I got a Huawei USB dongle (modem) that I use to access the internet. This of course required usb_modeswitch. My question is, how can I remove the storage functionality completely so that it does not show up anymore among the drives and simply be visible as ONLY a modem?
View 1 RepliesTrying to use Huawei E153 dongle with FC13, but had no luck.
"lsusb" returned following:
I tried "usb-modeswitch-1.1.7" too, but I couldn't install it.
Errors which I got are listed in attached error.txt file.
Need a bit of help with this have got the broadband side working lovely on Mandriva linux but it should show as a removable drive in fact in windows it shows as two on linux none its as if there not there.Can anyone point me in rite direction to sort this.it sort of see but it just is not available normally removable drives just come up
View 1 Replies View RelatedAnyone know how can get a vodafone huawei 4511 dongle working on ubuntu?
I've spent several hours reading stuff, most of which is way above my head.
I plug it in, set it up in "edit connections". Nothing happens.
It shows up in disk utility twice, as a usb vodaphone storage (huawei) and cd drive (vodafone cd rom)
I switched from puppy to ubuntu because I read that you could just plug dongles into ubuntu and they would be recognized. (Spent many many hours trying to get it working in puppy.)
Does anyone yet know of any Linux distro which offers native support for this usb HSDPSA dongle?
Failing that, any distro which can be hooked up to it with minimal tinkering.
Does anyone know how to connect to Huawei E122 Mobile dongle? I used to connect to E169 usb stick via umtston.
View 3 Replies View RelatedI'm new here. This is my first post. Something tells me my problem will be met with great sighs and shrugs of shoulders. I think you may have heard this problem just a few thousand times. couple of days ago i took the plunge and installed Ubuntu 9.10. I already run XP Pro. I have the system set for dual booting until i get to grips with Linux and have all that i use daily from software to hardware comprehesively installed and running. then i have this ideal romantic dream of dumping my microsoft heartache, and living a happy life with the new love in town (an OS that works!)
Vodafone (Huawei K3520) mobile broadband dongle. Yes i know its a touchy subject but i am going cross-eyed reading info on various forums from this one to the betavine forums and a detour through vodafone themselves. I just can't find clear concise info on how to get this dongle up and running with Ubuntu. My laptop is Acer Aspire 5633 WLMi. I would really really appreciate your help on this subject i need to get online with this dongle and Ubuntu.
I have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
I know a bunch of commands and I am comfortable using the terminal, I even set a powerpc server but I can't figure out how to remove epiphany on this new computer I'm setting up. I didn't install anything with tasksel. I installed gnome and xorg afterwards... I load it up and 'startx' just fine. then I check around for the programs that were installed. I lik'em gimp, lot's of utilities. gedit. anyway I find epiphany, which I have already established that I dislike, I immediately go to the root terminal (another nice program that comes with gnome) and type apt-get remove epiphany-browser-data the output says it will be deleting gnome... however I have researched and found these are simpy meta packages that don't really matter.... however under the section that states all the packages that will be removed by autoremove there is a huge list... I doubt these packages are safe to remove. how to remove epiphany without removing a huge amount of probably needed software
View 14 Replies View RelatedWhat include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedI am running Raspbian on a Raspberry Pi...I have read that the v2 version of this dongle does not work directly out of the box.Their are multiple tutorials online which provide some pre-compiled files that can be dragged and dropped into some directories and it allows the dongle to work. URL....
However, I would rather download and compile from scratch myself but am unsure how to do this.The raw driver files are available on github here. URL....
(many authors providing pre-compiled files confirm they got the original files from here too).I have used wget and performed the following
mkdir wifiSetup
mv master.zip wifiSetup
cd wifiSetup
unzip master.zip
[code]...
I purchased 2 CSR V4.0 dongles which work fine, one in Deb8 and one in a Win7 laptop. The only problem is they both have the same mac address so my Samsung Tabs get confused. I have thoroughly researched how to change these but most of the suggestions want a dev reference such as wlano or eth0 which USB dongles do not have a dev id.
The only alternative is to use bdaddr which comes with the bluez package but it must be compiled with the --enable-tools option.
When I try to compile I get the error "error:D-Bus library is required". When I check the config.log it suggests:
"Package dbus-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `dbus-1.pc' to the PKG_CONFIG_PATH environment variable".
Dbus is installed on my system but I could not find dbus-1.pc. The only reference was the directory "/usr/share/dbus-1" so I added it to my $PATH variable. This did work.
I have a AWU212n wifi dongle that I would like to use to get a debian computer to connect to connect to the network. There aren't any linux drivers and it seems to need a realtek program to connect. I'm running debian Squeeze. Wine doesn't work to run the installer, I don't know if I copied the realtek program from a windows computer and ran it with wine if it would work then or not.
View 1 Replies View RelatedI have a USB huawei ec1262 wireless internet stick from Reliance. I google'd on how to install it. I am using Debian Lenny. I know that there is a "mode-switch" package that needs to be installed but this is not available on the down load package list for Debian. i can find this & also instructions if possible on how to get this working on my Lenny system .
View 5 Replies View Relatedi have a pc running debian and may be without a home broadband connection for a few days.is it easy or indeed possible to run a debian pc with a usb dongle?
View 9 Replies View Related1) does squeezy allows out of the box work for huwai dongle/ mobile broadband? (i never was able to configure mobile broadband in lenny thus i couldn't have kept lenny in my pc for more than 3 hours)
2) if i install squeezy (which status is 'testing' at the time being), do i need to reinstall squeezy once it becomes 'stable'?
3) any major difference between squeezy/debian and ubuntu?
I purchased a ASUS USB-BT211 Bluetooth Dongle and I'l like to get it to working in Debian 6.0 Squeeze 64 bit.
uname -r gives....
I plugged in the USB Dongle:
lsusb gives....
lsusb -v -d 0cf3:3000 gives...
cannot read device status, Operation not permitted (1) larry@debian:~$
What do I need to do to get the Bluetooth Dongle Functional?
I've just installed Debian 7.6.0 with KDE onto my laptop and now I want to connect to the internet with my Mobile Broadband dongle. When it's plugged in, I follow the icon in the taskbar to the Network Connections window.
Then I try to add a MBB instance with the pop-up assistant. After I've answered all the questions another pop-up tells me:-
"Insufficient privileges"
What's going wrong here and how do I get Debian to work the dongle (which works on my Desktop Debian 7.5.0 that uses Gnome)?
I'm using a wired ethernet dongle due to my machine not having an ethernet port, however it sometimes drop connection, how can I diagnose whether if the dongle is faulty or my system is having trouble maintaining a connection.
View 14 Replies View RelatedI've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:
DefaultVendor= 0x12d1
DefaultProduct= 0×1446
TargetVendor= 0x12d1
[code]....
i get a 16GB udisk here, and all I want to do is to create a two partition udisk, the first one keep storaging my data, which could be recognized by almost all OS, and the second one, hold a live system(just say, debian). Now, I have created two partition by `fdisk`, sdc1 is FAT32, and sdc2 is FAT16.I have RTFM for a long time and, tried syslinux, but failed everytime. Sometimes can not boot, sometimes can boot successfully but can not enter the system.
View 12 Replies View RelatedI hope this post is in the right area of the forum.I am searching for the right operating system and application(s) to build a cloud data storage server business like Backblaze.Backblaze uses Debian but uses their own custom application to manage the data, uploads, accounts, encryption, etc... So my real question here is: does anyone have any recommendations for existing application(s) I could use on top of Debian to handle this stuff?
View 1 Replies View RelatedWhen I connect a USB stick to my laptop, it is mounted as root:root. I want ot be able to use it as the logged in user
It has worked in the past (1+ month ago), but recently it just mount it as root:root.
My userid is 1000, so somewhere in the system it knows that the current user is relevant.
The directory created
The date is off System time is correct - so this could be an indication of what is wrong.
I have tried with my own custom compiled kernel and now I am using the latest 2.6.38 official image.
I get #1030 - Got error 28 from storage engine from mysql while i phpmyadmin, i am able to get info from the database while im on my site.
The disk isnt full so im guesing it could be some user access, but how do i check this?, and fix it?
I bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.
View 9 Replies View RelatedCode:
#include <iostream>
using namespace std;
[code]...
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedI am having problems installing Debian 7.7 i386 on the newest HP DL380 GEN9 server with P440ar storage array. The disk detection during installation fails to detect the array.
I have pinpointed the problem to hpsa.ko driver to be outdated as I need a minimum version from September 2014. I have already tried following the guide on " [URL]" but the driver compiling from sources fails (guide is from 2012).
Here is where I got the latest sources: [URL]....
Is there any possible way to install this debian version with this storage array? Newer kernel version is really not an option for me.
"3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux"