I installed few fonts in fedora. but after rebooting, fedora boots up but returns to run level 3. Showing an error: "Can't load 'fixed' font". error. I checked the /etc/inittab, the runlevel is defined as default 5. I think its the font problem, But i don't know how to reset & get back the 'fixed' font.
View 2 RepliesI've installed Fontmatrix. It deactivates fonts correctly, but when I try to reactivate them, it does not do so, and gives this error message: "Fontmatrix has been unable to load the font in file /usr/share/fonts/truetype/ttf-liberation/LiberationMono-Bold.ttf. Please check missing files." It is still possible to reinstall them using Gnome Font Viewer. Does anyone know what to do about this?
View 5 Replies View RelatedI've just carried out an update and when I rebooted it won't let me passed the choose screen with Windows 7 or Ubuntu on it, I choose the Ubuntu and Error: unknown command - load font flashes for a second and then the machine reboots!I can't get any further into Ubuntu than that, any one have any ideas of how I can get back in????
View 2 Replies View RelatedAfter 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:
[code]...
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I'm running Windows 7 Pro 32-bit to access through ssh a RedHat Linux machine using the Cisco VPN client and Putty. I am trying to run x applications from the command window, but I get an error message that says "Cannot open 6x12 font." I am also using Xming to be able to connect to the x server. The x applications seem to run, but they will not give any figures or charts that the Linux machine alone will give me.
View 1 Replies View RelatedI reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedI am running the 32 bit version of Fedora 14. I have a provided program (not part of the Linux system) that notes "Cannot open font 9x15" and then crashes when it tries to do graphics. I have checked by using -fn in xterm and there is no 9x15 font. This agrees with xlsfonts. How do I get the 9x15 font installed on this system.
View 4 Replies View RelatedI dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
I'm not entirely new to Linux, but I'm far from a standard user. I decided to give it another try with Fedora on my new Asus G60JX laptop. Specs: Intel Core i5 430m, Nvidia GeForce GTX 360m, Windows 7 Home Premium 64bit.
When I attempt to run the live CD from either a physical CD or a bootable flash drive, it loads as usual. However, once Fedora goes to the desktop, I get this screen:
As you may be able to tell, it's a garbled version of the Windows desktop I had previous to the reboot. Evidently, something in my hardware is not supported. However, I fail to see how I can install drivers when this is literally all I can coax the computer into doing.
I have F14 x86_64 installation on my laptop. I once used latex vary well. After recent update of the system, there seems to be a latex font problem. When I ran xdvi, the dvi window flashed once and disappeared immediately.
The error in the terminal is:
Code:
$ xdvi ms
Warning: Missing charsets in String to FontSet conversion
Warning: Unable to load any usable fontset
Error: Aborting: no fontset found
I have xorg-x11-font-utils, xorg-x11-fonts-misc, xorg-x11-fonts-ISO8859-1-75dpi, and xorg-x11-fonts-ISO8859-1-100dpi installed. I then ran:
Code:
# yum install xorg-x11-fonts-ISO8859*
to install some extra fonts. But the problem remained. What shall I do?
I'm attempting to install ubuntu netbook on my Asus Netbook from a USB and I'm getting the following error as soon as it boots from the USB
"SYSLINUX 4.03 2010-10-22 EDD Load error - Boot error"
I havent started X in a LOOONG time because the console is more productive but when i tried i got a font error: Log may or may not be attached LOL links browser is buggy
View 9 Replies View RelatedWhen I run xload, it gives the following:
Code:
xload
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
It's an up-to-date Slackware64 current, with only ruby and poppler downgraded to 13.0, but I don't think either would do it.
It's not a big deal, but I wonder if it might be a sign of some bigger problem.
Make: Fujitsu-Siemens
Model: LifeBook P7120
For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'
The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.
[Code]...
I just upgraded my system from wheezy to jessie. For the most part, the upgrade was painless, but there's one bit of weirdness that I can't seem to fix on my own.
In my .Xdefaults, I set the font for Emacs with this line:
Code: Select allEmacs.font: -misc-fixed-medium-r-normal--13-*-*-*-*-*-iso8859-1
When I do this, however. the font that appears in Emacs is not any misc-fixed font. See the following image for what Emacs displays. The window for xfontsel shows what font it should be selecting.
Note that both emacs23 and emacs24 (both Debian packages) exhibit this behavior. I also see it with an installation of emacs24 that I compiled myself.
If I use xlsfonts to see what's available matching this pattern, four choices are presented:
Code: Select all$ xlsfonts | grep 'misc-fixed-medium-r-normal--13-.*-iso8859-1$'
-misc-fixed-medium-r-normal--13-100-100-100-c-70-iso8859-1
-misc-fixed-medium-r-normal--13-100-100-100-c-80-iso8859-1
-misc-fixed-medium-r-normal--13-120-75-75-c-70-iso8859-1
-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-1
If I change the font-spec in Emacs to specify one of the avgWidth parameters (70 or 80), then Emacs displays the correct font. Note that with this spec, Emacs's choice matches what xfontsel displays.
With avgWidth 70:
With avgWidth 80:
Why Emacs is using the wrong font family when the avgWidth is set to "*". As I understand X font strings, using "*" should make it pick either 70 or 80, but it clearly isn't doing that. A "*" worked with wheezy, so I'm assuming the upgrade changed my font configuration, but I don't know what it might have changed.
My gnome-font-viewer is missing. When i type it in the terminal i get the error :
Code:
But my gnome-control-center is already installed. Ive also tried to remove and reinstall it but it still makes no difference.
rencently, i move develop env from one linux machine to another, two linux have same gcc and make version, but at new linux machine make warning/error messages dont show color font(in old linux machine, warning messages is yellow, but now, it is white).so, when make, there are all white messages, i cant focus on warning and error.
View 1 Replies View Relatedi tried to install F12 x86_64 on my new hp dv7-3020 with nvidia GT 230M. I've update all the system but i cannot install video driver. I tried with the official driver released by nvidia (Linux x64 AMD64/EM64T Display Driver 190.53) but it gave me an error "unable to load nvidia.ko fedora 12".
View 14 Replies View RelatedI just made a fresh installation of Ubuntu Karmic, but I can't set up my screen resolution correctly. My monitor resolution (1680 x 1050) is not listed in 'Display Preferences' or in my card's proprietary software (ATI Catalyst). The maximum resolution I can select is 1440 x 900.xrandr detects a maximum resolution of 1440 x 1440 and displays the same list of screen resolutions as 'Display Preferences'.
But when I enter the line:
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
I always get this message:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 156 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
[code]....
I'm running Fedora 15 with Gnome 3. I installed Gnome-Do using 'yum install gnome-do'. I opened it from the Terminal by typing 'gnome-do' but I keep getting an error message that says
Could not load desktop item: libgnome-desktop-2.so.17
Gnome-Do opens but it doesn't display any application I search for and when I try opening the Gnome-Do preferences, it quits.
I installed gnome-desktop-2.32.0-8.fc16.i686.rpm from here: [url] and then installed Gnome-Do. Everything works fine now.
I have run into an issue with Fedora on my laptop that has me stumped. On this laptop I had partitioned the hard drive with Windows 7 (came with the PC), and initially Fedora 13. This setup worked fine for about four-five months, but recently Fedora will no longer boot. One day I attempted to load the OS and after GRUB get a screen that says "Error 28: Selected item cannot fit into memory." Windows continues to load fine however, and a memtest worked fine as well. When I attempted to run my Fedora 13 live-cd, I got the similar error "Error 28: Not enough memory to load this specified image."
Now, not having anything critical on the Unix partition, I decided to delete the Fedora partitions and start from scratch. I did so and the computer successfully loads a Fedora 14 live-cd albeit slowly (but still not the 13 one... I'm guessing the CD is just corrupted from scratches). Unfortunately, once I installed Fedora 14 on the empty space and tried running, I get my original error dealing with the item not fitting into memory. I'm out of ideas, and getting tired of the machine being Windows only.
The specs are as follows:
ASUS UL80VT Notebook
Intel U7300 1.3Ghz
4GB Ram
GRUB reports memory as:
607K lower / 14272 upper
I have a pdf file (nasm documentation) that used to be displayed perfectly with xpdf, but now all code example lines remain blank. On the terminal I get repeated lines such as:
Quote:
Error: Couldn't create a font for 'Courier Bold'
Error: Couldn't create a font for 'Courier'
I tried to figure out the problem... the same problem occurs with both evince and okular. However it does not occur when opening the same file under root (tested with xpdf), so it seems to be some permission problem. I tried searching on the error message but couldn't find a working solution.
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies View RelatedI have been trying to install MATLAB 2008b as a standalone version; however, every time when the process runs to 18% it shows an error as follows: "There was an error extracting the archives for MATLAB compiler. Chceck that you have enough disk space and rerun the installer."
I did have checked the disk space which is much more than enough. I have also changed few different disks that are way more than enough as well, about 5GB at least, but this error still popped out when it runs to 18%.
I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]
View 2 Replies View RelatedI open an ODS file and edit it and save, fine. But sometimes and for no readily apparent reason it refuses to save the document with the error message:"Error saving the document <filename>: Write error. The file could not be written". I have upgraded my version of OpenOffice but the issue remains. Once it starts with that error the only way to save the file is to actually abandon my change and restart OOffice. Today I lost an hours stuff as the auto save was also failing but not giving me any warning it was failing. I'm not sure if this is an OpenOffice, file system, Fedora or permissions issue though I've not noticed anything similar with other applications. Have set permissions to 777 but still get the error.
View 3 Replies View Related[code]...
How do I fix this?
I am facing some strange problem of mysql replication with ssl, my replications which working fine from more than 6 months currently stopped working after i upgrade mysql in to newver version mysql-5.1.41-2, i create new ssl self singed certs but still no sucess, when client try to connect the master using ssl its gives error SSL connection error ERROR 2026 (HY000), with out ssl its working f9.
Platform --> Fedora-11 + mysql-5.1.41-2 (both master/client)
I can seeking the problem on net, and i found the below bugzilla url related to that.
[url]
I read it but not get , either new version support x509 ssl certs or not or either new version support ssl replication or not, here below my server configuration for ssl serts
And for client
Both server and clients certs are signed with same ca but still its currently not working after the mysql upgrade first 5.1.41 and then 5.1.41-2
Either as above bugzilla url, currently mysql support ssl replication or not, or either some need to do special for working with ssl. or i wait for newver version of mysql to fix if its bug or not.