I'm getting this error when restarting clamav-daemon:clamd libClamAV Error: cli_dbgets: Line too long for provided bufferThis happened on two systems today after I upgraded via apt. Versions used: Debian Lenny w/ clamav-daemon 0.96.3+dfsg-1~volatile1Has anyone seen this and know what to do? clamd seems to be running, and the
View 1 RepliesI just noticed that my ClamAV is too old, and it will no longer start:
Starting ClamAV daemon: clamd LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
[code]...
Problem is, that there is no newer version for Debian Lenny.I did my aptitude-update and aptitude safe-upgrade, but nothing newer is available.I want to stay within stable (cuz it is a production server). What am I to do?
I can't seem to get DivX streams to buffer long enough to watch them. I have installed DivX plugins and tried to use VLC, neither which, allow me to pause the video and allow the buffer to load. On Winblows and Mac, There was a different player that handled DivX streams that allowed for large buffering. I checked the /tmp folder while attempting to watch and the stream is not there. Is there another folder I should see the stream in? Is there a bug with the software, or can you only buffer DivX streams as long as they are running? I have a slow DSL connection and have no other way, other than torrents, to watch movies. And I would much rather wait a few minutes to watch the entire movie, than wait a few hours for the torrent to finish downloading.
View 2 Replies View RelatedThis started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
I got my version of clamav working and it's fully updated. Problem is I can't seem to get my LibClamAV to function correctly. The output of #freshclam works But when I do: #service clamd.amavisd restart
This is the error:
LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
My version is updtodate and I am unsure why the error. I am using amavisd-new-2.5.2 (20070627) and Clamav 0.95.3
I have problem starting clamd. It's unable to execute setgroups()
/etc/group , /etc/password files are world readable
Here is output after starting clamd:
sudo clamd
ERROR: setgroups() failed.
Here is strace clamd output:
...
open("/etc/passwd", O_RDONLY|0x80000 /* O_??? */) = 3
fcntl64(3, F_GETFD) = 0x1 (flags FD_CLOEXEC)
_llseek(3, 0, [0], SEEK_CUR) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=1616, ...}) = 0
mmap2(NULL, 1616, PROT_READ, MAP_SHARED, 3, 0) = 0xb7f6d000
_llseek(3, 1616, [1616], SEEK_SET) = 0
munmap(0xb7f6d000, 1616) = 0
close(3) = 0
setgroups32(1, [120]) = -1 EPERM (Operation not permitted)
write(2, "ERROR: setgroups() failed.
", 27ERROR: setgroups() failed.) = 27
exit_group(1) = ?
Process 29002 detached
ls -al /etc/group:
-rw-r--r-- 1 root root 1013 2010-03-19 11:38 /etc/group
ls -al /etc/passwd:
-rw-r--r-- 1 root root 1616 2010-03-05 12:39 /etc/passwd
/etc/passwd:
clamav:x:108:120::/var/lib/clamav:/bin/false
/etc/group:
clamav:x:120:
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:
[Code].....
Currently I have a single openldap server version 2.3.32 preforming authentication on our databases as well as e-mail and other assorted programs. When we get a high volume of users, sometimes the users can not be authenticated for new e-mail sessions and what not. We have traced it back to being that our current single ldap server can not authenticate them all in a timely manner. We decided that we would put up a new ldap server and replicate the changes to it, then upgrade the older server version and replicate back to it so that both would have a current up to date copy of our configuration, and we would do a master/slave type setup.
Trying to replicate between the old server and the new server is not currently working. Here is the issue: when we try to import the schema's from the older server we get this error: slapadd: dn="cn=Domain Users,ou=Groups,dc=mydomain,dc=com" (line=247): (65) no structural object class provided I can not seem to find any information on google that shows this exact error? if this isn't detailed enough let me know what else I should post.
i recently install openoffice in fedora 12 and error occured the error is : the action could not be completed because the name org.freedesktop.packagekit was not provided by any .service files. what is link to download latest openoffice for my fedora 12,?my laptop model is asus k50in.
View 1 Replies View RelatedI was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..
I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,
[code]....
I have a debian-504-i386-CD-1.iso installation CD and trying to install on a new Gigabyte M68M-S2P motherboard with 2GB ram on a new 80GB IDE hard drive.
I am choosing the Graphical Install and after about one minute I see a message:
Not using MMCONFIG
BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
Then after a few seconds another message: Trying to enable the frame buffer Then it just seems to hang the system
I have the latest BIOS installed for the motherboard and tried loading the BIOS fail safe settings and also the optimized settings.
I regularly compile something from a source repository that has a certain set of dependencies. Some of these dependencies are dev libraries that are provided via other libraries but are not considered installed packages in themselves, so I cannot test for some dependencies directly.
I am currently parsing an "apt-cache showpkg" output to check for some of these provided dependencies. This is somewhat kludge-y and messy, and I was looking for a more elegant solution.
Is there an APTITUDE option that will directly test for the presence of a library that is part of some other package without having to know the name of the package that the library is part of?
I have a one problem when i mapped a SAN to the linux box RHEL 5.3 i show the following messeage Buffer IO error on Device /dev/sdband unable to find it in fdisk -l
View 2 Replies View Relatedcciss :cmd ffff880074984e00 has check condition byte 2 = 0x3
Printk : 30 messages suppressed
Buffer I/O error on device cciss/c0d0p2 logical Block 2211585 to 2211594
I have an external usb disk connected to a Debian desktop. A couple of days ago these messages started appearing in dmesg
Code:
[154343.010908] EXT3-fs error (device sdb1): ext3_get_inode_loc: unable to read inode block - inode=14352940, block=57409572
[154343.014425] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #13272620 offset 0
[154343.014913] EXT3-fs error (device sdb1): ext3_find_entry: reading directory #3440641 offset 0
[154343.022172] Buffer I/O error on device sdb1, logical block 53138974
[154343.022209] lost page write due to I/O error on sdb1
[154343.022218] Buffer I/O error on device sdb1, logical block 53138976
[154343.022252] lost page write due to I/O error on sdb1
[154343.022256] Buffer I/O error on device sdb1, logical block 53138977
When this appears the disk becomes unavailable and I have to remove and plug it in and mount again. After that it works couple of hour and then the problem appears again. Is this a hardware problem?
I am trying to debug the issue of a desktop that has for the last two weeks started having kernel panics at boot time. This machine has been running flawlessly for the last 8 years, and has had three OS upgrades. I am using memtest to try to understand the issue. The following is part of the memtest output: Reading all physical volumes Buffer I/O error device hdc logical block 0 Buffer I/O error device hdc logical block 15
Illegal node for this track or incompatible media (asc=0x64 ascq=0x00) The failed "Read 10" packet command was /dev/hdc: read failed after 0 of 4096 at 0 Input/output error and similar set of mesaages After this udev checks correctly, and hardware, storage and audio are initialized However sometime in the middle of the boot process, a kernel panic occurs with message Kernel panic -- not symcing : Fatal exception in interrupt
I'm having a problem with my mail. When I send mail, it takes a long time for the send to complete.In the below, datestamp is just a simple script to put in a no-white-space date/time stamp.
Code:
$ datestamp ; mail woodnt; datestamp
02-05-10@193844
[code]....
I have 2 hdds, with encrypted / and /home. Besides there are four other (encrypted ext4) partitions I use rarely. In Fedora 11 at boottime I gave the luks passphrase for / and home and the system booted as intended.
Whenever I needed those extra encrypted partitions I mounted them in Nautilus. Now, in Fedora 12 at boottime dracut tries to open all the encrypted partitions, / and /home are mounted fine, but opening all the other partitions gave the following messages in messages.log:
Quote:
dracut: luksOpen /dev/sdb6 luks-02a0e706-a26f-4019-a2a0-88a0366a994d
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: device-mapper: ioctl: unable to remove open device temporary-cryptsetup-304
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: Buffer I/O error on device dm-0, logical block 124
[code]....
...and these messages are repeated with the other partiitions, and the boot time takes very, very long. How can I tell dracut to ignore those extra encrypted partitions at boottime?
I am facing a problem while installing backtrack 4.0 on my virtual box. After assigning a hard drive and booting from the live cd, i am receiving a error message as follows:
Loading, please wait...
Buffer I/O error on device hdc, logical block 76636
(this statement gets repeated like four times with different logical block id.
SQUASHFS error: squashfs_read_data failed to read block 0x5bb337b9
SQUASHFS error: unable to read is index table.
It is not the first time i install operating systems on virtual box though it is the first time i receive such an error with backtrack.
i have a inspiron 1520 laptop which is starting to slow down some so i thought linux would help because all i do is internet use, so i download it from another computer and mount it to a usb flash drive like the site says, (netbook remix latest version) then i put it in my laptop and it loads all the way and i press try and after about 10 minutes of loading it lets me try. so that was ok really slow but i thought id install it to hard drive to see if it improved speed. so the next time i start my laptop i get Buffer i/o error on device loop0 logical block xxxxxx so i redo the usbflashdrive no errors switch usb ports and same thing, ive done the switch usb ports and redo the flash drive about 4 times im really getting mad at linux before i even have it installed.
View 1 Replies View RelatedI had installed the CENT OS 5.3 it is installed when i rebooted it gives me error continuously.
Buffer I/O Error on device sda, Logical Block 0
ata4.00 : exception Emask 0x0 SAct 0x0 action 0x0 frozen ......
ata4.00 : status: { DRDY }
why it has giving the error.i have Intel based hardware Core II Duo with 1 GB ram check with sata hard drive 120 GB.
I just downloaded an iso of the latest CentOS dist (5.3) and burned it to disk. I booted from the CD and received the following error:
Memory for crash kernel (0x0 to 0x0) not within permissible range
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq-0x00)
The failed "read 10" packet command was:
Buffer I/O error on device hdd, logical block 176935
(This error message repeats for another 9 or 10 times then it says the following)
Red Hat nash version 5.1.19.6 starting
Setting up new root fs
(Then there are some unmounts which are old /dev, /proc, /sys. At this point a series of steps begin).
Setting Clock
Starting udev
Loading default keymap (us)
Setting hostname local host.localdomain
Setting up logical volume management
Checking file systems
These are just some of the steps that appear after the above error is displayed, all of the steps that load have an ok status. After those are completed I get to a text prompt - localhost login: At this point my keyboard does not seem to respond, pressing enter or any of the other keys seems to have no effect. I noticed that during the load process I could toggle the light for caps and num lock, but at the login screen it does'nt work. So at this point I'm not sure if I'm having a technical issue or if its just another case of an user error.
I have installed debian 8 on acer aspire one, all run well but when i do the Command's VT320, i have errors with HTTPS protocol ! Since the browser Iceweasel, the connexion of web sites HTTPS work well ! This is the sample of "apt-get" with google Chrome :
Code: Select allroot@sta-krups:/home/phipo# apt-get install chromium
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances   Â
Lecture des informations d'état... Fait
Paquets suggérés :
 chromium-l10n chromium-inspector
[Code] ....
I have checked if the problem is with Openssl, the server is installed, and work well.
Create symlink /dev/root and then exit this to continue the boot sequence.
Buffer I/O error on device sr0, logical block *******
sr 4:0:0:0 [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 4:0:0:0 [sr0] Sense Key : Medium Error [current]
sr 4:0:0:0 [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
end_request: I/O error, dev sr0, sector 1395920
Clocksource tsc unstable (delta = -499902943 ns)
loops that during install. new hard drive fresh out of box. WD 320GB 7200 Toshiba Qosmio intell core duo i've installed with this same disk before previous hard drive died. installed over windows vista. this time im trying to install solo no windows disk to reinstall with, F10 only. I've tried other distros as well, Mandriva one 2009, Dreamlinux, and this one. i've suspected hard drive controller went out but i can format and partition the drive. also the cd/dvd drive is bad but im booting from cd fine. tried removing the cd drive and booting from an external usb cd rom, same errors.
im about to deploy and need my computer up and running ASAP. 7 months no entertainment is not good. when i use a linux boot disk from Ultimate Boot Disk (UBD) i get an error of - hda status no response and something about invalid heads dreamlinux pushes past the error till i get the error about cant start x server. about my graphics
I created a start up USB and I try to install it on a computer I have, however, everytime I try I get the following error repeated...
[35.877830] end_request: I/O error, dev fd0, sector 0
[35.877869] Buffer I/O error on device fd0, logical block 0
emulate the USB using the force FDD option. I tried emulating a hard drive instead but then it doesn't boot up into ubuntu.
After reading a SDHC (camera) card with my computer in a non-HC compatible card reader, i guess i destroyed the partition table.
After getting a SDHC-compatible reader i found it seems there is no part. table on the card and no fdisk(1), badblocks(1) can read that card.
Seems they will wait forever to get a part table.
dmesg says:
How to recover the card?
I'm getting the following error Kpackagekit when I'm trying to refresh the packages, so I can manually check if there are any new updates. I have totally uninstalled the software, and reinstalled, but this has no effect. The following is what I see in a seperate popup.
Error Type:
Error Value: coercing to Unicode: need string or buffer, exceptions.SystemError found
File : /usr/share/PackageKit/helpers/apt/aptBackend.py, line 2216, in
main()
File : /usr/share/PackageKit/helpers/apt/aptBackend.py, line 2213, in main
run(args, options.single)
[Code]...
I am running the 64bit version of 10.04 on a dual core 2GB acer laptop.
When I plug in my iPhone to my 10.04 machine, it's recognized. I can always drag music from the iPhone to the Music collection in Rhythmbox, but 9 times out of 10 dragging the other ways gives me this error:
"Error while getting peer-to-peer dbus connection: The name :1.219 was not provided by any .service files"
how to increase the scroll-back buffer? In LXTerminal, I can only scroll back about three screens.
View 6 Replies View RelatedOS: Opensuse 11.4 Webcam: Bus 002 Device 002: ID 046d:08ac Logitech, Inc. QuickCam Cool Error Message: libv4l2: error allocating conversion buffer. The quality of my webcam output is very poor. I am uncertain as to what I can do to re
View 2 Replies View Related