I haven't been able to use clamav for a few weeks now. The problem I am having is the share library libclamav.so.6 won't open. I have tried reinstalling it but that doesn't seem to work.
[code]...
I am having a big problem trying to allow PHP to scan files, using clamav libs in PHP.
I downloaded the relevant files from:[url]
Anyways I am stuck on the tutorial for installing it in the 'INSTALL' file, where it says to run the command:
Quote:
It runs for a duration but then halts on the following error:
Quote:
It suggests that 'configure:3465' that the files where not found going by the line above that.
Not being in the default path, does anyone know where to make libclamav work?
An easier way of locating such files that it's looking for?
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:
[Code].....
which is a valid alternative (open source) to clamav?
View 2 Replies View RelatedI keep getting the message code...
I am not clear why clamd.log and freshclam keep changing permission and ownership to clamav.
I have installed ClamAV 0.95.3 into Ubuntu 9.10 (i386) fully patched
I am behind an authenticating proxy, so I've entered these details into freshclam.conf:
HTTPProxyServer myproxy.com
HTTPProxyPort 1234
HTTPProxyUsername myusername
HTTPProxyPassword mypass
code....
So I changed the perms to 0700 (user is clamav).
Now I get:
$ sudo freshclam
ERROR: Can't open/parse the config file /etc/clamav/freshclam.conf
I checked DNS resolution with this (which I found in a thread somewhere):
# host database.clamav.net
database.clamav.net is an alias for db.local.clamav.net.
db.local.clamav.net is an alias for db.other.clamav.net.
db.other.clamav.net has address 193.1.193.64
db.other.clamav.net has address 130.59.10.36
- I presume the installation can find the update site?
I am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
I am running the latest version, 10.04 and I am having problems importing music from my XP share. I can see my music in smb://squirrel/music The share on XP has full read/write perms. I then go Rhythmbox - Music - Import Folder and click on "music on squirrel" in "places" and I can see all of my dirs on the XP share. I then click on one directory and click "open" and Rhythmbox goes back to the main screen and there is nothing in Library - Music or anywhere else.
View 2 Replies View RelatedWhen I open an open office document from an NFS share it always opens as readonly. This was a problem I had on Arch linux and the fix was to change the locking options in the soffice script but I've tried that fix here and it doesn't work. I've seen a lot of discussions but they all go back to changing the locking options in soffice, has anyone got any alternative fixes or one that definitely works with locking?
View 4 Replies View RelatedI have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
I installed alsaequal URL....l and dependencies ladspa-sdk and caps, all via sbopkg.I'm getting this 'cannot open shared library' error even though that file does in fact exist at the indicated location.Has anyone run into this or successfully installed alsaequal? I also tried on a 13.1 install and got the same result.
View 4 Replies View RelatedThis started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
Is there a good open-source Unicode string library for C++ (or C)?
View 4 Replies View RelatedI've been building my digital music collection for some time and used to house it on a local drive with no quality issues. A while back I built myself a file server using ubuntu and mdadm in a raid1 configuration to protect against potential drive failure. I link my iTunes library to the music files via a samba share and everything works great on the surface. I've started to notice that random songs are becoming corrupted with pops clicks and silent pauses. I'll even re-download an album and notice that it's corrupted a few weeks later. Now I'm at a loss to what is causing this issue; I ignored it at first but it seems to be getting worse and more widespread as time goes on.
Do you think this could be caused by mdadm? It reports that all is fine via 'cat /process/mdstat' but I wouldn't know where to look or what to look for if there were syncing issues. The other possibility is that I have iTunes set to keep my music folder organized for me, but I've never heard of it actually corrupting the files it shuffles around. The bottom line is that my library is getting crappier as time goes on and I cannot stand for that!
Most of my gnome system administration tools are (suddenly) failing to open. The system is a new installation with both KDE and gnome, and the gnome system admin tools were working fine, but now they fail silently (nothing even in .xsession-errors). For instance, if I select Synaptic Package manager from the menu, I will get the gksu prompt to enter my administrative password, which I do. Then a notification will appear in the Taskbar "Granting Rights" and then after that nothing happens, it just fails silently. Note that this also happens if I enter 'gksu synaptic' or 'gksu /usr/sbin/synaptic' at the alt-F2 command line. Note that it doesn't seem to matter whether I check "Save Password for Session" or not. The same happens for time-admin, users-admin, etc. I have tried reinstalling gnome-system-tools, system-tools-backends, and gnome-keyring with no effect. I have googled extensively and have found a few other people with this same problem, but no solutions. Note also that kdesu does still work fine, and there doesn't seem to be any such problems in KDE in general. Only in gnome and with gksu.
P.S. Let me know if you need any more info (output from commands, files, etc).
I just noticed that my ClamAV is too old, and it will no longer start:
Starting ClamAV daemon: clamd LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
[code]...
Problem is, that there is no newer version for Debian Lenny.I did my aptitude-update and aptitude safe-upgrade, but nothing newer is available.I want to stay within stable (cuz it is a production server). What am I to do?
I got my version of clamav working and it's fully updated. Problem is I can't seem to get my LibClamAV to function correctly. The output of #freshclam works But when I do: #service clamd.amavisd restart
This is the error:
LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
My version is updtodate and I am unsure why the error. I am using amavisd-new-2.5.2 (20070627) and Clamav 0.95.3
anybody used or configured KOHA (an open source Integrated Library System) on windows Xp or vista
View 1 Replies View RelatedFirefox 3.1 beta 3 won't load. When I open the application, the little bouncy icon bounces, and the task manager shows "Firefox Web Browser", but this only stays this way for about 15 seconds then just goes away. No error or anything.
I've had this identical problem when I try to open certain programs with Wine too. Is there some place I can find a detailed error report on these failures?
I'm getting this error when restarting clamav-daemon:clamd libClamAV Error: cli_dbgets: Line too long for provided bufferThis happened on two systems today after I upgraded via apt. Versions used: Debian Lenny w/ clamav-daemon 0.96.3+dfsg-1~volatile1Has anyone seen this and know what to do? clamd seems to be running, and the
View 1 Replies View RelatedI have two computers at home both on Ubuntu 9.10.
Iam trying to get samba to work without password authentication. The smb.conf is the same on both machines beside netbios name and shares.
testparm gives
Code:
Load smb config files from /etc/samba/smb.conf
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
Processing section "[printers]"
Processing section "[print$]"
Processing section "[Home]"
[Code]....
I have a computer in another room of my house that I share the drive with my primary computer using NFS.
I just mount the network drive as normal in NFS. But I discovered today that I can't open openoffice files off of the drive. I have to copy them to the local disk first. I can open text files, pictures, pdfs. But .odt files will load the splash screen for open office, but go no further than that.
Anyone know how to fix this? It's kind of a killer for NFS for me. I really would like to be able to open documents over the network.
here's the settings I'm using in fstab in case those are wrong
Code: 192.168.0.3:/media/Data /media/Data nfs rw,hard,intr 0 0
./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.
I have a few ogg files that I want to put on my phone. My phone doesn't play oggs, so I need to convert. It's just an audiobook so I really don't care about quality. Oddly, nothing I try seems to be up to the task. Here's what I tried so far:
sox my.ogg my.mp3: "sox FAIL formats: can't open output file `x.mp3': SoX was compiled without MP3 encoding support" mencoder: wants video too?? Wha?? vlc (from GUI): "p, li { white-space: pre-wrapStreaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG Audio layer 1/2/3. If you don't know how to fix this, ask for support from your distribution.
This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue." lame my.ogg my.mp3: "sorry, vorbis support in LAME is deprecated." audicity (via GUI): success..but I'm now going to have to somehow script it. This is very annoying. It makes me want to rip directly into mp3 from now on. Is there an easy way to convert an ogg file to an mp3 from the command-line?
i am new using ubuntu 10.10 and so far i like it but the only thing i have problems is to be able to connect to the network i am running Windows 7 on the main pc and when i try to connect to the network (Click on Places, Network, Windows Network "icon appears" "right click on it" and get message Unable to mount location, "Failed to retrieve share list from server" i have try many solutions for the last 3 days but no luck can somebody i just want to share some music files and be able to connect to sound system and play the music
[Code]...
ubuntu 9.04 and win xppro i've been pounding my head aganst this for hours now. reading anything i can find samba works mostly shares created from nautilus work fine from both ubuntu and windows if i check to allow guest access if not i can not log in it does work in the nautilus browser fine. shouldn't make a difference but am using a virtualbox win xp guest shares work without issue. printers work here is a dump of my service defenitions
[global]
workgroup = HOME
server string = %h server (Samba, Ubuntu)
map to guest = Bad User
[code]....
I am planning to install any Open-Source ( LINUX ) web browser having all dependencies/plugin-ins on one single location [DIR] and share it over NFS to all other users; So all users can run the executable to start browsing local files (Flash Tutorials) without the need of installing a web browser on every single workstation. In my case I am using Red Hat Linux 4 update 7 WS all over my work place.
View 11 Replies View RelatedI'm reading about shared, static, and dynamic libraries. What is SDL? Is it static, shared, or dynamic?
I always thought a library would be a lot of .h and .cpp files compiled separately into .o files and then if you compiled your own program you could use the -l parameter to link the library and it was all compiled together. Now I'm not so sure.
I don't even see any SDL .cpp files in my system anywhere. All I have are lots of SDL .h files in /usr/include/SDL and I don't really understand the code in them.
I'm making a wild guess here: SDL is a shared library. SDL itself is NOT compiled into my program, therefore SDL must be on any system my program tries to run on. When I compile and link SDL all it needs is the header files to know what SDL function and objects it can use. And then on every system it uses an already compiled SDL shared library thingy somewhere.
So... where is that part of SDL? All I can find are header files.
I'm thinking the advantage of shared libraries is that someone could say update SDL on their own system and take advantage of the new features without having to download new executables with the new version of SDL compiled into them for every program that uses SDL.
So if I'm making an editor and a game engine and they both use a lot of the same .cpp and .h files that I wrote and I'm tired of updating one and then the other and I need to turn them into a library, then a shared library might be kind of a silly solution. I could just make a static library. Right? Because it's not SDL. Nobody else is ever going to use this library.
I can not edit my own .ppt file from samba share. Current desktop OS is windows 7. Samba server having RHEL 5 with following samba packages installed.
Code:
libsmbclient0-3.5.6-43.el5
pam_smb-1.1.7-7.2.1
pam_smb-1.1.7-7.2.1
I can able to edit and save the file if I copy this file from samba to local system. But from Samba share it open in read only mode.