Debian :: Wheezy Doesn't Login After Upgrading Linux-Headers

Jun 8, 2015

I tried to install "Wireless LAN" driver which wasn't installed by default on Debian Wheezy based on this DOC.

After I did all steps in that DOC, I've rebooted the system, and then Debian booted in TTY( gdm didn't start!!!!! )

and the main problem is I can't login to TTY and it say's "Login incorrect"!! (I'm sure the username and password is correct).

Overall :

1- GDM doesn't start
2- I can't login to TTY

View 14 Replies


ADVERTISEMENT

Debian Programming :: Linux Headers For Armhf And Gcc

Jun 24, 2015

I'm running debian testing on my armhf machine. I need to install linux headers after searching with apt-cache. I ran the command

Code: Select allsudo apt-get install linux-headers-3.16.0-4-all-armhf

But it says it will also install gcc-4.8.. I checked my gcc version which is 4.9. and running. sudo apt-get install gcc . says gcc is already the new version.How do i install the headers without installing gcc-4.8

View 3 Replies View Related

Debian :: Upgrading The Squeeze To Wheezy?

Jul 12, 2011

My Squeeze version is extension three and I had it loaded on my Seagate 1 TB SATA drive. Extension three Squeeze is still on the SATA drive. I loaded Wheezy on my 80 GB Western Digital IDE setup up as a master with my Plextor IDE CD/DVD ROM setup as the slave drive.

Squeeze on my version was LXDE and Wheezy on my version is Gnome gdm3. My Squeeze was loaded with Lilo 22.8 and my Wheezy worked with the regular bootloader. I am just wondering if I use Disk Utility to delete the extension three of Squeeze if it will make both versions unusable.

View 4 Replies View Related

Debian Installation :: Segmentation Fault When Upgrading From Wheezy To Jessie

May 11, 2015

A few days ago I bought a Raspberry PI B with Debian Wheezy (7.0 - I think) on it. Before installing a media centre on it I wanted to do some basic configuration/upgrade and decided to upgrade to Debian Jessie. I followed the instructions provided on [URL] .....

Before moving to Jessie I have upgraded the original Wheezy; after the upgrade the version was 7.8. Everything went well till I executed "apt-get dist-upgrade". Errors where generated. As suggested I tried the "apt-get -f install"; but it did not go smoothly either. However, so far, I am accessing the desktop and everything seems fine (although I did not do anything fancy yet). The version recorded is 8.0. Thus, should I worry about the error messages generated?

Please find the log file here: [URL] ......

Note that I put the log file on Google Drive because each time I clicked on "add file" in the "Upload Attachment" tab when editing this message I got:

Internal Server Error:
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, forum-admin@forums.debian.net and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.

View 7 Replies View Related

Debian :: Samba - 7.0 Wheezy And Windows 7 Cannot Login

Feb 23, 2016

I'm using Windows 7 & Debian Wheezy,and samba is the software that I use to share the folders/files for Linux & Windows.

The issue is one of my users(nv) cannot login to her folder in Linux using his windows credentials(the password keep prompt).But If I'm using my windows password she can access to her linux folder.But it is a temporary solution as when she restart the pc,the password authentication will prompt again.

This is my smb.conf file:
==============================================================================================
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example

[Code] .....

View 1 Replies View Related

Debian :: Bluetooth Mouse Doesn't Work In Wheezy

Aug 3, 2011

I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization

I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.

View 14 Replies View Related

Debian Hardware :: Wheezy Doesn't Properly Support Proprietary Firmware For Wireless Card

Mar 17, 2015

I recently installed the XFCE spin of Debian (amd64) on my Lenovo L440. I tried installing it before, but apparently the 3.2 kernel that ships with Wheezy doesn't properly support the proprietary firmware for the wireless card, blah blah. So I wound up using Windows 8.1 for a bit, and then Fedora (boo). Anyway, with the wheezy-backports kernel (3.16.7-ckt4-3~bpo70+1) everything works like a charm. Everything, that is, apart from the sound card — the entire system is completely mute. Well, apart from the system beeper. I searched the forum and found another thread, but that guy was (for some reason) just running dwm — I figured XFCE might feature a more complete sound system. But maybe the output he gave will be useful in my case as well:

Code: Select alleirik@gerhardsen:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
 
[code]...

I also tried running alsactl init (as root), which doesn't appear to have made any difference.

View 4 Replies View Related

Debian Hardware :: Doesn't Work Any AGP Card On Linux

Mar 19, 2011

I've got problem with my computer, any graphic card working under AGP port and any Linux based system.When I start my system with my graphic card in port AGP, the kernel panic appears.I tested on Linux: Ubuntu, Debian (few version from 7.10 to 9.10), Mint, OpenSUSE 10.3, 11.0), DSL. Always has been crash with kernel panic. Both live versions and installed tested.Working fine only on Linux Slitaz.I tested on GeForce4, GeForce2 and some old GPU from ATI. Computer works fine on built-in GPU Intel Extreme Graphics 2. Everything is fine under MS Windows. No problems. But I don't want to use Windows.

View 3 Replies View Related

Debian :: After Upgrading Game Doesn't Work / Fix It?

Jun 18, 2011

I have trouble with launch game on Debian 6(repo testing). code...

How to fix this trouble?

P.S. English — is not my native language.

View 5 Replies View Related

Debian Hardware :: Linux Non-free ATI Driver Causing Login Freeze

Oct 22, 2015

Whilst watching my system boot I see the following error:

'drm: radeon pci probe error kernel requires firmware non-free'.

When I install the ATI graphics driver, sure - I get all the screen resolutions I could possibly want, but the cost appears to be that it makes it causes my system to freeze at the user name and password screen. Sometimes the cursor blinks teasingly, but nothing appears as I type; sometimes the cursor itself is frozen.

My question isn't about the myriad of theoretical key combinations that might work - none of them have thus far.

I'm wondering whether I can simply continue using the default driver that the debian installer (ver. 8 stable 'Jessie') installed on my system. It's true that I only get 3 choices of screen resolution - 1152x864, 1024x768, and 800x600 - but my system seems so much more stable than when I install the proprietary ATI driver.

Aside from the login screen freezing - more often than not, strange things were happening keyboard wise - especially when composing posts for forums - the cursor would suddenly jump to another line of previously composed text for example!

So, can I keep the default driver or is it best to install the ATI driver and attempt to troubleshoot it? Is it even possible to troubleshoot a problematic driver - I knew how to do such things in Windows, but still learning about linux.

Also, when my system freezes at login (for whatever reason), if I'm obliged to simply hit the laptop power button to power down and press it again to restart - is this potentially damaging/corrupting my system - Debian, or indeed my hard drive?

Going forward, is the ATI driver issue likely be addressed in future Debian releases? Obviously, I would prefer to have the proper driver installed so as to have more screen resolution options - since I will be using my laptop for developing and testing web sites.

View 14 Replies View Related

Debian Hardware :: Network Card Doesn't Turn On Linux Mint - Failed Configuration

Nov 24, 2014

My card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.

And when I write ifconfig or iwconfig is displayed in the console interface wireless card.

And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.

I don't know what could have happened, I do not recall that I recently messed with the system.

Here are the pictures: [URL]....

And here I join dmesg.log file, at the end of a failed: [URL] ....

I have linux mint 17 quiana cinnamon

View 4 Replies View Related

Fedora Installation :: F13 To F14 No Shell At Login / After Upgrading Cant Login On User?

Jun 3, 2011

yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.

At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied

i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)

I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.

edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?

View 1 Replies View Related

Fedora :: Make Menuconfig Doesn't Find Ncurses Headers?

Jan 18, 2011

Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:

Code:
make menuconfig
*** Unable to find the ncurses libraries or the

[code]...

View 3 Replies View Related

Debian :: Why Doesn't Profile Load At Login With Lightdm

Apr 14, 2016

I have Debian 8.4.0 with lightdm. I'm trying to load some command lines at session startup, putting these in ~/.profile but the file is not loaded. The same procedure works well if I switch lightdm to gdm3.

Anyway, there is some idea to load some script lines at the session startup? The file .bash_profile neither works. I don't want to use ~/.bashrc because it would load every time I open a terminal. Neither to use init.d because it would load for all users.

View 4 Replies View Related

Debian Multimedia :: Desktop Sometimes Doesn't Load After Login?

Jul 19, 2011

Been running into a problem where the desktop won't load after I login. It'll just flash my wallpaper for a second and goes back to this blue-ish background and stays there, so the only solution I found was to just press and hold down the power switch, turn on the system again, and login again.

View 7 Replies View Related

Server :: Block Connections To Apache If Client Doesn't Have Valid Request Headers?

Feb 8, 2011

My server gets ddos attacks. I dig into access logs and I saw that attacker ips doesn't have valid requests headers, like their browser application info or requested url info.I want to close those connections immediately, and if it's possible block those ips for a time period.Can I do that with Apache and iptables?I searched on the internet but couldn't find useful results. Probably couldn't search for the right words.

View 2 Replies View Related

Debian :: Login Manager Doesn't Display On Testing IMac G3?

Aug 2, 2010

I've successfully installed Debian testing (squeeze) on my old iMac G3. I didn't select a desktop environment as a preconfigured package, but only left "standard system utilities" checked.Once I rebooted, I logged in as root (on the command line) and ran "apt-get install xfce4 xfce4-goodies gnome-icon-theme xdm", let all that pull in and installd then rebooted. As the system was booting, I could see all the services starting and whatnot, but when it gets to the line "Starting xdm..." the screen changes to black, but stays black for a good 2 minutes. I tried hitting some keys on the keyboard, as well as typingy login credentials, even though I can't see them, but nothing seems to work. I've tried rebooting several times

View 6 Replies View Related

Debian Multimedia :: Debian Wheezy Xfce4, No Reboot, No Shutdown?

Sep 3, 2011

i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)

View 3 Replies View Related

Debian Multimedia :: Debian Wheezy / Screen Blinking

Mar 30, 2011

I am giving Wheezy a whirl and am having with screen blinking ever 30 seconds.

View 5 Replies View Related

OpenSUSE :: KMail Doesn't Show "fancy" Headers Anymore?

Apr 2, 2010

On KMail (KDE 4.3.5), I normally had the "Fancy" Message Header style (which I like), but I wanted to inspect all the headers for one particular email, so I clicked View - Headers - All Headers.

That was a mistake. I can't get back to having KMail default to Fancy Message Headers - no matter what I select for an email, every new email shows up as "Standard Headers".

I can't find any options under Settings - Configure KMail that would control the default view. Does anyone know how I can get back to defaulting Fancy Message Headers?

View 2 Replies View Related

Debian :: Apt Stuck In Waiting For Headers 0%

Oct 24, 2015

I have the problem of app stalling at 0% when trying to update. I ran apt with the debug option

apt-get -o Debug::Acquire::http=true update

And I get the following:

Code:
Select all0% [Trabajando]GET http://security.debian.org/dists/wheezy/updates/Release.gpg HTTP/1.1
Host: security.debian.org
Cache-Control: max-age=0
User-Agent: Debian APT-HTTP/1.3 (0.9.7.9)

GET http://ftp.mx.debian.org/debian/dists/wheezy/Release.gpg HTTP/1.1
Host: ftp.mx.debian.org
Cache-Control: max-age=0
User-Agent: Debian APT-HTTP/1.3 (0.9.7.9)

After a while trying to update, it trows out this error:

Code:
Select allIgn http://ftp.mx.debian.org wheezy-updates/non-free Translation-en
W: Imposible obtener http://security.debian.org/dists/wheezy/updates/main/binary-amd64/Packages  503  DNS error for hostname security.debian.org: Name or service not known. If security.debian.org refers to a configured cache repository, please check the corresponding configuration file.

[Code] ....

I have tried changing repos, also i have verified with iceweasel the availability of the repo.

Ihave changed aldo the network setting from dhcpd to static.

I am using Debian wheezy, gnome desktop enviroment, although the DE is irrelevant.

My conections details:

Code:
Select all
eth0      Link encap:Ethernet  HWaddr 50:46:5d:b2:1b:2a 
          inet addr:192.168.2.14  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::5246:5dff:feb2:1b2a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:376446 errors:0 dropped:0 overruns:0 frame:0

[Code] .....

View 1 Replies View Related

General :: Login - Doesn't Give Me Any Option To Enter My Login Name And Password

Jan 1, 2011

I have no idea what happened to my OS(ubuntu10.04).it doesn't give me any option to enter my login name & passwd.i just get a blank(default) login screen.last time when it worked,i was trying to install GTK+2.8,but due to my mistake i deleted glib using cmd (sudo apt-get purge glib)and after that i even tried to launch terminal but it failed to launch.also tried to play media files using vlc but it didn't work.so i tried to restart my os and finally got stuck in the problem.i have no idea what to do,please help.Is there any cmd to see what problem occurred or which package is missing.

View 14 Replies View Related

Fedora :: FC9: Forgot - Partition Doesn't Work - Can't Login At The LUKS Login After Grub Starts

Feb 15, 2010

My computer was working this morning and both hard drives were working fine, then all of a sudden for about two hours I was stuck with this "problem", then after fumbling and moving and stablizing things, then Windows works? See below for details. I've finally reinstalled both hard drives, but the one with the Linux partition doesn't work: it says nothing is discovered on the disk. I can't login at the LUKS login after grub starts, therefore I can't get into Linux, but Windows works?! I used to be able to go directly into Grub when the computer starts, I forgot how to do that but it doesn't matter. If you need details I'd be glad to provide them. I just wondered why Linux doesn't work, but Windows does. I have Linux & Windows on two different separate hard drives

View 5 Replies View Related

Debian Configuration :: Installing Kernel 2.6.28.9 Headers?

Feb 3, 2010

I'm trying to install vmware server 2 on my lenny and first I must install the kernel headers but I'm having troubels with it.

apt-get install linux-headers-`uname -r`
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package linux-headers-2.6.28.9

I have even tried with apt-get install linux-headers-2.6.28.9 but same thing Searching apt-cache search linux-headers-2.6.28.9 shows nothing.

View 7 Replies View Related

Debian Configuration :: Locating Kernal 'C' Headers?

Jan 27, 2011

I am in process of installing a VMware tools PKg and am being asked for the path to the C headers for the kernel. I've browsed every folder, found lots of 'C' header files and tried these paths but none are being taken by the script. which path I need to provide for 'the C headers' for my kernel? running Piapix, Deb5. The os is running perfectly so I doubt there is error other than I am not 'wise' enough to locate these little buggers!

View 2 Replies View Related

Debian Multimedia :: Modify The Headers For Iceweasel?

May 12, 2011

There are some sites who are for example U.S.-only...Using Windows and Firefox, it often helped to just install Modify Headers, set it up correctly and you're done (it changes your ip-address you show to a website) Using a proxy really slows your connection down, but the app didn't.Is there an app for Iceweasel pretty the same, or at least one being able to do the same?

View 5 Replies View Related

Debian :: Squeeze Vs Wheezy ?

Nov 29, 2010

But when Squeeze goes from 'testing' to 'stable' in December... does Wheezy get promoted from 'sid/unstable' to 'testing' at the same time?.

I started my life in Linux with and currently use Ubuntu, and it runs decent(barely). However, I just upgraded to Ubuntu 10.10, and because of strange little issues and increasing bloatware, I have been forced to strongly consider the "mother OS": Debian.

The reason for my original question is that I want to run whatever the current "testing version" is. And if Wheezy gets promoted at the same time Squeeze does, then I will just wait the 4 weeks instead of slogging through another install(I prefer fresh installations vs upgrading within). I know the test versions of Debian are a bit more active than stable, but I have used Ubuntu for over 2 years, so I have some experience dealing with Terminal commands, package management, gnome, etc...I am also currently VirtualBoxing a copy of Squeeze.

View 6 Replies View Related

Debian :: How To Upgrade To Wheezy

May 20, 2011

I got "stuck" with stable up to now and want to upgrade to Wheezy. But, although I've done this before, I'm having a dependency problem I wanted to ask about before breaking my system somehow. This is the /etc/apt/sources.list, ready for Wheezy:

[URL]

So, I regularly use aptitude as my package manager. After updating the database with aptitude update, trying aptitude full-upgrade gives me a huge of conflicts.

[code]....

But, if I use apt-get dist-upgrade, I get no conflicts. if I dist-upgrade with apt-get, will that affect my daily usage of aptitude (which I prefer)? I know APT is a single database and apt-get and aptitude are just different interfaces, but I guess differences might rise when marking packages as automatically or manually installed.

View 7 Replies View Related

Debian :: Possible To Run Kde In Wheezy Without Udev?

Aug 7, 2011

Is it possible to run kde in Wheezy without udev? I am asking this because the modesetting failure is manifested as soon as udev tries to populate the /dev directory.

View 6 Replies View Related

Debian :: Can't Install JDK 8 In Wheezy

Apr 19, 2015

I dont want openjdk packages on my system, in Kubuntu I had a few troubles with them trying to make SqlDeveloper to work around. So this is what I see after a java -version:

Code: Select alledgardo@debian:~$ java -version
java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
edgardo@debian:~$

I've been uninstalling openjdk from synaptic and with other few commands on the terminal so far and I think I probably broke it. I have no /usr/lib/jvm folder only /usr/lib/java/jdk1.8.0_45.But everytime I wish to start up Eclipse it shows the logo for a few seconds and that's it.... never gets opened. And in /usr/bin$ I only have this symbolic link....

Code: Select alllrwxrwxrwx 1 root   root          22 abr 19 18:57 java -> /etc/alternatives/java

I've tried different tutorials I found surfing the web but none of 'em seem to work.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved