: no dialogs provider module matched "any"
[0xb7400e48] skins2 interface error: no suitable dialogs provider found (hint: compile the qt4 plugin, and make sure it is loaded properly)
[0xb7400e48] skins2 interface: skin: subX author: Martin Poehlmann
[0xb7400e48] skins2 interface warning: non-unique id: time
[0xb7400e48] skins2 interface warning: non-unique id: songticker
[0xb7400e48] skins2 interface warning: non-unique id: main.normal.dbuttons.info
[0xb7400e48] skins2 interface warning: non-unique id: eq.onoff.lef
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.menu
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.clos

It looks like a Qt4 problem, I have installed Qt4 with all possible dependencies, re-installed vlc several times but no effect! cvlc as proposed doesn't react.

View 4 Replies View Related

Ubuntu Installation :: VMWare Vsock Module Compilation Error?

Oct 14, 2010

I upgraded to 10.10 this morning and VMWare v7.1.2 (build 30145 failed to compile the necessary modules for it to startup. I found a patch that others have had success with here:[URL]

Code:
make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic'
CC [M] /tmp/vmware-root/modules/vsock-only/linux/af_vsock.o

[code]....

View 2 Replies View Related

Fedora :: Stopping VirtualBox Kernel Module Error

Jun 13, 2010

I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup

I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:

Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#

View 13 Replies View Related

Fedora Installation :: System Update - Error: Missing Dependency: Xine-lib(plugin-abi)(x86-32) = 1.25

Apr 17, 2009

When I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.

View 1 Replies View Related

Fedora Installation :: Error - Could Not Update ICE Autority File/home/shubhra/ICE Authority

Nov 14, 2009

I have changed my username in my fedora 11. on the next restart it asks for a login with my new username but when I enter my password it gives a errror "could not update ICE autority file/home/shubhra/ICE authority" when i click ok a next error comes "There is a problem with your configuration server(/usr/libexe/gconfg/sanity)" on clicking OK to this error a the blank screen comes with mouse pointer on it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved