Slackware :: Perfection V300 Photo USB Scanner - Fails Citing 'not Enough Space For Operation'
Jul 10, 2011
I've installed the epkowa backend for the V300 scanner. Communications from Chuck56 and Alien Bob were helpful. The core, data, and esci-interpreter packages are installed, epkowa.conf and dll.conf seem properly configured. sand-find-scanner, lsusb, scanimage -L all report correctly. xsane works normally, and iscan initializes, and produces a preview image. scan however fails citing 'not enough space for operation,' although GBs are available. When iscan is closed, these errors are reported:
libpng warning: Application was compiled with png.h from libpng-1.2.8
libpng warning: Application is running with png.c from libpng-1.4.5
libpng warning: Incompatible libpng version in application and library
My system is running Slackware v. 13.37, Linux v. 2.6.37.6-smp.
View 3 Replies
ADVERTISEMENT
May 3, 2010
I switched from Sidux to Ubunbtu Lucid yesterday. On Sidux I had to struggle a little but to get this scanner working but at the end everything was fine. However on Lucid no success, I googled around and followed different instructions found in the www. sane-find-scanner and scanimage -L can find it (but it takes some time for scanimage -L) however I cannot scan and the scanner also does not react at all. The reaction of iscan and all the other scanning software is not consistent, error messages vary. A am thinking about switching back to some older Ubuntu version in case that I cannot get it running, I need the scanner in order to send fax
View 5 Replies
View Related
Dec 5, 2010
Sorry to post an answered question, but this site is google favorite, and I would like that this goes as easy as it can be for other users, so I'm hoping that if anybody searches for Epson Perfection V100 Photo for linux or Fedora Epson Perfection V100 finds this page.All the trick is to go to [URL]..
Install:
xsane
sane-backends (I installed this, but IDK if is necessary please some1 confirm this)
Download:
iscan-data-1.6.0-0.noarch.rpm
[Code]...
View 1 Replies
View Related
Jan 23, 2011
How to install Epson Perfection V350 photo on Debian squeeze 64bit?
When i start xsane the scanner do not exist
View 1 Replies
View Related
Sep 2, 2010
2.6.33.8-149.fc13.i686
When I was running FC10 my scanner just plugged in and worked. I must have lost something.
lsusb returns:
dmesg sees it. sane-find-scanner says:
scanimage -L returns:
And of course xsane/gimp say Not Avail. I've made sure all the (yum) sane sw is loaded and updated.
View 2 Replies
View Related
Jan 13, 2011
I just got an Epson Perfection V330 Photo scanner.After connecting it to Ubuntu 10.04, it's not recognized by XSane and Simple Scan.The relevant lsusb output:Bus 001 Device 008: ID 04b8:0142 Seiko Epson Corp.Google does not yet know "04b8:0142",.
View 5 Replies
View Related
Jan 24, 2010
I have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.
View 2 Replies
View Related
Aug 29, 2010
here are files an instructions on how to Install "Epson Perfection V200 PHOTO" under Squeeze.within tar file there's a INSTALL readme file (.txt, .pdf, .odt)[URL]
View 2 Replies
View Related
Feb 12, 2011
I need to be able to open a photo manager and scan directly from within the program without opening a separate app. Is there one that does? I just installed Mint on my daughters laptop. Wow! I'm impressed. I tried a some Linux distros a few years ago and although I liked the idea, I just couldn't find one that impressed me. Things have changed since then! I tried 2 or 3 distros this past week and they all beat the pants off any version of Win... that I've used. I'm so impressed that I am now considering installing on my machine if I can find software replacements. If not, I may still do it and run Virtualbox when I need to. I need to start with the photo manager.
View 2 Replies
View Related
Aug 11, 2010
i need a way to convert the containers of PHOTO`s and AUDIO`s files to minimum space as possible
for example .wav to .mp3 and photo to convert to .jpg
prefer to use the command line in order to write a script
View 3 Replies
View Related
Jan 19, 2011
SELinux is enable on my system. When i try to carry out the below operation it fails, giving me te error below.I disable selinux before i was successful, but who can help me out to carry this excercise with selinux enable.
[root@wisetech ~]# mount /dev/cdrom /media
mount: block device /dev/cdrom is write-protected, mounting read-only
[root@wisetech ~]# cp -ar /dev/cdrom /media/. /inst
[code]....
View 4 Replies
View Related
Feb 16, 2010
I tried to move 2.7TB of data from my /var/webroot/ partition (4.5TB total in size). I left it to run over night, this morning when I came to check I saw that all data on / paratition is used up and no operations can be done because of the "no space left on device" message.
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d0p7 911G 911G 0 100% /
tmpfs 7.9G 0 7.9G 0% /lib/init/rw
[code]....
I freed up several hundred MB from / but still the usage is at 100% and I cant free up any more space or complete the transfer ?
View 1 Replies
View Related
May 7, 2009
Here's the deal: I had a nice little fileserver running under 2.6.27.21-170.2.56.fc10.x86_64.
3 disks in raid 5 ext4fs, then I thought..."hey I'm a greedy bastard..I want another drive!!
So I get it..do a normal mdadm --grow...after around 1100 minutes .. FINISHED!..whee..happy...
I decide to do a upgrade to 2.6.29.2-52.fc10.x86_64 to get the fix for growing the ext4..
reboot...
Code:
md: bind<sda3>
md: sdc3 has same UUID but different superblock to sda3
md: sdc3 has different UUID to sda3
md: export_rdev(sdc3)
md: sdd3 has same UUID but different superblock to sda3
[Code]....
View 5 Replies
View Related
May 23, 2011
Using 11.04. Every time I install a program (any source - software center, Update manager ) at the end of the installation message it says operation failed. But ... here is the big but. The software gets installed.
View 3 Replies
View Related
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
Jan 31, 2010
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
View 14 Replies
View Related
Dec 28, 2010
I have this Maxtor USB external HDD which I mount via dolphin-hal when needed. This HDD has a built in feature to 'sleep' if not used for some time, say 20 min. Now I don't want it to sleep because it irritates me to wait everytime for it to be active for use, so I figured crontab job should fulfill my requirement.
*Edit: I think a script needs to be executed every 15 minutes. The script has to do the following(I think):
Check to see if HDD is conected via USB:
If YES then - Do the below things
If NO - Do nothing
"Below Things":
Check if the ext4 fs is mounted on media/Maxtor-C; if yes then check if any file operation is being performed; if yes-do nothing, if no then write and remove an empty file. if hdd is connected but not mounted then hdparm -z /dev/sdxx (read partitions)
View 7 Replies
View Related
Apr 15, 2010
I recently downloaded the program cronometer (calorie counter) and I love it. It is run using a script I wrote (its a java program) that is in the directory of the program files (so the program does not appear under any of the application menus). The script functions only when it is in the destination folder. I did make the script executable. A symbolic link to the file also works but again, only when in the same folder. When I try to make a launcher on the desktop or in CairoDock, citing the script path as the command, nothing happens. I have tried it with both "bash" and "sh" prefixes on the command without success. Any ideas on how I could get this launcher to work?
View 1 Replies
View Related
Mar 5, 2010
I'm having problems getting my Canon MP-210 printer/scanner recognized as a scanner device in Slackware 13.0.CUPS setup was a breeze - in less than two seconds it was installed and within 10 more seconds it was printing a test page.Its URI is here, according to CUPS:
usb://Canon/MP210%20series (Printing works flawlessly).My non-privileged user account is a member of the 'wheel', 'scanner', and 'plugdev' groups in /etc/group (among the others recommended by the adduser script. I've tried running xsane as root (Still no devices found) with no success, and the CLI 'scanimage -L' doesn't produce anything either.They just report that there is no configured device.
I've run 'sane-find-scanner' and it reports the following:
Code:
found USB scanner (vendor=0x04a9 [Canon], product=0x1721 [MP210 series]) at libusb:001:003 Rebooting and unplugging/plugging in the scanner produces no positive results. /etc/sane.d/dll.conf has the following canon lines in it:
Code:
canon
canon630u
#canon_pp
I believe the appropriate entry is the canon630u.
/etc/sane.d/canon630u.conf contains the following:
Code:
# Options for the canonusb backend
# Autodetect the Canon CanoScan FB630u
usb 0x04a9 0x2204
[code]....
View 15 Replies
View Related
Mar 24, 2011
I have a Samsung SCX-4200. It was working pretty good with sane 1.0.21. I'm using slackware current, keeping updated (almost) every day. On the Mon Feb 28 update sane was updated to sane-1.0.22-i486-1. After that update xsane (as user) cannot find my scanner. I was able to find it running sane-find-scanner as root, but scanimage -L (as root) wasn't able to find the scanner. Now I have updated to the last sane package, named sane-1.0.22-i486-2 . In the changelog I can see that this rebuild should add libusb support.
In fact, now there's no way to find the scanner. And now also sane-find-scanner (as root) is no more able to detect the scanner, also running the command as root. I've tried running sane-find-scanner -v -v and scanimage -v -v -L but I can't get no useful hints. I have checked the sane configuration files but always seems good (the row with USB IDs is not commented in the backend file, which is xerox_mfp, and the backend is listed in dll.conf).
View 10 Replies
View Related
May 17, 2011
I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:
Code:
root@Shuttle:/home/tfrei# scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:
Code:
root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
View 6 Replies
View Related
Mar 30, 2010
I have been given an Epson CX5000 3-in-1 that I only want to use the scanner part of (I have a laser and hate buying ink). The scanner works, tested under windoze, but xsane and scanimage -L fail to find it. But, lsusb does:
$ /sbin/lsusb
Bus 001 Device 003: ID 04b8:082b Seiko Epson Corp. Stylus DX5050
I saw a post about it under ubuntu that you had to modify
/etc/udev/rules.d/45-libsane.rules
Which doesn't exist on my Slackware 13 install. I hope this Epson runs faster than my Canon FB630U, which takes almost a four minutes to scan a 5x6 photo and forget scanning an 8.5x11 page (go take a nap).
View 2 Replies
View Related
Jan 27, 2011
I've done some investigating on the threads, but none of the normal fixes for this permission problem work. I've added myself to the scanner and lp groups. I've also added the right device code to the epson configuration file under /etc/sane.d/ . Scanner is recognized and works under root.
When I "scanimage >somefile" in the console I get a permission error when I'm a regular user; when I do the same under root, it works. Likewise, my graphical scan frontends report that they cannot find the scanner when I am a regular user. I see alien bob had an old workaround at [url] but I don't think 13.1 has hotplug set up the same way anymore.
View 8 Replies
View Related
May 18, 2011
I'm trying to set up my EPSON Stylus TX120 multifunction, and i've successfully installed the printer, and for the scanner i followd the instructions from avasys page: installed iscan-data and iscan (core) compiling them from source with no problems using --prefix=/usr in both packages, but when i run sane-find-scanner no scanner is found. If i try using scanimage -L only my webcam is listed, so, is there anything else i have to do in order to get my scanner detected in slack 13.37? I've run both commands as root, by the way.
View 6 Replies
View Related
Jan 17, 2010
Slackware 13 64 bit Hp Photosmart c4280 USB (All-in-one)
- Printer successfully configured using CUPS
- Scanner only works when I am Root.
- When trying to access scanner as user it says there is no scanner attached.
What should be the groups for this user in order to access the scanner? Actually, they are: haldaemon, disk, audio, video, cdrom, plugdev, power, scanner, lp. Below are the outputs for sane-find-scanner (as both root and user), although, since the scanner works well under root, I am almost sure it is a problem with setting permissions and groups.
Quote:
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
View 2 Replies
View Related
Oct 25, 2010
I am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:
Code:
bash-4.1$ sane-find-scanner
...
[code]...
View 2 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Sep 23, 2010
Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
View 8 Replies
View Related
