Debian Hardware :: Doesn't Work Any AGP Card On Linux
Mar 19, 2011
I've got problem with my computer, any graphic card working under AGP port and any Linux based system.When I start my system with my graphic card in port AGP, the kernel panic appears.I tested on Linux: Ubuntu, Debian (few version from 7.10 to 9.10), Mint, OpenSUSE 10.3, 11.0), DSL. Always has been crash with kernel panic. Both live versions and installed tested.Working fine only on Linux Slitaz.I tested on GeForce4, GeForce2 and some old GPU from ATI. Computer works fine on built-in GPU Intel Extreme Graphics 2. Everything is fine under MS Windows. No problems. But I don't want to use Windows.
My card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.
And when I write ifconfig or iwconfig is displayed in the console interface wireless card.
And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.
I don't know what could have happened, I do not recall that I recently messed with the system.
Here are the pictures: [URL]....
And here I join dmesg.log file, at the end of a failed: [URL] ....
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
I have problems installing and even running the live cd on a laptop with UEFI. I've tried various distributions and versions, change the UEFI to the legacy and messed with the windows settings, it did not work.
Debian 7.9: UEFI: Distorted picture, try to run the installation failed - black screen Legacy: Background looked OK but the same problem with installation program - black screen.
Debian 8: UEFI: Background picture looked ok but I had the same problem with black screen Legacy: same as up.
Ubuntu 12: UEFI: Don't even see cd as bootable media. Legacy: Grub runs ok but have black screen when trying to run live cd.
Ubuntu 14: UEFI: Grub seems ok but have black screen when running live cd. Legacy: same as up.
URL....I have exackly the same laptop - bought in that shop.I can be problem with graphic card. Intel HD graphics 5500
Getting Enemy Territory Quake wars to run in Sid? I have steam working, but I can't get the popular Linux title ETQW to work. First I was getting the typical error when ia32-libs is not installed. So instead I ran "apt-get install libsdl1.2debian:i386" and that seemed to make the game get further in boot instead of the lib error, however then I'm spammed with (to the point I can't scroll up to read the error)
pure virtual method called terminate called recursively pure virtual method called Segmentation fault
so I don't know what to do now, could it be as simple as installing more packages? I've had the game run flawlessly on wheezy before, never had this error before. I am using Sid with an ASUS AMD R7 370, open source driver, and kernel 4.3 same error when i drop to root permissions
I have HP 620 and i installed Fedora 14, but my wireless card doesn't work. My card is:02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) Under Live Ubuntu the card works very well, but under fedora doesn't work.It's look like the fedora doesn't a driver.
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
Yes, that's correct, it's a Celeron 400 running Xubuntu. And the card was working on 9.10, but not working anymore in 10.04 neither in 10.10.I've no other idea and I'm really considering moving back to 9.10Is there anything else I can check.
When I insert the xD card into the built-in 5 in 1 card reader of my laptop it doesn't work. An SD card for example does work with this reader, so it is not a "faulty hardware" problem we are talking about right now, and neither is a "HW is not recognized" kind of a problem. My card reader is seen as a
Code:0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)in the lspci output.I use debian testing with a 2.6.32-trunk kernel (what is this "trunk" here anyway?)I know this isn't a unique problem and with a cheap external USB powered card reader (I have one) this whole thing can be worked around, but still.
So here's the thing: I have a mobile broadband pcmcia card that worked just well on jaunty, but as I installed karmic it doesn't work, coz it mounts the card's storage but doesn't recognize the hardware. The help says I need the package 'udev-extras', but there's no such package for karmic and the one for jaunty doesn't work with karmic.
I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:
Code: $ sudo iwconfig wlan0 essid "apoint" key s:my_key_8 this error is returned: Code: Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.
i had an nvidia geforce 6800 card in my pc and that just all of a sudden stopped working (the screen went blank) so i went to my onboard video and it works but no matter what video card i install, it doesn't work (still a black screen) and i know the cards work on other pc's but just not this one. i've tried different ati cards and nvidia cards with no luck. i've also wanted to disable my onboard card all together but my bios doesn't have that option for some reason. i also thought that it might be the slot but when i install the video card in the pc, the fan works so it's not that.
I have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!
Code: [ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 16.280020] usb 1-5: device descriptor read/64, error -110 [ 17.375755] sky2 0000:02:00.0: eth0: enabling interface [ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load" [Code]......
I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.
But i have a few issues as well:
1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.
2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.
3. Arabic/persian fonts generally are not shown well in firefox?
4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?
5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?
6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet
7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.
I'm trying to install Debian on Dell XPS L501, and there are lots of problems...
1- Resolution is 800x600! I guess, I need to add that there is no xorg.conf file, and I couldn't create it by running `Xorg -configure`. It said the number of screens didn't match number of detected devices or something like that! I'd be really happy if this gets solved!
2- Ctrl+Alt+F1/2/3/4/... doesn't work! Sometimes Alt+Directional keys works. but most of the time it doesn't!
3- I can't get the loud speakers to work, and I couldn't compile Alsa from source... I'll try again, but does anyone know if there is a specific package I need to install to get them to work? (Realtek ID 665)
4- Keys are not working right... Function keys don't work... But the worse thing, is that if let's say Fn+F2 is supposed to disable wireless, F2 does!
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I decided to start of with Debian. I'm having trouble getting my wireless connection to work. I think i need drivers or something, i can't make a wireless connection. And it is a bit difficult for me, as i am new to Linux, and I'm not sure what I'm doing when i am writing these commands.
My wireless card is a Broadcom Corporation BCM43142 802.11b/g/n
I have been using Raspberry PI a little, so i am familiar with the terminal.
Im running Pure:Dyne, an audio-centric distro, and so far I have not been able to get my usb modem to work. Im using a Huawei EC168 and my carrier is Alltel. Im totally new to Debian as well... Im doing this off of a live disc then I plan to install it once I know Ill be able to use my internet (its my only internet...) The card doesnt seem to be recognized other than as a storage drive or something, since its preloaded with the software for windows that comes with it.
I'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows: # ifup wlan0
I get the following response: wmaster0: unknown hardware address type 801 wmaster0: unkown hardware address type 801 Listening on LPF/wlan0/00:1a:... Sending on LPF/wlan0/00:1a:... Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 No DHCPOFFERS received. No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows: auto lo iface lo inet loopback iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant.conf auto wlan0 and /etc/wpa_supplicant.conf looks like this: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 ap_scan=1 fast_reauth=1 network={ ssid="apt_102" scan_ssid=1 key_mgmt=WPA-PSK psk="mypassword" proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
I have a Thinkpad X220 (stretch/sid) with a built-in SD card reader.But when I plug in an SD card it won't show up in the file manager (thunar), nor as a /dev/sd* or /dev/mm*.. URL...
Code: Select all$ udisksctl status
Just my internal SSD shows up.How do I get my SD card reader to work?
I cannot log on. I don't know if this is related, I was setting up for remote desktop, setup a password for the remote session. After rebooting, my normal user and password do not work and my rdp password does not work.
I have a motherboard Gigabyte H110M-H DDR3 1.0 and a VGA Nvidia NVS 300 (It doesn't have HDMI connector, but after Debian installation, it shows audio HDMI), After installling Debian 8.4 Jessie amd64, I noticed the sound doesn't work, the motherboard audio codec is a Realtek ALC887, I don't have a HDMI Monitor, nor my VGA has HDMI Connector, but is a little bit strange that Debian recognizes HDMI Audio, if a run "# cat /proc/asound/cards" it shows me two audio cards, the HDMI and the ALC887 and if I run "# cat /procs/asound/modules", both cards are using snd_hda_intel. It is installed PulseAudio and Pavucontrol, I have checked if the audio was muted, but the sound volume is set to 100%, I don't know what to do anymore... I have a computer with a realtek codec too, but it's another model ALC665 or something like that, and the system is equipped with an ATI HD 5450 with HDMI Audio, I have checked the what modules the Debian is using, and both uses the snd_hda_intel, but the sound works with HDMI and Realtek Codec.
I'm trying to install Debian 5.0x to my miniITX computer.
Setup:
I had this setup running in a previous configuration. The only difference were the disks. I had a 120GB and a 1TB (/home). Because I need more space I swapped both disks for 2 x 2TB.
I tried a 64bit Debian 5.xx stable install. Everything goes fine until the first boot. After the POST and BIOS screen a cursor justs blinks and the computer does nothing. the computer doesn't start GRUB
Well I thought maybe a small error with downloading the DVD so I tried another debian but Testing now. There the setup hangs when it wants to make the file-systems. It says something like can't make ext4 filesystem. I also tried with ext3. So I manually tried to do fdisk and mkfs.ext4 (and mkfs.ext3) for both disks in the console during installation. fdisk works but when I try mkfs.ext4 /dev/sda1 it says that some bin-file is missing? How's that possible on an installation disc? Never ever had that before?
Well after 15 attempts (meanwhile lost 2kg of fingernails)I tried another 32 bit DVD install of Debian 5.xx. It can make the filesystems again and install everything but when it has to boot for the first time it just doesn't. I don't even see GRUB.
Seems to me that the computer doesn't refer to the HD to boot. In the BIOS the BOOT order is just fine (the previous config with the old HD's just worked fine). Even when I put in the install DVD it skips the HD and boots from the DVD?
I really don't get it. The disks are both shown in the BIOS. Is this a hardware or software issue? I think that Linux or GRUB should be able to work with 2TB discs isn't it?
