I have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.
View 2 RepliesSorry to post an answered question, but this site is google favorite, and I would like that this goes as easy as it can be for other users, so I'm hoping that if anybody searches for Epson Perfection V100 Photo for linux or Fedora Epson Perfection V100 finds this page.All the trick is to go to [URL]..
Install:
xsane
sane-backends (I installed this, but IDK if is necessary please some1 confirm this)
Download:
iscan-data-1.6.0-0.noarch.rpm
[Code]...
2.6.33.8-149.fc13.i686
When I was running FC10 my scanner just plugged in and worked. I must have lost something.
lsusb returns:
dmesg sees it. sane-find-scanner says:
scanimage -L returns:
And of course xsane/gimp say Not Avail. I've made sure all the (yum) sane sw is loaded and updated.
I switched from Sidux to Ubunbtu Lucid yesterday. On Sidux I had to struggle a little but to get this scanner working but at the end everything was fine. However on Lucid no success, I googled around and followed different instructions found in the www. sane-find-scanner and scanimage -L can find it (but it takes some time for scanimage -L) however I cannot scan and the scanner also does not react at all. The reaction of iscan and all the other scanning software is not consistent, error messages vary. A am thinking about switching back to some older Ubuntu version in case that I cannot get it running, I need the scanner in order to send fax
View 5 Replies View RelatedIn OpenSuse 10.3 I was able to use my Epson scanner using the plustek-driver.After upgrade to 11.2 I can not use it anymore.
sane-find-scanner recognized the scanner
found USB scanner (vendor=0x04b8 [EPSON], product=0x011d [EPSON Scanner], chip=LM9832/3) at libusb:006:002
[code]....
Doeas anyon know if rtcwake is supported on Sun V100 running Debian Lenny? See my attempt at using it below.
SV100-1:/sys/class/rtc# rtcwake -s 30
/sys/class/rtc/rtc0/device/power/wakeup: No such file or directory
rtcwake: /dev/rtc0 not enabled for wakeup events
SV100-1:/sys/class/rtc#
How to install Epson Perfection V350 photo on Debian squeeze 64bit?
When i start xsane the scanner do not exist
I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.
View 3 Replies View Relatedhere are files an instructions on how to Install "Epson Perfection V200 PHOTO" under Squeeze.within tar file there's a INSTALL readme file (.txt, .pdf, .odt)[URL]
View 2 Replies View RelatedWhere can I get a driver for my Epson Perfection 1204U? I am using UBUNTO.
View 4 Replies View Relatedi had this scanner working perfectly but now when i want to use it xsane returns this error:failed to open device 'snapscan:libusb:001:007':error during device I/Ounder ubuntu 9.04 i tried to change usb ports, disconnect and reconnect the scanner, reboot
View 5 Replies View Relatedal@ONE:~$ scanimage -Ldevice `epson2:libusb:001:016' is a Epson Perfection610 flatbed scannerScan error is returned in gscan2pdf saying 'invalid argument'Simple Scan says 'failed to scan' and 'unable to start scan' Scanning always worked with previous versions
View 1 Replies View RelatedI was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies View RelatedAfter downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
I have a debian server (squeezzy) amd 64, running with an epson BX-300f pluged to USB. And I want to share the scanner over my network. So let's do that, Intalled sane, sane utils, iscan, which I've downloaded from epson drivers and wich include epkowa drivers fro scanner to work..
after that I installed on my system (Ubuntu 9.10) xsane... on console I type:
root@bruno-laptop:/home/bruno# scanimage -L
*** glibc detected *** scanimage: free(): invalid pointer: 0x00be63d0 ***
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device 'v4l:/dev/video0' is a Noname HP Webcam virtual device
device 'net:192.168.0.254:gt68xx:libusb:001:035' is a unknown manufacturer unknown device -- use override to select flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
I don't know why I find so much things, if i only have one scanner. Then I opened xsane and found the scanner over network. I chose the epson with epkowa drivers I try to scan something but it dont output nothing and sometimes it gives me "end of file reached". I can put whatever config files here if you want to, just ask. One time it worked fine.. but only half of an image...
I just got an Epson Perfection V330 Photo scanner.After connecting it to Ubuntu 10.04, it's not recognized by XSane and Simple Scan.The relevant lsusb output:Bus 001 Device 008: ID 04b8:0142 Seiko Epson Corp.Google does not yet know "04b8:0142",.
View 5 Replies View RelatedI've installed the epkowa backend for the V300 scanner. Communications from Chuck56 and Alien Bob were helpful. The core, data, and esci-interpreter packages are installed, epkowa.conf and dll.conf seem properly configured. sand-find-scanner, lsusb, scanimage -L all report correctly. xsane works normally, and iscan initializes, and produces a preview image. scan however fails citing 'not enough space for operation,' although GBs are available. When iscan is closed, these errors are reported:
libpng warning: Application was compiled with png.h from libpng-1.2.8
libpng warning: Application is running with png.c from libpng-1.4.5
libpng warning: Incompatible libpng version in application and library
My system is running Slackware v. 13.37, Linux v. 2.6.37.6-smp.
I recently installed Fedora 14. Unfortunately, the scanner on my Epson CX3200 is not detected by the system. When i open 'Simple Scan', it shows i have a Epson CC-570L, and i don't know what to do to change it, so that it 'sees' my scanner. how i can change the scanner in 'Simple Scanner' to my CX3200?
View 2 Replies View RelatedLooking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????
View 1 Replies View RelatedI have Just got Fedora up and working and trying to setup my Epson V33 Scanner, I have downloaded the Driver packages from Avasys (http://avasys.jp/eng/linux_driver/) But when I try to install the iscan rpm package it tells me that I need libltdl.so.3, after doing some googling I have managed to find this rpm for Mandriva but I am unsure if installing this on Fedora would cause any problems?[URL].. When I looked on the Avasys site this is available as an rpm (or to be exact libltdl.so.7!)
View 1 Replies View RelatedI am running ubuntu 10.04. I have an Epson Wprkforce 310 4 in 1. Connection is USB. I can print. I have searched for proper drivers for scanner and fax. I have found nothing for fax. I have found and installed at one time or another the following scanner drivers:
iscan_2.21.0-6.ltdl7_i386.deb
iscan_2.26.1-3_i386.deb
iscan-data_1.6.0-0_all.deb
iscan_2.26.1-3.ltdl7_i386.deb
The 1st 3 installed but nothing happened. When I installed the 4th, I got a message telling me about the scan app I have installed(default with ubuntu install). Hope welled up inside. When I opened the scan app, it said it could not find a scanner. WF 310 was on hoping for a driver.
I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:
Code:
root@Shuttle:/home/tfrei# scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:
Code:
root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
my all-in-one Epson scanner does not work. I tried to install the iscan drivers (free and/or proprietary) via repository and/or via Avasys website, but nothing happens: the scanner is not recognized. I use Gnome and openSUSE 11.2
View 3 Replies View RelatedHaven't been able to get my scanner to work on my Epson Stylus CX7450. XSane doesn't seem to support my scanner. Is there a way around this?
View 3 Replies View RelatedHave an Epson Expression 1640 XL A3 scanner (usb & network interface card). Bus=0002 Device=004 its usb ID is 0x04b8 0x0109 I have never been able to connect the scanner using the network - if anybody can advise, I would be very grateful. Quite happy to use this if usb is going to be a problem The scanner has worked very well through the usb and wask working well with 9.04(32bit). I have bought a new machine and did a fresh install of 9.10 (64bit) and the scanner is not detected.
xsane detects my webcams (vl4:/dev/video*)but no scanner Have run sudo xsane-find-scanner - only the webcams are detected Have edited /etc/sane.d/epson2.conf - added scanner usb ID, and added the lines:- usb /dev/usb/scanner0 usb /dev/usbscanner0 as advised in one of the threads in this forum sudo scanimage -L gave this-
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video1' is a Noname Creative Labs Webcam Pro Ex virtual device
device `v4l:/dev/video0' is a Noname Logitech QuickCam Pro 4000 virtual device
[code]....
Do I need to select M for these three modules?
the following had [M] -
USB Printer support
Microtek X6USB scanner support
It looks like the scanner module has not been loaded, and possibly the usbfs yet usb webcam and card readers are accessible. I have tried to keep outputs relevant & short. If I have omitted anything, you would like full results or any other information.
I currently have an EPSON Stylus SX400 that I've connected to my Dell Desktop running Ubuntu Lucid Linux. Though Ubuntu installed the printer at a great speed , it didn't install the scanner. Where can I get drivers to install the scanners, all the software I use do not discover a device?
View 2 Replies View RelatedI've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:
1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.
I have an Epson CX4300 on Ubuntu 10.10 and I can't get it to scan. I loaded the driver for CX4200 since CX4300 isn't listed in [URL]
sane-find-scanner finds the scanner but scanimage doesn't:
ilan@ilan-main:~$ sane-find-scanner -q
found USB scanner (vendor=0x04b8, product=0x083f) at libusb:003:002
ilan@ilan-main:~$ scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
XSane also reports No Devices available and number 4 in their possible reasons is The backend is not loaded by SANE (man sane-dll). I get: ilan@ilan-main:~$ man sane-dll No manual entry for sane-dll
I do get a man for sane-epson so that hints that the epson driver exists. The fact that sane-dll doesn't seem to exist is probably the problem. I'm using libsane in the Synaptic Package Manager and that is supposed to supply the backends. Should it include sane-dll?
My printer failed recently and I was given a refurbished Epson stylus NX305 Printer scanner. Cannot get my system to recognize it. Running UberStudent (Debian based) Linux on a Dell Dimension. Have tried everything I could find on the web but nothing works. Scanner not recognized by software.
View 6 Replies View RelatedI have been given an Epson CX5000 3-in-1 that I only want to use the scanner part of (I have a laser and hate buying ink). The scanner works, tested under windoze, but xsane and scanimage -L fail to find it. But, lsusb does:
$ /sbin/lsusb
Bus 001 Device 003: ID 04b8:082b Seiko Epson Corp. Stylus DX5050
I saw a post about it under ubuntu that you had to modify
/etc/udev/rules.d/45-libsane.rules
Which doesn't exist on my Slackware 13 install. I hope this Epson runs faster than my Canon FB630U, which takes almost a four minutes to scan a 5x6 photo and forget scanning an 8.5x11 page (go take a nap).