Fedora :: Setup Epson V33 Scanner?
Mar 2, 2011
I have Just got Fedora up and working and trying to setup my Epson V33 Scanner, I have downloaded the Driver packages from Avasys (http://avasys.jp/eng/linux_driver/) But when I try to install the iscan rpm package it tells me that I need libltdl.so.3, after doing some googling I have managed to find this rpm for Mandriva but I am unsure if installing this on Fedora would cause any problems?[URL].. When I looked on the Avasys site this is available as an rpm (or to be exact libltdl.so.7!)
View 1 Replies
ADVERTISEMENT
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Dec 4, 2010
I recently installed Fedora 14. Unfortunately, the scanner on my Epson CX3200 is not detected by the system. When i open 'Simple Scan', it shows i have a Epson CC-570L, and i don't know what to do to change it, so that it 'sees' my scanner. how i can change the scanner in 'Simple Scanner' to my CX3200?
View 2 Replies
View Related
Aug 4, 2010
The printer of my multi Epson CX5600 works fine, but when I run xsane I get the "No devices available" window. I tried running it as root with the same result. I have installed "iscan-firmware-2.1.1-1.fc12 (noarch) but it still wont work.h kernel 2.6.33.6-147.fc13.i686.
View 6 Replies
View Related
Feb 11, 2010
I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.
View 3 Replies
View Related
Mar 31, 2010
Looking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????
View 1 Replies
View Related
Dec 6, 2010
I am running ubuntu 10.04. I have an Epson Wprkforce 310 4 in 1. Connection is USB. I can print. I have searched for proper drivers for scanner and fax. I have found nothing for fax. I have found and installed at one time or another the following scanner drivers:
iscan_2.21.0-6.ltdl7_i386.deb
iscan_2.26.1-3_i386.deb
iscan-data_1.6.0-0_all.deb
iscan_2.26.1-3.ltdl7_i386.deb
The 1st 3 installed but nothing happened. When I installed the 4th, I got a message telling me about the scan app I have installed(default with ubuntu install). Hope welled up inside. When I opened the scan app, it said it could not find a scanner. WF 310 was on hoping for a driver.
View 1 Replies
View Related
May 17, 2011
I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:
Code:
root@Shuttle:/home/tfrei# scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:
Code:
root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
View 6 Replies
View Related
Apr 29, 2010
I have a debian server (squeezzy) amd 64, running with an epson BX-300f pluged to USB. And I want to share the scanner over my network. So let's do that, Intalled sane, sane utils, iscan, which I've downloaded from epson drivers and wich include epkowa drivers fro scanner to work..
after that I installed on my system (Ubuntu 9.10) xsane... on console I type:
root@bruno-laptop:/home/bruno# scanimage -L
*** glibc detected *** scanimage: free(): invalid pointer: 0x00be63d0 ***
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device 'v4l:/dev/video0' is a Noname HP Webcam virtual device
device 'net:192.168.0.254:gt68xx:libusb:001:035' is a unknown manufacturer unknown device -- use override to select flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
I don't know why I find so much things, if i only have one scanner. Then I opened xsane and found the scanner over network. I chose the epson with epkowa drivers I try to scan something but it dont output nothing and sometimes it gives me "end of file reached". I can put whatever config files here if you want to, just ask. One time it worked fine.. but only half of an image...
View 1 Replies
View Related
Jan 31, 2010
my all-in-one Epson scanner does not work. I tried to install the iscan drivers (free and/or proprietary) via repository and/or via Avasys website, but nothing happens: the scanner is not recognized. I use Gnome and openSUSE 11.2
View 3 Replies
View Related
Feb 2, 2010
Haven't been able to get my scanner to work on my Epson Stylus CX7450. XSane doesn't seem to support my scanner. Is there a way around this?
View 3 Replies
View Related
Mar 7, 2010
Have an Epson Expression 1640 XL A3 scanner (usb & network interface card). Bus=0002 Device=004 its usb ID is 0x04b8 0x0109 I have never been able to connect the scanner using the network - if anybody can advise, I would be very grateful. Quite happy to use this if usb is going to be a problem The scanner has worked very well through the usb and wask working well with 9.04(32bit). I have bought a new machine and did a fresh install of 9.10 (64bit) and the scanner is not detected.
xsane detects my webcams (vl4:/dev/video*)but no scanner Have run sudo xsane-find-scanner - only the webcams are detected Have edited /etc/sane.d/epson2.conf - added scanner usb ID, and added the lines:- usb /dev/usb/scanner0 usb /dev/usbscanner0 as advised in one of the threads in this forum sudo scanimage -L gave this-
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video1' is a Noname Creative Labs Webcam Pro Ex virtual device
device `v4l:/dev/video0' is a Noname Logitech QuickCam Pro 4000 virtual device
[code]....
Do I need to select M for these three modules?
the following had [M] -
USB Printer support
Microtek X6USB scanner support
It looks like the scanner module has not been loaded, and possibly the usbfs yet usb webcam and card readers are accessible. I have tried to keep outputs relevant & short. If I have omitted anything, you would like full results or any other information.
View 1 Replies
View Related
Jul 11, 2010
I currently have an EPSON Stylus SX400 that I've connected to my Dell Desktop running Ubuntu Lucid Linux. Though Ubuntu installed the printer at a great speed , it didn't install the scanner. Where can I get drivers to install the scanners, all the software I use do not discover a device?
View 2 Replies
View Related
Dec 5, 2010
I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:
1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.
View 9 Replies
View Related
Jan 4, 2011
I have an Epson CX4300 on Ubuntu 10.10 and I can't get it to scan. I loaded the driver for CX4200 since CX4300 isn't listed in [URL]
sane-find-scanner finds the scanner but scanimage doesn't:
ilan@ilan-main:~$ sane-find-scanner -q
found USB scanner (vendor=0x04b8, product=0x083f) at libusb:003:002
ilan@ilan-main:~$ scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
XSane also reports No Devices available and number 4 in their possible reasons is The backend is not loaded by SANE (man sane-dll). I get: ilan@ilan-main:~$ man sane-dll No manual entry for sane-dll
I do get a man for sane-epson so that hints that the epson driver exists. The fact that sane-dll doesn't seem to exist is probably the problem. I'm using libsane in the Synaptic Package Manager and that is supposed to supply the backends. Should it include sane-dll?
View 6 Replies
View Related
Oct 17, 2010
My printer failed recently and I was given a refurbished Epson stylus NX305 Printer scanner. Cannot get my system to recognize it. Running UberStudent (Debian based) Linux on a Dell Dimension. Have tried everything I could find on the web but nothing works. Scanner not recognized by software.
View 6 Replies
View Related
Mar 30, 2010
I have been given an Epson CX5000 3-in-1 that I only want to use the scanner part of (I have a laser and hate buying ink). The scanner works, tested under windoze, but xsane and scanimage -L fail to find it. But, lsusb does:
$ /sbin/lsusb
Bus 001 Device 003: ID 04b8:082b Seiko Epson Corp. Stylus DX5050
I saw a post about it under ubuntu that you had to modify
/etc/udev/rules.d/45-libsane.rules
Which doesn't exist on my Slackware 13 install. I hope this Epson runs faster than my Canon FB630U, which takes almost a four minutes to scan a 5x6 photo and forget scanning an 8.5x11 page (go take a nap).
View 2 Replies
View Related
Jan 27, 2011
I've done some investigating on the threads, but none of the normal fixes for this permission problem work. I've added myself to the scanner and lp groups. I've also added the right device code to the epson configuration file under /etc/sane.d/ . Scanner is recognized and works under root.
When I "scanimage >somefile" in the console I get a permission error when I'm a regular user; when I do the same under root, it works. Likewise, my graphical scan frontends report that they cannot find the scanner when I am a regular user. I see alien bob had an old workaround at [url] but I don't think 13.1 has hotplug set up the same way anymore.
View 8 Replies
View Related
May 18, 2011
I'm trying to set up my EPSON Stylus TX120 multifunction, and i've successfully installed the printer, and for the scanner i followd the instructions from avasys page: installed iscan-data and iscan (core) compiling them from source with no problems using --prefix=/usr in both packages, but when i run sane-find-scanner no scanner is found. If i try using scanimage -L only my webcam is listed, so, is there anything else i have to do in order to get my scanner detected in slack 13.37? I've run both commands as root, by the way.
View 6 Replies
View Related
Apr 29, 2010
I can't use my printer/scanner - it is an Epson TX110. When I try to use Image scan - I get the message; "Could not send the command to scanner. Check the scanner's status."
There is nothing wrong with the MFC apart from not working on Ubuntu 9.10. I have had it connected to another computer that ran Ubuntu 9.01 (I think that was the release used) and it ran fine but now I'm stuck -
I have drivers installed but cant get them to co-operate with me.
View 2 Replies
View Related
Aug 2, 2010
I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.
Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?
View 3 Replies
View Related
Jun 22, 2010
We recently got an Epson Stylus TX550W Printer/Scanner unit, shared over Wi-Fi with both Windows/Ubuntu PC's, while I have the printing working flawlessly, I don't know where to start to get the scanner working. I've Googled, but haven't come up with much, checked the Ubuntu documentation, apparently Ubuntu (9.10 & earlier, nothing about 10.04) don't automatically detect networked printers, is there a way to get it to recognize without editing config files, which I hate doing? I'm using Ubuntu 10.04 64-bit.
View 3 Replies
View Related
May 26, 2010
I installed Fedora 13 64 bit yesterday and so far so good. Except that it recognized my hp2100 printer scanner but it didn't work until I set up CUPS. I installed HPLIP and it doesn't see the printer even though it works. Now I would like to get the scanner to work, but simple scan doesn't see it. How do I get it to work?
View 2 Replies
View Related
Jan 24, 2010
I have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.
View 2 Replies
View Related
Mar 17, 2011
I am trying to set up my Epson Stylus SX420W printer (via USB) on a fresh install of 11.4. I have found a driver called 'epson-inkjet-printer-nx420-1.0.0-1lsb3.2.x86_64.rpm', which I guess is right for my Intel Core i5-system on the Avasys-site that Epson refers to for Linux drivers.
I have downloaded the driver and installed it via Right-Click -> Open With -> Install/Remove Software, which seemed to go well. When I open Yast -> Hardware -> Printer -> Add, my printer is found all right, but 'No matching driver found'. Iam quite new to Linux.
View 9 Replies
View Related
Feb 7, 2010
I've used windows all of my life, and never really looked at Linux, so thought it would be a good time to see outside of the box! I installed Ubuntu 9.10 a couple of weeks ago after reading a few Linux Newbie books and deciding it would be the best distro for me. Being completely new with Linux it's proving difficult doing certain things which I would have done with a couple of clicks in Windows, however I've managed to get past some of the problems after hours of searching and messing about. I managed to set my wireless network up, and with a great struggle my wireless printer using cups- which now seems to be printing fine over the network, its IP is 192.168.0.105. However even after reading lots of info and tutorials on Forums & Blogs nothing seems to work regards to my scanner (which is an all-in-one printer SX515W).
The information is completely overwhelming. I've been told to use iscan with the network plugin which I downloaded from [URL] after installing and running image scan or xscan the printer would scan for a couple of seconds and then it would stop, and I'd have to reset my printer. I read the documents supplied, blogs, and forums telling me to do certain things such as:
Code:
sudo gedit /etc/sane.d/epkowa.conf
add "net 192.168.0.105 1865"
sudo gedit /etc/sane.d/dll.conf
[code]....
Like I said, being new to Linux I'm completely lost with what I'm doing or what I should be listing here! This is my last resort really, if I still can't get this thing working I may just give up because it's so stressfull!
View 7 Replies
View Related
May 3, 2010
I switched from Sidux to Ubunbtu Lucid yesterday. On Sidux I had to struggle a little but to get this scanner working but at the end everything was fine. However on Lucid no success, I googled around and followed different instructions found in the www. sane-find-scanner and scanimage -L can find it (but it takes some time for scanimage -L) however I cannot scan and the scanner also does not react at all. The reaction of iscan and all the other scanning software is not consistent, error messages vary. A am thinking about switching back to some older Ubuntu version in case that I cannot get it running, I need the scanner in order to send fax
View 5 Replies
View Related
Dec 28, 2010
It seems that they are not shown under xev ...Someone knows if old scanner, can be detected in terms of button pressing ?[URL]button pressing does not show up into deamon.log
View 1 Replies
View Related
Jan 15, 2010
Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.
But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...
View 5 Replies
View Related
