here are files an instructions on how to Install "Epson Perfection V200 PHOTO" under Squeeze.within tar file there's a INSTALL readme file (.txt, .pdf, .odt)[URL]
View 2 RepliesHow to install Epson Perfection V350 photo on Debian squeeze 64bit?
When i start xsane the scanner do not exist
Sorry to post an answered question, but this site is google favorite, and I would like that this goes as easy as it can be for other users, so I'm hoping that if anybody searches for Epson Perfection V100 Photo for linux or Fedora Epson Perfection V100 finds this page.All the trick is to go to [URL]..
Install:
xsane
sane-backends (I installed this, but IDK if is necessary please some1 confirm this)
Download:
iscan-data-1.6.0-0.noarch.rpm
[Code]...
2.6.33.8-149.fc13.i686
When I was running FC10 my scanner just plugged in and worked. I must have lost something.
lsusb returns:
dmesg sees it. sane-find-scanner says:
scanimage -L returns:
And of course xsane/gimp say Not Avail. I've made sure all the (yum) sane sw is loaded and updated.
I just got an Epson Perfection V330 Photo scanner.After connecting it to Ubuntu 10.04, it's not recognized by XSane and Simple Scan.The relevant lsusb output:Bus 001 Device 008: ID 04b8:0142 Seiko Epson Corp.Google does not yet know "04b8:0142",.
View 5 Replies View RelatedI have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.
View 2 Replies View RelatedWhere can I get a driver for my Epson Perfection 1204U? I am using UBUNTO.
View 4 Replies View RelatedIn OpenSuse 10.3 I was able to use my Epson scanner using the plustek-driver.After upgrade to 11.2 I can not use it anymore.
sane-find-scanner recognized the scanner
found USB scanner (vendor=0x04b8 [EPSON], product=0x011d [EPSON Scanner], chip=LM9832/3) at libusb:006:002
[code]....
i had this scanner working perfectly but now when i want to use it xsane returns this error:failed to open device 'snapscan:libusb:001:007':error during device I/Ounder ubuntu 9.04 i tried to change usb ports, disconnect and reconnect the scanner, reboot
View 5 Replies View Relatedal@ONE:~$ scanimage -Ldevice `epson2:libusb:001:016' is a Epson Perfection610 flatbed scannerScan error is returned in gscan2pdf saying 'invalid argument'Simple Scan says 'failed to scan' and 'unable to start scan' Scanning always worked with previous versions
View 1 Replies View RelatedI've installed the epkowa backend for the V300 scanner. Communications from Chuck56 and Alien Bob were helpful. The core, data, and esci-interpreter packages are installed, epkowa.conf and dll.conf seem properly configured. sand-find-scanner, lsusb, scanimage -L all report correctly. xsane works normally, and iscan initializes, and produces a preview image. scan however fails citing 'not enough space for operation,' although GBs are available. When iscan is closed, these errors are reported:
libpng warning: Application was compiled with png.h from libpng-1.2.8
libpng warning: Application is running with png.c from libpng-1.4.5
libpng warning: Incompatible libpng version in application and library
My system is running Slackware v. 13.37, Linux v. 2.6.37.6-smp.
I switched from Sidux to Ubunbtu Lucid yesterday. On Sidux I had to struggle a little but to get this scanner working but at the end everything was fine. However on Lucid no success, I googled around and followed different instructions found in the www. sane-find-scanner and scanimage -L can find it (but it takes some time for scanimage -L) however I cannot scan and the scanner also does not react at all. The reaction of iscan and all the other scanning software is not consistent, error messages vary. A am thinking about switching back to some older Ubuntu version in case that I cannot get it running, I need the scanner in order to send fax
View 5 Replies View RelatedI'm trying to set up this printer with my Ubuntu OS (Lucid), but it doesn't seem to be working. I'm trying to install the driver for the printer but I keep getting:
Code:
eiven@eiven-laptop:~/Desktop/pipslite-1.4.0$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
[Code]...
I'm running OpenSUSE 11.0 (64 bit). I have an Epson Stylus Photo R300 printer that used to work just fine. Apparently there was an update to the CUPS software that I applied and now the printer is no longer working.
Through examining the error_log file in /var/log/cups I found that two files were missing from /usr/lib/cups/filter. These files existed in the /usr/lib64/cups/filter directory so I linked them to the /usr/lib/cups/filter directory. That cleared up two errors.
When I send a "Print Self Test Page" command from the CUPS Printers page, I get the following error:
Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/EPSON_Stylus_Photo_R300) from localhost
When I attempt to send a print job from an application like gedit or OpenOffice Writer, I get the following error:
Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/EPSON_Stylus_Photo_R300) from localhost
I've crawled all through the openSUSE forums and 'googled' all sorts of variations for these errors and found nothing useful. I'm hoping someone here might have a clue as to where I might go next to fix this.
Like I said, it was working before and now it's not so there must be something in a recent CUPS release that has messed things up.
i use linux OS with ubuntu and i have installed my printer (epson stylus photo tx650) but when i print it prints black pages on and on and doesn't stop,though if i print using my windows xp laptop and using the same USB cable, it prints,hence this shows me that some settings on printer configuration are not well set and i fail to know which are these settings. its only printing i cant do but i can scan and even photocopy.
View 3 Replies View RelatedThis is a file for printer drive Epson TX100, does any one know who to install it?
pips-snx100-debian4.0-3.3.0-CG.install
the original was :
pips-snx100-debian4.0-3.3.0-CG.tgz
trying to configure an old Epson LX 400 dot matrix printer with cups. I really need this printer to print vauchers. System is Debian SID, latest cups 1.4.3 cups was recently change to reject lsusb printing and now uses libusb. lsusb sees printer, but does not name it:
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1a40:0201 TERMINUS TECHNOLOGY INC.
[code]....
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedI installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedWhen I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies View RelatedWhen I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.
View 2 Replies View RelatedGot a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies View RelatedI installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....