Ubuntu :: Epson Stylus Cx4300 Scanner Not Working?
Jan 4, 2011
I have an Epson CX4300 on Ubuntu 10.10 and I can't get it to scan. I loaded the driver for CX4200 since CX4300 isn't listed in [URL]
sane-find-scanner finds the scanner but scanimage doesn't:
ilan@ilan-main:~$ sane-find-scanner -q
found USB scanner (vendor=0x04b8, product=0x083f) at libusb:003:002
ilan@ilan-main:~$ scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
XSane also reports No Devices available and number 4 in their possible reasons is The backend is not loaded by SANE (man sane-dll). I get: ilan@ilan-main:~$ man sane-dll No manual entry for sane-dll
I do get a man for sane-epson so that hints that the epson driver exists. The fact that sane-dll doesn't seem to exist is probably the problem. I'm using libsane in the Synaptic Package Manager and that is supposed to supply the backends. Should it include sane-dll?
View 6 Replies
ADVERTISEMENT
Feb 2, 2010
Haven't been able to get my scanner to work on my Epson Stylus CX7450. XSane doesn't seem to support my scanner. Is there a way around this?
View 3 Replies
View Related
Jun 22, 2010
We recently got an Epson Stylus TX550W Printer/Scanner unit, shared over Wi-Fi with both Windows/Ubuntu PC's, while I have the printing working flawlessly, I don't know where to start to get the scanner working. I've Googled, but haven't come up with much, checked the Ubuntu documentation, apparently Ubuntu (9.10 & earlier, nothing about 10.04) don't automatically detect networked printers, is there a way to get it to recognize without editing config files, which I hate doing? I'm using Ubuntu 10.04 64-bit.
View 3 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Jul 11, 2010
I currently have an EPSON Stylus SX400 that I've connected to my Dell Desktop running Ubuntu Lucid Linux. Though Ubuntu installed the printer at a great speed , it didn't install the scanner. Where can I get drivers to install the scanners, all the software I use do not discover a device?
View 2 Replies
View Related
Oct 17, 2010
My printer failed recently and I was given a refurbished Epson stylus NX305 Printer scanner. Cannot get my system to recognize it. Running UberStudent (Debian based) Linux on a Dell Dimension. Have tried everything I could find on the web but nothing works. Scanner not recognized by software.
View 6 Replies
View Related
May 18, 2011
I'm trying to set up my EPSON Stylus TX120 multifunction, and i've successfully installed the printer, and for the scanner i followd the instructions from avasys page: installed iscan-data and iscan (core) compiling them from source with no problems using --prefix=/usr in both packages, but when i run sane-find-scanner no scanner is found. If i try using scanimage -L only my webcam is listed, so, is there anything else i have to do in order to get my scanner detected in slack 13.37? I've run both commands as root, by the way.
View 6 Replies
View Related
Mar 17, 2011
I am trying to set up my Epson Stylus SX420W printer (via USB) on a fresh install of 11.4. I have found a driver called 'epson-inkjet-printer-nx420-1.0.0-1lsb3.2.x86_64.rpm', which I guess is right for my Intel Core i5-system on the Avasys-site that Epson refers to for Linux drivers.
I have downloaded the driver and installed it via Right-Click -> Open With -> Install/Remove Software, which seemed to go well. When I open Yast -> Hardware -> Printer -> Add, my printer is found all right, but 'No matching driver found'. Iam quite new to Linux.
View 9 Replies
View Related
Mar 24, 2011
I bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.
View 9 Replies
View Related
Aug 16, 2010
I have a Epson stylus T11 printer. It used to work fine with Ubuntu 9.04. After I upgraded my OS to 10.04, it is not working.
Here is my output.
It says its printing but doesnot print anything. I have tried a lot of forums including LQ, but no solutions.
The lsusb command gives me the follwing:
View 2 Replies
View Related
Jun 8, 2010
I have been using epson stylus T11 printer on ubuntu 9.10 for about six months, but after I upgraded it to 10.04, the printer is not working properly. It is working fine with other distributions.
View 1 Replies
View Related
May 28, 2010
I tried to connect this 3 in 1 device to opensuse 11.2 and none of the default drivers worked.
View 3 Replies
View Related
Dec 5, 2010
I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:
1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.
View 9 Replies
View Related
Mar 30, 2010
I have been given an Epson CX5000 3-in-1 that I only want to use the scanner part of (I have a laser and hate buying ink). The scanner works, tested under windoze, but xsane and scanimage -L fail to find it. But, lsusb does:
$ /sbin/lsusb
Bus 001 Device 003: ID 04b8:082b Seiko Epson Corp. Stylus DX5050
I saw a post about it under ubuntu that you had to modify
/etc/udev/rules.d/45-libsane.rules
Which doesn't exist on my Slackware 13 install. I hope this Epson runs faster than my Canon FB630U, which takes almost a four minutes to scan a 5x6 photo and forget scanning an 8.5x11 page (go take a nap).
View 2 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Apr 7, 2011
I've been using Ubuntu 10.10 for almost a year now and I'm really happy with it. I completely uninstall windows from my computer I'm able to do everything a used to do on Windows now on Linux, and even more... except for one thing... I cannot see the ink levels of my printer. It's a multifunction Epson Stylus TX110. I installed escputil and used the command "sudo escputil -i -u -r /dev/usblp0", the printer then starts making noise and no matter how long I wait, it never presents any info or displays the message: "device is busy" with no info about the ink levels.
View 6 Replies
View Related
Jan 14, 2010
I just got an epson stylus nx515 and I am currently hooking it up to a laptop running windows7. My next step is to hook it up to my computer running Kubuntu 9.10. I see no drivers or support for linux at epsons site. is there a patch that will let my printer software be installed on my computer?
View 1 Replies
View Related
Jun 9, 2010
I'm trying to set up this printer with my Ubuntu OS (Lucid), but it doesn't seem to be working. I'm trying to install the driver for the printer but I keep getting:
Code:
eiven@eiven-laptop:~/Desktop/pipslite-1.4.0$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
[Code]...
View 7 Replies
View Related
Mar 20, 2011
I've been having some problems recently with Ubuntu and my Printer. I find that when using ubuntu, ink drains much faster, and constant refills are required. I know the printer works fine, I use it on windows when ubuntu Fails. Today I was trying to print a colour document out, this was with default config, standard print quality etc., this was the result. On the left you can see the document before printing, and on the right the printed document. (Click to open image in new window)
Example 1 >
Example 2 >
How to just get normal quality printing, without having to revert to ... windows? How can I consult the ink levels of the DX4450 from Ubuntu. I have tried both MtInk and Epsutils and both failed.
View 5 Replies
View Related
Feb 6, 2010
Trying to get Ubuntu to print to my Epson STYLUS SX515W, without much success. All OK with Windows but not with Linux.
Pipslite-wrapper appears to be missing. I have Googled but with no success.
View 1 Replies
View Related
Jul 30, 2010
I made a fresh install of openSuse 11.3 and can't make to work my printer (Epson Stylus T23) The system detected the printer, and I installed "pips-st20-SuSE10.3-3.1.0-CG.install" driver. In this way, printer work properly in openSuse 11.2
I installed "gutenprint 5.2.5-1lsb3.2" as suggested at 11.2 upgrade to 11.3 - Epson printer broken.
Anyway, when I send something to print, CUPS say:
Printer status: Idle - "Processing page 1..."
Job state: stopped
"/usr/lib/cups/filter/pips-wrapper failed"
View 2 Replies
View Related
Jan 4, 2010
Did someone has been able to compile pipslite_1.4.0-5.tar.gz and iscan_2.23.0-3.tar.gz (avasys drivers) on fedora 12? I have an epson stylus sx600fw and it was working perfectly in fedora 9 with the avasys drivers but after upgrade to f12 I cannot install the new driver
View 9 Replies
View Related
Jun 8, 2010
Just changed my Canon Mp160 for this Epson Stylus TX115. I looked on Epson's site but couldnt find a Linux driver. How to be able to get this printer working?
View 1 Replies
View Related
May 5, 2010
I'm trying to set-up my Epson printer on my PC running on CentOS but have not had much success.
View 3 Replies
View Related
Aug 7, 2010
Epson stylus d88 recognised by 10.04 no tests or maintenance available in local host and obviously not printing. It's like it's there but they cannot talk to each other
View 3 Replies
View Related
Dec 30, 2009
Now to printers. The system searched for drivers-not found. This one doesn't seem to be supported. But is it ok to install some epson driver which would be closest to this model? And I count that only printing will work, but not scanning.
View 3 Replies
View Related
Jan 20, 2010
I'm new to openSUSE and have only used Ubuntu. I have a Epson Stylus NX110 all in one printer. All I really care about is the print capabilities, scanning is a secondary issue. Suse recognizes the printer but doesn't have a driver for it. On Ubuntu I had to use the NX105 drivers but they worked just fine.
View 3 Replies
View Related
Jul 8, 2010
just started to use Linux and after installing a few distro's have settled for Opensuse 11.2 gnome as it suits me, however i seem to be having problems finding a driver for the Epson Stylus R240 printer. Is there an alternative driver that is compatible for this printer, (I really don't want to have to go back to windows because of a printer driver)
View 5 Replies
View Related
Dec 29, 2010
I am searching for a printer driver for my Epson Stylus NX420 Printer/Scanner. Should I use a generic Epson driver from the extensive default list, or is there a better driver out there? re: I'm running OpenSuse 11.2 and KDE
View 1 Replies
View Related
Jan 12, 2011
I am unable to install the drivers in OpenSuse 11.3 for an Epson Stylus SX218. The printer is not Linux friendly and the drivers hard to find but I have been able to install it in Ubuntu 10.04 and thought the procedure would be the same but it is not.
View 9 Replies
View Related
