Hardware :: Rtcwake On Sun V100 With Debian Lenny?
Jan 23, 2010
Doeas anyon know if rtcwake is supported on Sun V100 running Debian Lenny? See my attempt at using it below.
SV100-1:/sys/class/rtc# rtcwake -s 30
/sys/class/rtc/rtc0/device/power/wakeup: No such file or directory
rtcwake: /dev/rtc0 not enabled for wakeup events
SV100-1:/sys/class/rtc#
View 1 Replies
ADVERTISEMENT
Jan 24, 2010
I have not been able to get my Epson Perfection V100 scanner to work with Lenny. The correct driver files have been downloaded from Avasys and installed.
View 2 Replies
View Related
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Apr 25, 2011
In my laptop pc the following command doesn't work properly
Code:
rtcwake -m disk -s 1500
The pc reboots as usal after 1500 sec
[code]....
View 1 Replies
View Related
Sep 20, 2010
I'm trying to wake my ubuntu pc using an rtcwake event and pm-suspend. I basically use the scripts in this thread: [URL] I have by now tried everything I could imagine to get the box to wake up, but it just won't. I have the latest BIOS version and a quite new pc (ASUS M4A78LT-M LE motherboard). The BIOS clock is set to utc, and RTC alarms are enabled there. Does anyone have any new ideas I could try? I'm pretty surprised I can't get this to work because the same scripts work perfectly on another pc I have (which is actually older).
View 2 Replies
View Related
Dec 5, 2010
Sorry to post an answered question, but this site is google favorite, and I would like that this goes as easy as it can be for other users, so I'm hoping that if anybody searches for Epson Perfection V100 Photo for linux or Fedora Epson Perfection V100 finds this page.All the trick is to go to [URL]..
Install:
xsane
sane-backends (I installed this, but IDK if is necessary please some1 confirm this)
Download:
iscan-data-1.6.0-0.noarch.rpm
[Code]...
View 1 Replies
View Related
Jun 20, 2011
I'm using "sudo rtcwake -m disk -s 5000" or whatever the seconds is for the time I need it. It doesn't help if I use mem. Anyone know what's up or know a better program?
View 1 Replies
View Related
Sep 2, 2010
2.6.33.8-149.fc13.i686
When I was running FC10 my scanner just plugged in and worked. I must have lost something.
lsusb returns:
dmesg sees it. sane-find-scanner says:
scanimage -L returns:
And of course xsane/gimp say Not Avail. I've made sure all the (yum) sane sw is loaded and updated.
View 2 Replies
View Related
Jan 18, 2010
i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
View 3 Replies
View Related
Aug 20, 2010
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies
View Related
Nov 4, 2010
I have added a 10 Mbps network card to my SGI O2 MIPS workstation running Debian Lenny running the 26-2 kernel. The workstation already has an onboard NIC which is working fine.(eth0).
lspci -v shows ths card as:-00:03.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a) Flags: medium devsel, IRQ 18 I/O ports at 1800 [disabled] [size=32] Upon googling I found out that this card is an NE2000 clone. I downloaded the latest 2.6.36 kernel sources and did the following:-
1. Make Menuconfig
2. Loaded an alternate kernel config file (my working kernel config file)
3. In DeviceDrivers->Network device support->Ethernet (10 or 100 Mbit)
I selected ASIX AX88796 as the help associated with this showed it as an NE 2000 clone. configured it to be a module and did make, make_modules and make_install. Edited /etc/Modules to load ax88796 and added an alias eth1 ax88796 to this file. copied the new kernel to the /boot and did a reboot, the machine booted up fine and udev -r showed the 2.6.36 kernel and lsmod showed ax88796 loaded. But, Iam not able to bring up eth1 using:-
ifup eth1
The error messages given are:-
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
View 1 Replies
View Related
Apr 23, 2010
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies
View Related
Aug 28, 2010
Are exist any repository for debian lenny with games like nexuiz vdrift planeshift etc?
View 2 Replies
View Related
Dec 18, 2010
I could't find the 64bit Debian Lenny OS for Intel architecture.Hence I have installed amd64 and it is working fine.Does both intel and amd have the same 64 bit OS amd64 ?
View 3 Replies
View Related
Mar 24, 2010
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies
View Related
May 3, 2010
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies
View Related
Apr 14, 2010
I have read tons of articles on how but none work. I have edited the source.list file with what they say and I have used all the terminal commands that are becoming very repetitive.
View 11 Replies
View Related
Oct 2, 2009
is there a way to auto login as root? login in window preferences won't allow me to select rootPS before anyone starts on the me bad, I'm a programmer using it on a closed embedded system, and need to link to others software, and need to be root
View 6 Replies
View Related
Apr 16, 2010
I installed Debian Lenny on my old IBM thinkpad R40e but i can't change the brightness either with the Fn keys or with the brightness control debian has. i have searched around and it seems to be a problem with linux on IBM thinkpads but i don't know that much about this sort of thing so any help would be appreciated. if you need any more info then just ask.
View 9 Replies
View Related
Aug 31, 2010
Most of the time I rebooting, my resolv.conf is getting updated by resolvconf program, so the network connection cannot be reached. I followed this: Debian User Forums - View topic - Solving DNS problem (dhclient & resolv.conf)
View 7 Replies
View Related
Aug 21, 2009
Could anyone tell me how to get Debian Lenny to automount CDs the same as Ubuntu does i.e. automatically, with a Desktop icon etc.I've worked out how to automount CDs using autofs, which is OK, but it still doesn't seem quite as good as the way Ubuntu does it.
View 6 Replies
View Related
Mar 29, 2011
I have problem with loging, actually iptables logs a data but it seems that for some reasons does not writes in a log file:
Code:
iptables -L -v
Chain INPUT (policy ACCEPT 406 packets, 124K bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT tcp -- any any xxxxxxxxxxx anywhere tcp dpt:xxxx
[Code]....
i checked /var/log/message and /var/log/syslog nothing is here related to iptables. then i create separate file for Iptables by adding this: kern.warning /var/log/iptables.log in my rsyslog.conf it does create iptables.log file inside /var/ but its still empty
View 4 Replies
View Related
Aug 16, 2010
I've found that I need to use pppoeconf, but it doesn't work. I have default Debian kernel with PPPOE module. After looking for the modem it gives me the following message:"Sorry, I scanned 1 interface, but the Access Concentrator of you provider did not respond. Please check your network and modem cables. Another reason for the scan failure may also another pppoe process which controls the modem."pppoeconf detected the interface successfully (eth0, I have only one interface), but doesn't work. It does, however, work with my router connecting without any issues.
View 4 Replies
View Related
Apr 2, 2010
User familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies
View Related
Jul 12, 2010
I've just upgraded a server to Lenny; everything went smoothly I'm glad to say, except that now my version of PHP is 5.2.6, and I want 5.2.9.
Here's my sources.list:
View 5 Replies
View Related
May 8, 2010
have you ever encounter such problem that the g2c lib can not be find in lenny debian when using gcc -lg2c ... I have tried several methods but failed to solve it. I use the apt-file search g2c and find that libg2c0: /usr/lib/lig2c.so.0. However, it looks could not work. I wonder if I should install the g77 compiler which is no in lenny, but I don't know how to install g77.
View 2 Replies
View Related
Jul 16, 2010
I want to add a deb repo for Debian Lenny so that I can install libasound2. The name of the repo required is given as 1.0.22-2~bpo50+2. All the repositories in my /etc/apt/ources.list file begins with either deb http: or deb ftp. Do I write dep 1.0.22-2~bpo50+2?
View 4 Replies
View Related
Jan 24, 2011
I have Lenny 5.0 and would like to upgrade to 5.0.8 or the latest upgrade for Lenny. I don't know if it would be easier to download the 5.0.8 version or just upgrade the 5.0. Frank
View 3 Replies
View Related
Feb 13, 2011
Now that the stable version of Squeeze is available, the newbie that I am is asking himself this almost existential question: should I get Squeeze or stick to Lenny?Some arguments in favors of Lenny that are coming into his mind are that there is more material, tutorials, in brief, more resources to find as to learn and solve problems.
But is this true and if yes, is it a reason?What about security?There is also this widespread saying that tells to always get the last release for performance and security reasons.Being in this position where I obviously don't have a lot of knowledge and experience to judge myself with all the elements, assessing thoroughly all the differents factors, I would have like to listen you opinion(s) on it.
View 12 Replies
View Related
Dec 28, 2010
I installed with no problem. I have 2 hd's one with winxp3-32bit the other with debain-amd64. When i move a window on the desktop or try to scroll in a window the text gets out of whack and computer locks up.
asus a8n32 sli deluxe mobo
2 nvidia 7800gt's...in sli
segate barraccuda 500g hd(winxp)
wd 200g hd(linux)
View 5 Replies
View Related