Debian Multimedia :: Screen Settings (resolution) Reset To Auto Daily
Sep 3, 2015
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
Just got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
So I know now that I reach the login screen, and I know to hit control, alt, f1. However, all attempts to reset the resolution have failed. Here's how it went down. I was working with nvidia driver. Already was frustrated I couldn't get a working wide screen setting for my toshiba hd tv/monitor but that's a seperate issue. I was trying to get the driver to recognize my separate monitor to an hd tv in the living room using the video out. works fine with windows. I got it to recognize, it made me save settings, and then restart. Note resolution settings are set to automatic right now. Then when I restart, I get to ubuntu splash screen, it plays the chime, and shows a blank black screen. Control alt f1 brings me the menu.
I have been told to type (this is just quick type, I used the proper commands in reality) sudo dpkg-reconfigure xserver-xorg. sudo dpkg-reconfigure -phighxserver - xorg xrandr --output lvds --mode 1024x768
I found one article that gave a three step process. sudo cp /etc/x11/xorg.conf / etc/x11/xorg.conf.custom sudo sh -c 'md5sum ' etc'/x11/xorg.conf > /var/lib/x11/xorg.conf.md5sum' sudo dpk-reconfigure xserver-xorg.
Nothing gave me any of the results I expected from command doesn't exist to completely irrelevant menus. Start me from the beginning to what I should do. Yes I logged in properly with my username and password to. Do the 'etc' in the command need to be filled with something else like a drive letter or something. I'm so lost, should I disconnect my tv? Also I tried running in safe mode and it said something about display not found.
I have just bought a new Acer 23" 1920x1080 flatscreen. I used to have an old fashioned 1280x1024 flatscreen.Now the problem is, every single time when I log on Ubuntu resets my screen res. to 1280x1024. So every time I have to use the Nvidia Settings to set my screen res to 1920x1080 and every time I have to place my panel widgets back in the right place and order, because of that, which is quite annoying.GDM has no problems though, it always displays in the right resolution.I use a Nvidia GeForce 6200 graphics card and the nvidia-current driver on Ubuntu 10.04 i386. I cannot use the Gnome monitors manager to set my resolution. Every time it sends me to Nvidia Settings.This is my Xorg.conf;
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
I'm on Debian testing Gnome 3.18 and I searched, tried, searched and tried... no way! numlock will always stays off whenever I reboot and reach login screen.
.... I checked bios settings > numlock is on - installed numlockx - added those lines to /etc/gdm3/Init/Default (if [ -x /usr/bin/numlockx ]; then /usr/bin/numlockx on fi) - checked dconf gnome /settings-daemon /peripherals /keyboard remember-numlock-state: true ....
I just changed the desktop on my thinkpad from awesome to i3. And now I have some very strange issues with the screen resolution. Because at home I use this x60 thinkpad on a dockingstation and a 19" display. As long as I used Awesome as my Desktop, the display manager as well as the desktop itself could handle the different screen resolution depending on if I'm out with just my 12" on my thinkpad or with the much bigger screen on my home 19" display.
I can understand that i3 maybe cannot handle this alone and I need xrandx to enforce the screen resolution. But why is the display manager (lightdm) also affected by this change? What is so different that even the DM cannot find the proper screen resolution?
I'm running debian lenny and want to change the screen resolution from 640x480 to 1024x768. I'm using a nVidia Geforce FX 5800 and I installed the additional nvidia drivers with the help of this tutorial [URL]. Here is my xorg.conf
I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:
# xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database.
Ive been googling for an hour, trying to remove everything named mplayer manually, but with no result. How on earth do i reset mplayer settings the default settings, or how to i remove it completley from my harddrive?
I am running on a laptop and cron.daily is set to run at 0625 So I wonder what happens if my machine is not turned on at that time.. At that rate it could also be off for the other periods as well (weekly, monthly) Is there solution that will allow them to run once they are online after the appointed time? using a cron entry that runs every 15 or 5 or 1 minute.
I have squeeze and need a bash script running with root privileges from xfce desktop to delete all PCI devices from /etc/udev/rules.d/70-persistent-net.rules and start dhclient on eth0 or eth1.
How to enable native screen resolution in X using VESA driver? I have IBM/Lenovo ThinkPad T61 with a native screen resolution of 1680x1050, but I am getting 1024x768 instead.
This is a fresh install of Debian 8.3 (latest stable) (Jessie).
The root cause of this is that nouveau graphics driver (which I was using before) was causing me kernel crashes. Full story here: [URL] .....
I am wanting to try to change my normal user (bbq) to a different screen size within my secondary user (lfs). I was wondering how one would do that.
This happened when OpenClonk changed my screen resolution and when i changed it back my screen blacked out (and me being the idiot save it).
Debian 8 GNOME
Also (a bit unrelated) could a video card problem cause a user to log out? I have been having some severe problems with my monitor and I am thinking it is th video card. Sometimes when I am starting a program my monitor will lose connection to my computer (HDMI signal not found) and I will either have to wait a few seconds and it will turn on or it will just stay blacked out.
I am running Debian on a g3 mac and when I set the screen resolution to 1024 by 768 I cannot see everything, for instance the scroll bar on iceweasal is hidden, so I switched the resolution to 800 by 600 and then i load up evolution and find that the forward button isn't visible, is there a way to get a custom resolution that works with everything
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found." (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
I've got a Disney edition Asus EeePC with an xp/9.10 nbr dual boot.The 9" screen has a native resolution of 1024x600, but in xp it can expand that to 1024x768- either by scrolling the desktop up and down a bit, or by what they call "LCD Compress" mode, where ever thing gets squished vertically a bit to fit 768pixels of info in 600 pixels of space.
My daughter uses it to play games on webkinz.com, and their games pop up on a 800px high non resizable or scrollable window, so there are controls and junk that fall off the bottom that can't be reached unless I'm put it in one of the 768 pixel modes. That, and with her task bar set to auto hide, she can play games and have a good time. how do I set up Ubuntu 9.10 to do the same thing? Right now, the only screen resolution in Ubuntu is 1024x600.
I've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
After installing some (much needed) upgrades, I am stuck being unable to install nvidia-settings after screen-resolution-extra upgraded from .11 to .13. Nvidia-settings, supposedly, requires .11. I can, of course, downgrade to .11, but I do not know if this is recommended. Is there anyway to get nvidia-settings back without downgrading? What is a good course of action?
I am loving Slackware, but my Westinghouse monitor is having a hard time recognizing the screen resolution. After typing in startx, I get a black screen. I can plug my box into my trusty test monitor, change the res to a config that the Westinghouse will recognize,then switch monitors and all is fine.How can I edit the res and have Slackware remember the settings? This happens every time I reboot. I am logging in as root, I have not added a user yet at this point.
Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
I just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
