Software :: Error - Freshclam Works LibClamAV Is Outdated
Nov 22, 2009
I got my version of clamav working and it's fully updated. Problem is I can't seem to get my LibClamAV to function correctly. The output of #freshclam works But when I do: #service clamd.amavisd restart
This is the error:
LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
My version is updtodate and I am unsure why the error. I am using amavisd-new-2.5.2 (20070627) and Clamav 0.95.3
View 4 Replies
ADVERTISEMENT
Oct 9, 2010
When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.
View 4 Replies
View Related
Jun 14, 2010
I just noticed that my ClamAV is too old, and it will no longer start:
Starting ClamAV daemon: clamd LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
[code]...
Problem is, that there is no newer version for Debian Lenny.I did my aptitude-update and aptitude safe-upgrade, but nothing newer is available.I want to stay within stable (cuz it is a production server). What am I to do?
View 3 Replies
View Related
Sep 27, 2010
I'm getting this error when restarting clamav-daemon:clamd libClamAV Error: cli_dbgets: Line too long for provided bufferThis happened on two systems today after I upgraded via apt. Versions used: Debian Lenny w/ clamav-daemon 0.96.3+dfsg-1~volatile1Has anyone seen this and know what to do? clamd seems to be running, and the
View 1 Replies
View Related
Sep 14, 2009
Is set up a postfix, dovecot + clamav server as described in the wiki. I also use the freshclam update script in /etc/cron.daily/freshclam. But my problem is i get this error message every day:
/etc/cron.daily/freshclam:
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log). ERROR: /var/log/clamav/freshclam.log is locked by another process
View 3 Replies
View Related
Jul 23, 2011
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:
[Code].....
View 3 Replies
View Related
Mar 25, 2011
I have a problem with updating files in the update manager. Each time i do an update a red exclamation mark shows up eith the following error message : The update information is outdated. This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon ant then selecting "check for updates"and check if some of the listed repositories fail. I tried doing this manually but nothing happens. I get a message saying that my system is up to date, and just underneath that it says "the package information was last updated 17 days ago".
View 8 Replies
View Related
Sep 23, 2010
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
View 7 Replies
View Related
Mar 23, 2011
I haven't been able to use clamav for a few weeks now. The problem I am having is the share library libclamav.so.6 won't open. I have tried reinstalling it but that doesn't seem to work.
[code]...
View 9 Replies
View Related
May 26, 2011
I am having a big problem trying to allow PHP to scan files, using clamav libs in PHP.
I downloaded the relevant files from:[url]
Anyways I am stuck on the tutorial for installing it in the 'INSTALL' file, where it says to run the command:
Quote:
It runs for a duration but then halts on the following error:
Quote:
It suggests that 'configure:3465' that the files where not found going by the line above that.
Not being in the default path, does anyone know where to make libclamav work?
An easier way of locating such files that it's looking for?
View 8 Replies
View Related
May 16, 2011
On a new machine (Ubuntu 10.04.2), the freshclam program (in the package clamav-freshclam version 0.96.5+dfsg-1ubuntu1.10.04.2) won't do updates. It fails on DNS queries. DNS is working for other programs OK. Diagnosis with tcpdump shows that it is sending the queries to 127.0.0.1 instead of the actual DNS servers designated in the /etc/resolv.conf file. Of course it won't get an answer because it is querying the wrong IP address. There is a --no-dns option which I tried, but that doesn't help. Any idea if freshclam or clamav needs its own config of DNS servers?
View 6 Replies
View Related
May 30, 2011
downloaded clamav and clam-db using install/remove software in opensuse 11.3 gnome.
tried to update virusdatabase typing freshclam in command-line
gives me this:
alexander@linux-y54v:~> freshclam
ERROR: Can't create temporary directory /var/lib/clamav/clamav-7d1c24383b9425dfebb5c660374d507b
Hint: The database directory must be writable for UID 1000 or GID 100
alexander@linux-y54v:
View 1 Replies
View Related
Apr 25, 2010
I have installed my first Ubuntu server today. It is connected to our corporate network. On this network there is a Windows 2008 R2 server that serves as DNS Exchange and file server. For some unknown reason this Windows server looses network connection when the ubuntu server comes online. After some investigation the network connection is instantly restored when I stop the clamav-freshclam service on the ubuntu server. When I start the service the network connection of the Windows server goes down.The only "link" with the Windows service and the Ubuntu server is that the Windows server is configure as the nameserver on the ubuntu server.
I want to run this in production because the ubuntu will serve as anti-spam server. I need to understand what is happing and why to prevent this.
View 1 Replies
View Related
May 16, 2011
On a new machine running Ubuntu 10.04.2, the freshclam program (in clamav-freshclam version 0.96.5+dfsg-1ubuntu1.10.04.2) won't do updates to the database. It fails on DNS queries. DNS works OK for other programs. The tcpdump command shows that it sends the queries to 127.0.0.1 instead of the correct DNS servers specified by /etc/resolv.conf. Of course it doesn't get an answer because it is asking the wrong IP address.
There is also a --no-dns option, but that didn't help/
Do I need to tell ot what the DNS servers are, somewhere?
Why would it query only 127.0.0.1 for DNS?
View 1 Replies
View Related
Jul 14, 2009
I keep getting the message code...
I am not clear why clamd.log and freshclam keep changing permission and ownership to clamav.
View 2 Replies
View Related
Jan 8, 2011
I can install clamav from SBo no problem, but the version is outdated. I downloaded the newer source code from clamav's site, edited the slackbuild to reflect the new version number, and rebuilt the package. But I get this following error when building.
Config files are installed in the proper places (except the file /etc/clamd.conf.rej referred to below which doesn't exist). But the binaries clamd and freshclam aren't installed anywhere.
Code:
make[2]: Leaving directory `/tmp/SBo/clamav-0.96.5/test'
Making all in clamdtop
make[2]: Entering directory `/tmp/SBo/clamav-0.96.5/clamdtop'
CC optparser.o
[Code]....
View 2 Replies
View Related
Jun 27, 2010
When I log on a root and attempt to issue the command Freshclam to upgrade the virus definitions it attempts or create a new file with a definition name. I get a message stating that the directory isnt writable. The user and group access rights are as follows:
USER = read, write, execute
Group = read, write, execute
All= read, execute.
The only way I can get around this is by applying a 777 which would be read, write and execute for all. Now, I have a group define with several user ids in it including Root.How do I connect the group with the directory/file so I dont have to apply a 777 access right to group users could issue the Freshclam command.
View 1 Replies
View Related
Mar 11, 2010
I have installed ClamAV 0.95.3 into Ubuntu 9.10 (i386) fully patched
I am behind an authenticating proxy, so I've entered these details into freshclam.conf:
HTTPProxyServer myproxy.com
HTTPProxyPort 1234
HTTPProxyUsername myusername
HTTPProxyPassword mypass
code....
So I changed the perms to 0700 (user is clamav).
Now I get:
$ sudo freshclam
ERROR: Can't open/parse the config file /etc/clamav/freshclam.conf
I checked DNS resolution with this (which I found in a thread somewhere):
# host database.clamav.net
database.clamav.net is an alias for db.local.clamav.net.
db.local.clamav.net is an alias for db.other.clamav.net.
db.other.clamav.net has address 193.1.193.64
db.other.clamav.net has address 130.59.10.36
- I presume the installation can find the update site?
View 3 Replies
View Related
Feb 25, 2011
I've been always curious why I have old versions of my software in my Debian's repository. As examples I checked my Apache, PHP and Octave versions. Each of them is outdated (Apache 2.2.16, newest is 2.2.17 | PHP 5.3.3-7 - newest is 5.3.5 | Octave 3.2.4 - newst is 3.4)! When I had Ubuntu there were always upgrades to the newest possible version. Actually I had really fewer problems with Ubuntu. ;/
How I can fix it?
My sources.list:
# deb cdrom:[Debian GNU/Linux 5.0.2 _Lenny_ - Official i386 DVD Binary-2 20090628-15:08]/ lenny contrib main
# deb cdrom:[Debian GNU/Linux 5.0.2 _Lenny_ - Official i386 DVD Binary-1 20090628-15:08]/ lenny contrib main
## security
deb http://security.debian.org/ testing/updates main contrib non-free
[Code]...
View 14 Replies
View Related
Jan 26, 2011
Wondered if anyone had a fix for this bug? I have been successfully updating my PC daily, however every now and again i get the warning triangle in the top right hand corner stating Update manger even thought updated almost daily reports "The package information was updated 26 days ago".
I have been into synaptic manager and slected best server for my updates and then i go into update manager and update the system, however, it doesnt solve it.
View 5 Replies
View Related
Jan 23, 2009
Someone told me that FC6 is outdated and no longer supported, So which version of linux should I choice?
View 2 Replies
View Related
May 17, 2010
I'm using debian etch - clamav.clamscan states: >> This version of the ClamAV engine is outdated.<<which is correct, my system is using 0.95.3 in vola you find 0.96
View 2 Replies
View Related
Nov 6, 2009
I created a local mirror with a DVD Image, is there a way to get this mirror to 5.4 now?I already updated the updates/extras repo, but now my main-repo is outdated and my updates go wrong.my directorystructure looks like this:
/server/rpmrepo/centos/5]
# ls
centosplus extras os updates
and the os folder:[code].....
View 3 Replies
View Related
Mar 24, 2010
Installed Redhat5 using NFS-server, but when tried to install packages in the newly installed client using:
all CD copied to /inst directory in NFS-server, where all rpm's can be found in /inst/Server/
What am I missing to make YUM work, in my local repository?
View 3 Replies
View Related
Jun 26, 2010
I'm using openSUSE 11.3 M7, recently I'm getting following message -
Code:
linux-kqyd:/home/anant # zypper up
PackageKit is blocking zypper. This happens if you have an updater applet or other software management application using PackageKit running.
Tell PackageKit to quit? [yes/no] (no): yes
[code]....
View 8 Replies
View Related
May 1, 2010
I've noticed a couple of times having comments about mplayer being outdated or that it needs updated since I installed Lucid a couple days ago. Anybody else having this issue? Or having trouble with mplayer?
View 9 Replies
View Related
Jan 12, 2011
I'm using Linux Mint Helena and my software sources seems outdated. I keep getting the error:
Code:
Could not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
[Code]...
Can I link to repositories which my system is not configured to, for example, could I include all the latest Debian, Ubuntu and Linux Mint 10 respositories (even though Iḿ using Linux Mint 8?
View 9 Replies
View Related
Oct 28, 2009
All of the 5.4 mirrors I've checked out have new packages in the updates repo added on 10/26 and 10/27, for both i386 and x86_64, but the repodata files haven't been updated since 10/19 so yum and reposync don't see them. how long this should usually take to update?
View 1 Replies
View Related
Jul 16, 2010
I'm having some trouble getting Miro updated. The package in Stable is 1.2.3-2, and I can't see all the online content because I don't have the 2.0 version. The thing is thar actually Miro is in its 3.0.1-2 version! I searched the package and is only found on testing (It's not in backports). I was wondering if I can install a package from testing in stable.
View 14 Replies
View Related
Dec 14, 2014
After the upgrade to Iceweasel 31.3, there has been messages popping up saying the browser has detected an outdated plugin and need your approval to run it. Since Debian is known for having old packages, I'd assume it's safe to ignore this message?
On another note, I visited a webpage but cannot load, it was blank. I visit the same website on another browser and it displays correctly. What could be wrong?
View 14 Replies
View Related
